Imalent
Page 1 of 42 1234567811 ... LastLast
Results 1 to 30 of 1251

Thread: P60 sized led drop-ins (part 3)

  1. #1
    Flashaholic
    Join Date
    Oct 2006
    Location
    South West Michigan
    Posts
    138

    Default P60 sized led drop-ins (part 3)

    [Continued from Part 2]

    While reading the thread titled "Dealextreme drop in for G2, 6P, etc???" I started making a list of the drop-in's I saw. It got a little out of hand.
    I thought I would put the list out here instead of buried 10 pages in to the above thread (no offense to the guys and gals in said thread )

    ** Don't forget to check out the P60 Flashlight List {host} post as well. (and add to it if you can ) **

    ** BatteryJunction.com **

    THRUNITE P60 Style Cree XP-G R5 LED Drop In - 3 mode
    http://www.batteryjunction.com/thrun...de-p60-r5.html
    $34.95
    300 Lumens (1A Drive Current) (Tested 260 OTF per MrGman)
    2.7-9V input voltage
    Cree XP-G R5 LED
    Outer spring is removable for some fitments
    Alumium textured/OP reflector with bronze heatsink base
    Bezel diameter: 26.5mm
    Copper base diameter: 19mm
    Height including support spring: 36.7mm
    Height excluding support spring: 28.8m

    THRUNITE P60 Style Cree XP-G R5 LED Drop In - 1 Mode
    http://www.batteryjunction.com/thrunite-p60-r5.html
    $32.95
    300 Lumens (1A Drive Current) (Tested 260 OTF per MrGman)
    2.7-9V input voltage
    Cree XP-G R5 LED
    Outer spring is removable for some fitments
    Alumium textured/OP reflector with bronze heatsink base
    Bezel diameter: 26.5mm
    Copper base diameter: 19mm
    Height including support spring: 36.7mm
    Height excluding support spring: 28.8m

    P60 Style Cree R2 LED Drop In - 1 Mode
    http://www.batteryjunction.com/1-mod...pgrade-r2.html
    Regular Price: $39.95
    Sale Price: $19.95
    225 Lumens (1.1A Drive Current)
    3.6-18V input voltage
    Outer spring is removable for some fitments
    Alumium textured/OP reflector with copper heatsink base
    Bezel diameter: 26.5mm
    Copper base diameter: 19mm
    Height including support spring: 36.7mm
    Height excluding support spring: 28.8mm

    P60 Style Cree R2 LED Drop In - 225 Lumens - 5 Mode
    http://www.batteryjunction.com/5-mod...pgrade-r2.html
    Regular Price: $42.95
    Sale Price: $21.95
    225 Lumens (1.1A Drive Current)
    3.6-18V input voltage
    High/Medium/Low Output PLUS Strobe & SOS Modes
    Hi (225 lumens) > Mid (130 lumens) > low (80 lumens) > Strobe > SOS
    Cycle level/mode with soft press (most clickies work) to switch level/mode
    Outer spring is removable for some fitments
    Alumium textured/OP reflector with copper heatsink base

    P60 Style UV UltraViolet LED Drop In Flashlight Upgrade Engine 395-405nm
    http://www.batteryjunction.com/p60-uv-buld.html
    Regular Price: $34.95
    Sale Price: $19.95
    3-Watt UV LED Drop-in for Surefire and other P60/P61 etc style lamp and bulb lights.
    DC-DC regulated for 3V-9V. Able to take 2 x CR123A,2 X RCR123A 3V or 1 x 18650 3.7V
    Wavelength = 395nm - 400 nm

    P60 Style 940NM InfaRed IR Drop In
    http://www.batteryjunction.com/infra...0-drop-in.html
    Regular Price: $49.95
    Sale Price: $24.95
    940NM output
    6-8.4V input voltage
    Outer spring is removable for some fitments
    Alumium textured/OP reflector with copper heatsink base

    Surefire P60L LED Assembly
    http://www.batteryjunction.com/surefire-p60l.html
    Price: $49.00
    Max Output: 80 lumens; Runtime: Up to 12 hours, depending on flashlight model
    Precision reflector helps create a smooth, flawless, user-friendly beam
    Fits in SC1 Spares Carrier for field deployment

    ** Lumens Factory **
    http://www.lumensfactory.com/cart.ph...2&sub_cat_id=7

    D26-LED High Output Single Mode LED Reflector Module (3.6V-13V)
    $24.00 - 3.6V to 13V Regulated Input for Maximum Flexibility - High Output Cree XR-E, R2 LED
    Maximum Current Output at 1000mA - High Colour Temperature (Cool White, 5000K-10000K according to Cree)
    High Temperature Resistant Orange Peel Coating - Every Reflector Module is Pre-Focused for the Ultimate Spot

    D26-LED Selected Warmer Tint Version (Limited Quantity) (3.6V-13V)
    $28.00 - 3.6V-13V Regulated Input - Maximum Current Output at 1000mA - High Output Cree XR-E, R2 LED
    Selected using Integrated Photometric Sphere to have Warmer Colour Temperature (5000K-5500K)
    High Temperature Resistant Orange Peel Coating - Every Reflector Module is Pre-Focused for the Ultimate Spot

    D26-LED 3.6V Special LED Module (Selected Tint)
    $28.00 - High Output Single Mode, Cree XR-E, R2 LED
    Designed for 3.6V Rechargeable Applications, Input 2.4V to 4.2V (general voltage range of one 3.6V li-ion rechargeable battery)
    Maximum Current Output at 1200mA Constant Output at 1000-1200mA, Warmer Colour Temperature (5000K-5500K)

    D26-LED 3 Mode (Low-Mid-High, Memory) LED Module (3V-3.7V)
    $28.00 - Cree XR-E, R2 LED, Warmer Colour Temperature (5000K-5500K)
    3V-3.7V Regulated Input, 3 Mode (Low-Mid-High with Memory, 5%-30%-100%)
    Orange Peel

    D26-LED 3 Mode (Low-Mid-High, Memory) (6V-13V)
    $28.00 - Cree XR-E, R2 LED, Warmer Colour Temperature (5000K-5500K)
    6V to 13V Regulated Input, Orange Peel

    ** Dealextreme **

    Ultrafire Cree, Regulator, Reflector 1x18650 2xCR123A Lamp Assembly
    http://www.dealextreme.com/details.dx/sku.13143
    $10.40 accepted voltage: 3.6V ~ 9.0V 900mAh regulator board Orange-peel aluminum reflector

    3W Cree, Regulator, Reflector 1x18650 2xCR123A Module Set
    http://www.dealextreme.com/details.dx/sku.14247
    $12.80 accepted voltage: 3.6V ~ 9.0V 900mAh regulator board Orange-peel aluminum reflector

    DX 3W Cree Module CM1
    http://www.dealextreme.com/details.dx/sku.32314
    $10.82 3.2V~9.0V Input
    Beamshots + review at: http://www.light-reviews.com/cm1/

    SSC 42180-T 3W Emitter Reflector Driver Module
    http://www.dealextreme.com/details.dx/sku.44068
    $13.79 Input voltage: 3.7V ~ 8.0V Current: 900mA

    3W Cree Drop-in Module (supports Surefire 6P)
    http://www.dealextreme.com/details.dx/sku.60590
    $7.73 3V~18V, textured aluminum reflector

    Cree 5-Mode Emitter Reflector and Driver Module
    http://www.dealextreme.com/details.dx/sku.42696
    $9.97 Typical driving voltage: 3.7V (maximum voltage: 4.2V. Do not exceed.)

    Cree Drop-in Module for Surefire 6P
    http://www.dealextreme.com/details.dx/sku.60776
    $7.73 Voltage Range: 2.9V ~ 9V

    Cree Drop-in Module
    http://www.dealextreme.com/details.dx/sku.71862
    $12.48 Ultrafire 4-Mode 3.7V~6V

    KLC8 LED Emitter with Driver and Reflector Module Set
    http://www.dealextreme.com/details.dx/sku.88935
    $9.90 (3.7V~6.5V Input)

    Q5-WC 3-Mode 0~100% LED Drop-In Module
    http://www.dealextreme.com/details.dx/sku.111074
    $16.90 3-Mode: 0~100% (adjustable) > Strobe > SOS 3.7V
    Review: http://www.light-reviews.com/dx_sku_11074/

    Cree Q5 LED Drop-in Module
    http://www.dealextreme.com/details.dx/sku.112621
    $8.69 Input Voltage Range: 3.7V~18V Maximum Output: 200 Lumens

    Cree Q5 LED 5-Mode Drop-in Module
    http://www.dealextreme.com/details.dx/sku.113622
    $12.96 3.6V~7.2V Input, Current and lumens are rated by the manufacturer
    1. Low 25mA, 80LM
    2. Mid 550mA, 120LM
    3. High 950mA, 200LM
    4. Strobe 800mA, 250LM
    5. SOS 800mA, 200LM

    Cree R2 Drop-In 1-Mode LED Module
    http://www.dealextreme.com/details.dx/sku.118346
    $9.10, Input: 3.7V~18V, Output: 117~225 Lumens (manufacturer rated)

    Cree P4 1-Mode LED Drop-In Module
    http://www.dealextreme.com/details.dx/sku.118150
    $9.53 Input: 3V~12V

    Cree Q2 LED Drop-In Module for WF-502B and Similar Flashlights
    http://www.dealextreme.com/details.dx/sku.125061
    $11.29, 3.6V~12V Input, Single mode regulated circuitry

    Cree XR-E R2-WC 5-Mode 250-Lumen LED Drop-in
    http://www.dealextreme.com/details.dx/sku.137658
    $10.56 Input: 3.6V - 8.4V, Reflector: Textured, Memory: Unknown
    Modes: High (250 lumens) > Mid (150 lumens) > low (80~100 lumens) > Strobe > SOS

    Cree XR-E Q5 1-Mode Drop-in LED
    http://www.dealextreme.com/details.dx/sku.138802
    $11.80 Input: 3.7V - 12V, Textured aluminum reflector

    Cree R2-WC 250-Lumen 5-Mode Memory Drop-in LED
    http://www.dealextreme.com/details.dx/sku.144492
    $11.73 - Input voltage range: 3.0V~8.4V - - Maximum brightness: 250 lumens (manufacturer rated)
    5-Mode driver circuitry with mode memory: Hi > Mid > Lo > Strobe > SOS - Alumium textured/OP reflector

    Cree R2-WC 3-Mode + 0~100% LED Drop-in
    http://www.dealextreme.com/details.dx/sku.1759003
    $11.39, Input: 3.6V~8.4V, Cree XR-E R2-WC LED,
    200 lumens (manufacturer rated), Aluminum textured reflector

    P4-WC 3-Mode 0~100% LED Drop-In Module
    http://www.dealextreme.com/details.dx/sku.111075
    $13.85 - Voltage Input: 3V ~ 15V, Cree P4 (color WC) Emitter (190 Lumens max)
    DX says 3 Mode: 0~100% (adjustable) > Strobe > SOS. However users are reporting that it's now a 5-mode (Lo, Med, Hi, Strobe, SOS).

    Cree MC-E LED 3-Mode 410-Lumen Drop-in Module w/Copper Heatsink Base
    http://www.dealextreme.com/details.dx/sku.212037
    $23.49 - Emitter Type: Cree MC-E - BIN: K-WC - Voltage Input: 2.7V~4.2V
    Mode Arrangement: Hi (2800mA, 410LM) > Lo (1000mA, 100LM) > Strobe (1500mA, 200LM)
    Update: Reacently tested by MrGman over in the Actual Lumens readings in 6" dia. Lab Sphere IS with SC 5500 control thread. Readings were:
    DX_MC-E High - 385 lumens turn-on - 345 lumens warm. Low 150 lumens warm.

    Cree XPE-WC-R2 5-Mode LED Drop-in
    http://www.dealextreme.com/details.dx/sku.253369
    $11.66 - XPE-WC R2, Voltage Input 2.6~4.2V, 4.2V max
    Hi 280LM 1200mA > Mid 200LM 800mA > Low 120LM 500mA > Fast Strobe 200LM 1000mA > SOS 250LM 1200mA

    __

    ** BugOutGearUSA **
    http://www.bugoutgearusa.com/

    Cree R2 Drop-In Module
    http://www.bugoutgearusa.com/crq5drmo.html
    $47.95
    Approx. 240 Lumen
    Cree R2 LED Driven at 950mAH
    3+ Hours Total Runtime
    Regulated
    Input Voltage: 4.5V - 12V
    Shock/Recoil Proof
    10,000 Hour LED Life
    Aluminum Reflector
    Brass Heat Sink
    Improved Beam Pattern
    __

    ** Kaidomain **

    UltraFire SST-50 3.7V~4.2V
    http://www.kaidomain.com/ProductDeta...oductID=110277
    $51.16
    3-Mode OP/SMO Aluminum Reflector

    Cree Q5 Drop-In 1-Mode LED Module
    http://www.kaidomain.com/ProductDeta...roductId=12775
    $9.34 Voltage Range: 3V~18V

    Cree R2 Drop-In 1-Mode LED Module
    http://www.kaidomain.com/ProductDeta...roductId=13769
    $9.49 Voltage Range: 3.7V~18V, Output: 117~225 Lumens (manufacturer rated)

    CREE XR-E P4, 6P Drop-in Module
    http://www.kaidomain.com/ProductDeta...roductId=14634
    $8.94 Voltage Range: 2.7V - 6V
    Runtime:
    About 1.7 hours on two 3.0V CR123A cells
    About 2.5 hours on 17670 Li-ion cell
    About 3.5 hours on 18650 Li-ion cell

    K2 LED Drop-in (26mm)
    http://www.kaidomain.com/ProductDeta...roductId=45880
    $6.90

    CREE MC-E K bin 26.5mm 3.7V~4.2V OP Aluminum Lamp
    http://www.kaidomain.com/ProductDeta...roductId=71614
    $25.99

    CREE Q5 3.7~4.2V 5-Mode Drop-in
    http://www.kaidomain.com/ProductDeta...roductId=64736
    $9.44

    CREE R2 3.7~4.2V 1-Mode Drop
    http://www.kaidomain.com/ProductDeta...roductId=64835
    $7.97 - 180 Lumens

    Solar Force CREE R2-M Model 5 (26.5mm) 3.7V Lamp
    http://www.kaidomain.com/ProductDeta...roductId=59236
    $20.50

    CREE P4 One Mode (3.7V~4.2V) Lamp
    http://www.kaidomain.com/ProductDeta...roductId=50091
    $7.45

    SolarForce CREE R2-M Model 5 (26.5mm) Lamp Drop-in
    http://www.kaidomain.com/ProductDeta...roductId=50086
    $20.15 - Modes:Low/Mid/High/Strobe/SOS - Voltage input range 3.0V~8.4V
    Voltage & Current (DC Power Supply) 3.0V~110mA,8.4V~580mA - Lumen: 230

    Solar Force CREE R2 (26.5mm) Lamp 1-mode Drop-in
    http://www.kaidomain.com/ProductDeta...roductId=51085
    $19.36 - Reflector: OP Aluminum - Lumen: 230 - Voltage input range 3.0V~8.4V

    3.7V~4.2V CREE XPG R5 WC LED 5-mode Lamp
    http://kaidomain.com/ProductDetails....oductId=102064
    $14.86
    CREE XPG R5
    200lumen/90minutes
    Modes High/Mid/Low/Strobe/SOS

    CREE XPE-Q3 5A Warm White 5-mode LED
    http://www.kaidomain.com/ProductDeta...roductId=93770
    $10.00
    3.7*4.2 voltage
    OP Aluminum reflector

    --

    ** Malkoff Devices - http://www.malkoffdevices.com/ **
    http://www.malkoffdevices.com/shop/d...re-c-1_14.html

    M60 Mod to fit Surefire
    $55.00 - Input voltage 3.8V - 9V, Current Draw 750ma at 6 volts, Led is a Cree XRE 7090
    Runtime is 1 1/2+ hours on 2 CR123 primary batteries, solid brass heatsink construction
    Utilizes a Cree 8 degree optic.

    M60F 20 Degree Flood
    $55.00 - Input voltage 3.8V - 9V, Current Draw 750ma at 6 volts, Led is a Cree XRE 7090
    Runtime is 1 1/2+ hours on 2 CR123 primary batteries, solid brass heatsink construction
    output is 220+ lumens, The optic produces an outstanding room lighting beam.
    Throw is typically limited to approximately 120+/- feet. Utilizes a Cree 20 degree optic

    M60L (Low Output)
    $55.00 - Input voltage 3.8V - 9V, Current Draw 350ma at 6 volts, Led is a Cree XRE 7090
    Runtime is 4 1/2+ hours on 2 CR123 primary batteries, solid brass heatsink construction
    output is 140+/- lumens, Utilizes a Cree 8 degree optic

    M60LF (Low output - Flood)
    $55.00 - Input voltage 3.8V - 9V, Current Draw 350ma at 6 volts, Led is a Cree XRE 7090 Q5 WG tint
    Runtime is 4 1/2+ hours on 2 CR123 primary batteries, solid brass heatsink construction
    output is 140+/- lumens, The optic produces an outstanding room lighting beam.
    Throw is typically limited to approximately 100+/- feet. Utilizes a Khatod 25 degree optic

    M60LL (Low Low output)
    $55.00 - Input voltage 3.8V - 9V, Current Draw 170ma at 6 volts, Led is a Cree XRE 7090
    Runtime is 8 +/- hours on 2 CR123 primary batteries, solid brass heatsink construction
    output is 80 +/- lumens, Utilizes a Cree 8 degree optic

    M30 to fit a Surefire
    $55.00 Input voltage is 1-5.5 volts, The output is approximately 235+ lumens at 3.3v+ and 160+ lumens at 3v.
    The runtime is 1 1/4+ hours on one CR123 primary battery. The LED is a Cree XRE 7090.
    This design utilizes a Cree 8 degree optic.

    M30W (warm tint beam)
    $55.00 The input voltage is 1-5.5 volts. The output is approximately 170 lumens at 3.3v+ and 120 lumens at 3v.
    The runtime is 1 1/4+ hours on one CR123 primary battery. The LED is a Cree XRE 7090.
    This design utilizes a Cree 8 degree optic.

    M60W (warm tint beam)
    $55.00 The input voltage is 3.8 - 9 volts. Below 3.8 volts it will drop out of regulation and run direct drive.
    The output is approximately 170 lumens. Runtime is 1 1/2+ hours on 2 CR123's. This design utilizes a Cree 8 degree optic.
    The LED is a Cree XRE 7090.

    M60WF (warm tint, flood)
    $55.00 The input voltage is 3.8 - 9 volts. Below 3.8 volts it will drop out of regulation and run direct drive.
    The output is approximately 170 lumens. The runtime is 1 1/2+ hours on 2 CR123's. This design utilizes a Cree 20 degree optic.
    The LED is a Cree XRE 7090.

    __

    ** Wolf Eyes drop-ins ** http://www.pts-flashlights.com/produ...d=1-25-114-147 **

    Wolf Eyes - D26 3.7-13V Cree R2 WC LED Drop-in
    http://www.pts-flashlights.com/produ...5-114-147-6518
    $63.99
    Cree R2 WC bin HO 3.7V-13V D26
    Output: 280 lumens
    Voltage: 3.7V-13V

    Wolf Eyes - D26 3.7-6V Cree R2 WC LED 2-Mode High & Low
    http://www.pts-flashlights.com/produ...5-114-147-6524
    $68.99
    Digital Cree R2 WC Bin LED HO 3.7V-6V D26 lamp assembly.
    Output: 280 lumens
    Voltage: 3.7V-6V

    Wolf Eyes - D26 3.7-6V Cree R2 WC LED 2-Mode Tactical Strobe
    http://www.pts-flashlights.com/produ...5-114-147-6520
    $69.99
    Cree R2 WC Bin LED HO 3.7V-6V D26 lamp assembly.
    Output: 280 lumens
    Voltage: 3.7V-6V

    Wolf Eyes - D26 3.7-6V Cree R2 WC LED 4-Mode
    http://www.pts-flashlights.com/produ...5-114-147-6526
    $68.99
    Digital Cree R2 WC Bin LED HO 3.7V-6V D26 lamp assembly.
    Output: 280 lumens
    Voltage: 3.7V-6V
    Circuit sequence: 100% (280 lumens), 20% and 2% for low.

    D26 3.7-6V Cree R2 WC LED Drop-in *Low VF*
    http://www.pts-flashlights.com/produ...5-114-147-6516
    $59.99
    Cree R2 WC Bin LED HO 3.7V-6V D26 lamp assembly.
    Output: 280 lumens
    Voltage: 3.7V-6V

    __

    ** Lighthound.com ** -

    Lighthound Cree Drop-In
    http://www.lighthound.com/index.asp?...OD&ProdID=2605
    $19.99 accepted voltage: 3V ~ 12.6V up to 240 lumens
    LOP (Light Orange Peel) textured aluminum reflector

    UNIQ Cree Q5 Drop-In
    http://www.lighthound.com/index.asp?...OD&ProdID=3513
    $17.99, 3.7 - 15V Input, 1000mA, Textured aluminum reflector

    Solarforce LC-1 Drop-In with Cree R2 LED - Single Mode
    http://www.lighthound.com/Solarforce...de_p_1633.html
    $19.99 - Cree LED and an aluminum reflector (light orange-peel-textured reflective coating)
    Single Level Constant Output, Input voltage: 3V-12.6V
    Compatible with the Solarforce L2 and Surefire’s P-series flashlights

    Solarforce LC-5 Drop-In with Cree R2 LED - Five Modes with Memory
    http://www.lighthound.com/Solarforce...ry_p_1634.html
    $24.99 - Cree LED and an aluminum reflector (light orange-peel-textured reflective coating)
    3 Levels+Flashing+SOS-signaling, Input voltage: 3V-8.4V
    __


    **Dereelight drop ins**
    1S(1-stage) cree XR-E module
    - Input Range: 2.8~4.2V
    - Output Range: 1.2A
    - Battery Type: 1x18650,1x17670
    - Features: Constant output at it's fully input range
    Over discharge protection

    1SM-2(1-stage multi power) Cree XR-E Q5 module (16V max)
    - Input Range: 3~16V
    - Output Range: 1A
    - Battery Type: 1x18650, CR123A's, RCR123's
    - Features: Constant output at 4.5~16V. Recommended use 2xCR123A,3xCR123A or more.

    3SD(3-stage digital) Cree XR-E Q5 module
    - Input Range: 2.8~4.2V
    - Output Range: 1.2A
    - Battery Type: 1x18650, 1x17670
    - Features: Constant output at it's fully input range
    Three stage output,100%-50%-5%
    Over discharge protection
    Memory function
    Change level by push switch

    3SM(3-stage Muti-power digital) Cree XR-E module
    - Input Range: 3~9V
    - Output Range: 1.0A
    - Battery Type: 1x18650, 2xCR123A, 2xRCR123
    - Features: Constant output using CR123's
    Three stage output,100%-50%-5%
    Memory function
    Change level by push switch

    --

    ** OpticsHQ P60 Head and tailcap **

    LED Drop-In and Multi-Function Tailcap Kit
    http://www.opticshq.com/page/Optics/...ID/ACC-DTC-KIT
    $89.99
    Working voltage: 4.2-18.0v
    Maximum output at the emitter approximately 220+ lumens about 2-3 hours
    More than 6 hours at low output
    Fits the following SureFire Lights: G2, G3, 6P, 6PD, 9P, Z2, G2Z, C2, C3, M2

    LED Drop-In and Multi-Function (Reverse) Tailcap Kit
    http://www.opticshq.com/page/Optics/.../ACC-DTC-R-KIT
    $89.99
    Working voltage: 4.2-18.0v
    Maximum output at the emitter approximately 220+ lumens about 2-3 hours
    More than 6 hours at low output
    Fits the following SureFire Lights: G2, G3, 6P, 6PD, 9P, Z2, G2Z, C2, C3, M2
    --

    * G & P *
    G&P Q5 230 Lumens CREE LED Flashlight Torch Lamp GP751
    $41.99 Input: 4.5v - 9v

    G&P Q5 LONG FOCUS 230Lm CREE LED Flashlight Lamp GP751L
    $41.99 Input: 4.5v - 9v

    (Ebay links are dead at the time of update.)
    --

    * Solarforce *
    http://www.solarforce.hk/PRD/main.jsp

    LC-1 (LED module)
    Features:
    Module consists of a Cree LED and an aluminum reflector (light orange-peel-textured reflective coating)
    Single, or 5 modes (3 Levels+Flashing+SOS-signaling)
    Compatible with the Solarforce L2 and Surefire’s P-series flashlights
    - Models available:
    I. LC-1 (R2 or Q5, single mode, 3V - 18V)
    II. LC-1 (R2 or Q5, 5 modes, 4.2V - 8.4V)
    III. LC-1 (R2 or Q5, 5 modes, 3.7V only)

    LC-IR (Infra-red LED module)
    Features:
    Module consists of a IR LED and an aluminum reflector (mirror-like reflective coating)
    Compatible with the Solarforce L2 and Surefire’s P-series flashlights

    LC-UV (Ultra-violet LED module)
    Features:
    Module consists of an UV LED and an aluminum reflector (mirror-like reflective coating)
    Input voltage: 3 - 4.2V
    Compatible with the Solarforce L2 and Surefire’s P-series flashlights

    At the time of this update Lighthound has these in stock:

    Solarforce LC-1 Drop-In with Cree R2 LED - Single Mode
    http://www.lighthound.com/Solarforce...de_p_1633.html
    $19.99 - Cree LED and an aluminum reflector (light orange-peel-textured reflective coating)
    Single Level Constant Output, Input voltage: 3V-12.6V
    Compatible with the Solarforce L2 and Surefire’s P-series flashlights

    Solarforce LC-5 Drop-In with Cree R2 LED - Five Modes with Memory
    http://www.lighthound.com/Solarforce...ry_p_1634.html
    $24.99 - Cree LED and an aluminum reflector (light orange-peel-textured reflective coating)
    3 Levels+Flashing+SOS-signaling, Input voltage: 3V-8.4V



    -=Surefire P60L LED Reflector Assembly=-
    Max 80 lumens, Runtime up to 12 hours depending on flashlight model.
    (stores listed in no particular order)
    $49.00 - http://www.lapolicegear.com/sup6ledreas.html
    $49.00 - http://supremeco.com.hk/catalog/prod...oducts_id=4755
    $49.00 - http://www.surefire.com/maxexp/main/...L-LED-Assembly

    ** Assorted forum posts that you might find useful**
    DealExtreme 1343, 1447, and Wolf-Eyes 130 Lumen Cree Module P60 Cree drop-in modules Runtimes!
    REVIEW - CREE DROP IN from EBAY***VERY NICE***
    Wolf Eyes cree drop-in
    The post that started it Dealextreme drop in for G2, 6P, etc???


    And many posts I probably missed.

    Thanks everyone!
    Last edited by DM51; 09-21-2010 at 02:37 AM. Reason: Updated the list.

  2. #2

    Help Whats the Brightest P60 LED drop in Module?

    Hi everyone, I have a Malkoff M60 drop in for my Surefire 6P (Bored for a AW 18650).
    Is this still the brightest P60 LED module you can buy or is there something new thats brighter using a R2 Bin?
    Last edited by jzelek; 12-27-2008 at 06:45 AM.
    Novatac 120T; Surefire ED2L; 6PD (3SD R2 WC); G3L; 9P (1SM-2 R2 WH), Jetbeam IIIM R2 and Derelight DBS V3 (3SM MC-E).

  3. #3
    *Flashaholic* kramer5150's Avatar
    Join Date
    Sep 2005
    Location
    Palo Alto, CA
    Posts
    6,328

    Default Re: Whats the Brightest P60 LED drop in Module?

    nope the M60 is the brightest... however if you can get him to make you an SSC-P7 direct drive that will blow it away. I had the recent opportunity to play around with one of these in an 18650-drilled 6P and it was VERY bright, almost a pure flood. Like carrying a 100 watt lightbulb
    CLICK HERE for my flashlight reviews.
    PAUL KIM... AN INDUSTRY GENIUS

  4. #4
    Flashaholic
    Join Date
    Feb 2007
    Location
    USA
    Posts
    231

    Default Re: Whats the Brightest P60 LED drop in Module?

    +1 for the Malkoff M60.

    I have found Malkoff's M60 to be excellent. There may be brighter drop-in modules out now, but you would need sophisticated equipment to actually see any difference. By the way, the current M60 (optic) has excellent throw.

  5. #5
    *Flashaholic* Gunner12's Avatar
    Join Date
    Dec 2006
    Location
    MA
    Posts
    10,044

    Default Re: Whats the Brightest P60 LED drop in Module?

    If you want output, see if you can get someone to make you a Seoul P7 or Cree MC-E drop-in. Think 4 P4s or XR-Es in one package. Each one will probably receive less current then a single P4 or XR-E but you get more output overall, and a wider, floodier beam.

  6. #6

    Default Re: Whats the Brightest P60 LED drop in Module?

    Quote Originally Posted by AMRaider View Post
    +1 for the Malkoff M60.
    Here's a big +2!

    By the way, the current M60 (optic) has excellent throw.
    Yes, it does! I am blown away by the M60. I kind of wonder why I stuck with the P60L for so long.
    ΜΟΛΩΝ ΛΑΒΕ

    X300 | G3L | 6PD (M60) | Z2L (M60W) | E1B | MD2 (M61) | XP-G Wildcat

  7. #7
    Flashaholic
    Join Date
    Dec 2006
    Location
    Australia
    Posts
    392

    Default Re: Whats the Brightest P60 LED drop in Module?

    A Dereelight 1S drop in drives the Q5 (or R2 if they are still in stock) at 1.2A on a single 18650/17670 battery. I found my dereelight to be brighter than my M60. (overall output and throw judged by my naked eye)

    Also I believe that the malkoff M30 with a 17670 in your 6P would be slightly brighter than the M60.

    Essentially it all comes down to what emitter is used and how hard it is being driven. Assuming all use a Q5, the Dereelight will be brightest, M30 next, M60 after that.

    The other thing is "brightness" to some means overall output and to others they want a really bright hot spot and max throw. A Dereelight drop in with smooth reflector has a much brighter hot spot and further throw than a M60. It has less spill and more ringy beam too.

    Like the other guys mentioned a P7 or MCE dropin will kill all the above for overall output but not throw.

  8. #8

    Default Re: Whats the Brightest P60 LED drop in Module?

    I just purchased a Dereelight 3SD Cree XR-E WC R2 (SMO & OP) driven at 1.2 amps (18650) from FlashCrazy.

    I'll let you know how it compares to the Malkoff M60 (RCR 123s).

    I really wanted a M30 (18650) but I haven't seen it in stock for a couple of months now.
    Novatac 120T; Surefire ED2L; 6PD (3SD R2 WC); G3L; 9P (1SM-2 R2 WH), Jetbeam IIIM R2 and Derelight DBS V3 (3SM MC-E).

  9. #9
    Flashaholic
    Join Date
    Oct 2006
    Location
    South West Michigan
    Posts
    138

    Default Re: P60 sized led drop-ins (part 3)

    Wow, part 3 already.
    Anyway the list has been updated, prices fixed some links updated etc. Enjoy.

    And as always if you spot an error or something missing let me know and I'll get it fixed.

  10. #10

    Default Re: P60 sized led drop-ins (part 3)

    Thanks CampingLED. I removed the outer spring and it fit like charm. Anybody else notice that the DX17593 acts funny when the batteries are low?

  11. #11
    Flashaholic* bigchelis's Avatar
    Join Date
    Oct 2008
    Location
    Morgan Hill, CA
    Posts
    3,392

    Default Re: P60 sized led drop-ins (part 3)

    Please Add the Malkoff P7 drop-in. He makes a few now upon request, but next year I don't see how it wouldn't be added to his website as one of his many options.
    Surefire 6P with Malkoff M60 simple, bright, efficient.

  12. #12

    Default Re: P60 sized led drop-ins (part 3)

    I just ordered a Malkoff M60, Still trying to find a host light for it. Hmm. Maybe a 6P?

    Can anybody post up some pics of the 6P M60 setups?

    Any pointers, tips, tricks? I just ordered the bulb, how long does there shipping normally take?

  13. #13
    Flashaholic
    Join Date
    Jan 2008
    Location
    United Kingdom
    Posts
    225

    Default Re: P60 sized led drop-ins (part 3)

    i would suggest looking at the solarforce L2 as a P60 host i have found there build quality very good at a reasonable price

  14. #14
    *Flashaholic* kramer5150's Avatar
    Join Date
    Sep 2005
    Location
    Palo Alto, CA
    Posts
    6,328

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by MSRC93 View Post
    I just ordered a Malkoff M60, Still trying to find a host light for it. Hmm. Maybe a 6P?

    Can anybody post up some pics of the 6P M60 setups?

    Any pointers, tips, tricks? I just ordered the bulb, how long does there shipping normally take?
    There is a P60 host thread floating around if you search for it, its not a sticky but it never really seems to die out completely. It would be off topic to recommend hosts in this thread... so I'll refrain.
    CLICK HERE for my flashlight reviews.
    PAUL KIM... AN INDUSTRY GENIUS

  15. #15
    *Flashaholic* kramer5150's Avatar
    Join Date
    Sep 2005
    Location
    Palo Alto, CA
    Posts
    6,328

    Default Re: P60 sized led drop-ins (part 3)

    DX:17593 is not a 3- mode module. Its a single mode, 0-100% ramping mode only. The DX description is incorrect.
    http://www.youtube.com/watch?v=-Oa0KfMjwRk
    Last edited by kramer5150; 12-31-2008 at 11:46 AM.
    CLICK HERE for my flashlight reviews.
    PAUL KIM... AN INDUSTRY GENIUS

  16. #16

    Default Re: P60 sized led drop-ins (part 3)

    I received the DX Trustfire TR-C2 MCE P60 today. It pulls 1.8A from a 18650. It has good output but no where near a P7 Aurora, it also has the crumby cree rings. The tint is very indcandescent like. The hot spot isn't as strong as the UF501B R2, it is sort of a floody light with poor beam quality. The host is of nice quality. It has memory High-Low-Strobe. Not bad for under $35.

  17. #17
    Flashaholic Winx's Avatar
    Join Date
    Mar 2008
    Location
    Tampere, Finland
    Posts
    163

    Default Dereelight 3SD Q5 burned (almost)

    My 3SD burned last night when I was jogging with my girlfriend. It had brownish center even when it was new but yesterday it got really brown. I guessed right when I looked at the emitter: brown spot...

    I don't think it was because of overheating. It was -9°C outside and 6P's body has always been warm after some use. The module is 9 months old so it doesn't have warranty. I already ordered WF-501B camo with R2 WC from DX and replace emitter from it. Cheapest option was Q5 WC with 14mm base from Shiningbeam or Solarforce R2 drop-in, but maybe I'll find some use for UF camo body .

    Picture number 4 is underexposed to show how the beam looks in a real life.







    Last edited by Winx; 01-04-2009 at 07:37 AM. Reason: Info for picture number 4

  18. #18
    *Flashaholic* kramer5150's Avatar
    Join Date
    Sep 2005
    Location
    Palo Alto, CA
    Posts
    6,328

    Default Re: P60 sized led drop-ins (part 3)

    I just did a similar transfusion last night. Pulling the R2-WC from my DX:14442 and transplanting it into a Husky XR-E spotlight. This one is the most pale-white of all my R2 emitters, and because of that it makes it appear brighter. RIP 14442

    I couldn't get the emitter board out of the brass pill though. Not sure what DX uses for thermal adhesive but its solid. I just removed the DC board from the 14442, scraped off the residual solder, and placed the entire brass pill on the stove. The solder melted before the thermal adhesive degraded. So I just pulled the emitter straight from that.

    Last edited by kramer5150; 01-04-2009 at 10:13 AM.
    CLICK HERE for my flashlight reviews.
    PAUL KIM... AN INDUSTRY GENIUS

  19. #19
    Flashaholic Pöbel's Avatar
    Join Date
    Mar 2007
    Location
    Germany
    Posts
    287

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by glenda17 View Post
    I received the DX Trustfire TR-C2 MCE P60 today. It pulls 1.8A from a 18650. It has good output but no where near a P7 Aurora, it also has the crumby cree rings. The tint is very indcandescent like. The hot spot isn't as strong as the UF501B R2, it is sort of a floody light with poor beam quality. The host is of nice quality. It has memory High-Low-Strobe. Not bad for under $35.
    i wouldn't recommend on buying that. The host is nice quality but has virtually no heatsinking. MC-E at 1,4A gets rather hot for an P60 host WITH good heatsinking.

    The dropin itself isn't great either. The pill has really thin walls, the driver seems to be direct drive with pwm for the 2 levels.

    It's better to build your own pill. Use kai's 2 mode driver with 3 7135 chips and add a 4th. this will give 1,4A.

  20. #20

    Default Re: Whats the Brightest P60 LED drop in Module?

    Quote Originally Posted by jzelek View Post
    Hi everyone, I have a Malkoff M60 drop in for my Surefire 6P (Bored for a AW 18650).
    Is this still the brightest P60 LED module you can buy or is there something new thats brighter using a R2 Bin?
    The M60 is not designed to run on 1 cell (3.7 volts), you should be using the M30 with an 18650. Running the M60 on 1 cell puts it in direct drive mode and you are only getting ~160 lumens instead of the rated ~235. Call up Gene and see if you can send it back and get the M30, or start using 2 cells (7.4 volts).

    From their site:

    M60
    "The input voltage is 3.8 - 9 volts. Below 3.8 volts it will drop out of regulation and run direct drive."


    M30
    "It was designed specifically to fit SureFire 3P, 6P, 6Z, C2, M2 and G2 flashlights WITH A SINGLE LITHIUM RECHARGEABLE CELL."

    "The input voltage is 1-5.5 volts."

  21. #21

    Default Re: P60 sized led drop-ins (part 3)

    Is there a new R2 module that can run on both 2x18650 and also 4x123?

    Meaning between 7.4V and 12V.

  22. #22
    Flashaholic* kosPap's Avatar
    Join Date
    Mar 2007
    Location
    Naoussa Greece
    Posts
    2,593

    Default Re: P60 sized led drop-ins (part 3)

    Check at the begining of the thread. there are several on the list...

    FIZZ you need to include the solarforce ones http://www.solarforce.hk/PRD/main.jsp

  23. #23
    Flashaholic
    Join Date
    Oct 2006
    Location
    South West Michigan
    Posts
    138

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by kosPap View Post
    Check at the begining of the thread. there are several on the list...

    FIZZ you need to include the solarforce ones http://www.solarforce.hk/PRD/main.jsp
    Thanks! Got them on the list. Also got Lumens Factory's new 3.7v warm tint added that I over looked some how on the last update. Wow that's getting to be a big list.

  24. #24
    Unenlightened
    Join Date
    Feb 2008
    Posts
    1

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by glenda17 View Post
    I received the DX Trustfire TR-C2 MCE P60 today. It pulls 1.8A from a 18650. It has good output but no where near a P7 Aurora, it also has the crumby cree rings. The tint is very indcandescent like. The hot spot isn't as strong as the UF501B R2, it is sort of a floody light with poor beam quality. The host is of nice quality. It has memory High-Low-Strobe. Not bad for under $35.
    I own this ligth too and I agree with you. This light has less outpout than 1*18650 Aurora 8 mode ssc P7, but is at least 25% smaller and has better runtime.

    Maybe some expert on this forum could answer me, does the
    dx Q5 drop in at 16.90 USD worth the price in front of the MCE P60 drop in ? Could I hope for a brighter outpout ?

  25. #25
    Flashaholic Pöbel's Avatar
    Join Date
    Mar 2007
    Location
    Germany
    Posts
    287

    Default Re: P60 sized led drop-ins (part 3)

    The MCE Drop-In in that light is crap. Heatsinking does not excist, terrible whining and pwm flicker.

    I would only recommend a more powerful P60 Dropin if you have sufficient heatsinking - which means solutions requireing the outer spring for the module will not work for very long.

    @grosoiseau

    if you want flood, what you need is a MCE dropin. If you want throw, go for the q5 dropin.

  26. #26
    *Flashaholic* kramer5150's Avatar
    Join Date
    Sep 2005
    Location
    Palo Alto, CA
    Posts
    6,328

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by Pöbel View Post
    The MCE Drop-In in that light is crap. Heatsinking does not excist, terrible whining and pwm flicker.

    I would only recommend a more powerful P60 Dropin if you have sufficient heatsinking - which means solutions requireing the outer spring for the module will not work for very long.

    @grosoiseau

    if you want flood, what you need is a MCE dropin. If you want throw, go for the q5 dropin.
    FWIW, the malkoff P7 direct drive module gets HOT too. Thats just the nature of the beast, unfortunately.

    I think the operators of these modules need to take caution and not leave the light on and unattended for long periods.

    if you are using a 6P as host, You guys might want to try foil wrapping the module so it makes tight contact with the body. I find it makes a difference with all my modules.
    CLICK HERE for my flashlight reviews.
    PAUL KIM... AN INDUSTRY GENIUS

  27. #27
    Flashaholic Pöbel's Avatar
    Join Date
    Mar 2007
    Location
    Germany
    Posts
    287

    Default Re: P60 sized led drop-ins (part 3)

    It depends. If the heatsinking is good than super bright will work for short periods. If there is no heatsinking (i.e. with the outer spring installed, which is not the case with malcoff) than you will get within minutes

  28. #28

    Default DX sku 12501 on Romisen M4

    Hi all,

    I've the DX sku 12501 (http://www.dealextreme.com/details.dx/sku.12501) which is a Q2 5A. I dropped it in my Romisen M4 and it is very bright, brigther than the stock P4 that came with M4. I am using protected 18650.

    However, it became very hot after a few minutes, much hotter than the P4 and much hotter than all my other lights e.g. Fenix L1D/L2D, Romisen N3, Akoray. If I leave it on for 10 mins, it will be too hot to hold comfortably. Is it safe to use this drop in? Is there any way to improve it? Does using 2xCR123 helps?

  29. #29
    Flashaholic SunnyQueensland's Avatar
    Join Date
    Apr 2007
    Location
    Brisbane, Australia
    Posts
    455

    Default Re: P60 sized led drop-ins (part 3)

    I'm a Surefire nOOb...

    A P60 drop-in will fit a 6P right? And does someone know where I can get a P7 drop-in... (with a really low low)

    Regards

    Not-so-Subliminal Message --->
    You want to sell me your ARC6

  30. #30
    Flashaholic* kosPap's Avatar
    Join Date
    Mar 2007
    Location
    Naoussa Greece
    Posts
    2,593

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by SunnyQueensland View Post
    I'm a Surefire nOOb...

    A P60 drop-in will fit a 6P right? And does someone know where I can get a P7 drop-in... (with a really low low)

    Regards
    that would mean 750mA-1000mA instead of the 2800mA speced?

    Then make it yourself....DX bare module, DX 3256 driver, yor choice of P7...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •