Wuben        
Page 52 of 52 FirstFirst ... 2424546474849505152
Results 1,531 to 1,538 of 1538

Thread: P60 sized led drop-ins (part 3)

  1. #1531
    Flashaholic*
    Join Date
    Oct 2013
    Location
    Russia
    Posts
    735

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by archimedes View Post
    Was not available as a turnkey dropin, but you may want to search for @ahorton aspheric P60 builds ....
    Thank you! Now I vaguely remember that those lenses were sold also as kits...

  2. #1532
    Moderator
    archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, top left
    Posts
    9,092

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by ma tumba View Post
    Thank you! Now I vaguely remember that those lenses were sold also as kits...
    Glad to help and, yes, that's right.
    ... is the archimedes peak

  3. #1533
    KITROBASKIN's Avatar
    Join Date
    Mar 2013
    Location
    New Mexico, USA
    Posts
    2,645

    Default Re: P60 sized led drop-ins (part 3)

    Illumn.com sells the 27.2mm Ahorton spacer and the Ahorton lens in the USA. Look under flashlight parts.

  4. #1534
    Flashaholic*
    Join Date
    Oct 2013
    Location
    Russia
    Posts
    735

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by KITROBASKIN View Post
    Illumn.com sells the 27.2mm Ahorton spacer and the Ahorton lens in the USA. Look under flashlight parts.
    Thank you, that is a great lead!

  5. #1535
    Unenlightened
    Join Date
    Sep 2017
    Posts
    1

    Default Re: P60 sized led drop-ins (part 3)

    I bought a P60 sized led drop in for my old Surefire G2 from Battery Junction a few months ago; it is the single mode 335 lumen model from SZX. It works fine except that the flashlight occasionally needs to be whacked against something to light it up. I figured out the problem is that the bezel assembly leaves the drop in slightly loose when it's screwed down fully. Put in the drop in, screw the front end on - and it rattles when you shake it.

    Troubleshooting the problem last night I figured out that an o-ring between the lens and the drop in would tighten everything up, remove the rattle, and make the light work without the whacks. The ideal o-ring is a number 22 (1-1/8" OD, 1/16" width). Well, my hardware store had the number 21 and the number 23, but not even a bin for the 22. The helpful hardware guy showed me some unnumbered o-rings and I picked one with an 1-1/8" OD and 3/32" width. Works great: no rattle, no whacks, the light works every time.

    I guess I could sand a bit off the bottom of the bezel assembly to get the same result (the light is a yellow Nitrolon model), but I don't like to mess with the original parts unless there's no other way.

  6. #1536

    Default Re: P60 sized led drop-ins (part 3)

    Malkoff all the way! I've got an m60, m61, m61n, m61l, and m61nl. They rock!

  7. #1537

    Default Re: P60 sized led drop-ins (part 3)

    Are there any MG-T2 Drop ins on the market?

  8. #1538
    Flashaholic* DellSuperman's Avatar
    Join Date
    Dec 2012
    Location
    Singapore
    Posts
    1,733

    Default Re: P60 sized led drop-ins (part 3)

    Quote Originally Posted by EricJames View Post
    Are there any MG-T2 Drop ins on the market?
    Vinh made them some time back but the lack of a proper reflector makes it tedious to build.

    Im not sure who else makes them as they are not one of those lumen powerhouse or pencil beam kinda of emitters. But they do have pretty nice tint.

    Found this: http://www.fstoplights.com/ijk-local...s-4000k-5000k/


    A Singapore based online shop...
    Last edited by DellSuperman; 02-13-2018 at 05:09 PM.

Page 52 of 52 FirstFirst ... 2424546474849505152

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •