• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Aleph 1 Titanium Bezels

RPM

Flashlight Enthusiast
Joined
Jan 9, 2005
Messages
1,202
Location
So. Cal
Aleph 1 & McLuxIII-27LT Titanium Bezels


Offered here is a small run of Ti bezels for Aleph 1 heads.
Made from 6AL-4V Titanium and available in three finishes described below.

I also found in the old stash some plain bezels for the original McLuxIII-27LT...

Ordering Info

Payment by PayPal is preferred.... rmcaleve(at)pacbell(dot)net
Shipping with USPS tracking included in price...for usa 50 states
Shipping, Int 1st Class = $16-$23 PM for total



Style 1) TI-1240-410-TC6-075-C
Tapered O.D. Wall, Tall, Crenelated, Extra Chamfers $40.00
sJwTUL6.jpg



Style 2) TI-1240-410-TC6-065
Tapered O.D. Wall, Tall, Crenelated $38.00
R9Bb24P.jpg



Style 3) TI-1240-410-SP
Straight O.D. Wall, Tall, Plain $30.00
sDXd9Rl.jpg











And for the Old Timers some plain bezels for the original "McLuxIII-27LT"

Style 4) TI-1370-410-TP
Tapered O.D. Wall, Tall, Plain $30.00

NI0ZrZr.jpg




Style 5) TI-1370-410-SP
Sraight O.D. Wall, Tall, Plain $30.00

ll7c5Gg.jpg



Finish options:

1) Standard Finish. No Charge, shown above Unless you post otherwise, the finish will be slightly polished.
I use a polishing wheel to remove any sharp edges and it covers the exterior edges quite well.
The inside chamfer will not be polished.

2) Brushed Finish. Add $3, see pic below For a more matte look, I can use ScotchBrite to give the Ti a "grain" or "brushed" look.
This is easy to touch up at home and is closest to the natural machined appearance.

3) Bead Blasted. Add $3 For those who may want it, I can offer bead blasting, for that utility type look.
FYI, once bead blasted, polishing is difficult.

Example of a Brushed "matte" finish.
IL5HFLY.jpg


Thanks for looking!
 
Last edited:

Elakazam

Newly Enlightened
Joined
Aug 15, 2004
Messages
154
Location
Germany
"I´ll take one", please!

Paypal sent for 1x ti-bezel, style 1, and 1x shipping int.

Thanks, Oliver
 

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
The little lovelies arrived today, and are perfect!

As advertised, they fit Aleph 1 heads perfectly.

They also thread right on to ArcMania's Mega Extreme and Mega Micro, leaving just a tiny gap.

Oddly, they also fit the cheap Chinese LightHound 6P clone bezel with the SS bezel ring, but are faintly smaller in diameter than the head. If I can figure out how to get the ring off a real 6P or 6PD, it wouldn't surprise me if they would fit these as well.

Nice work RPM! :twothumbs
 

warx23

Enlightened
Joined
May 16, 2007
Messages
469
Any chance of getting one these with 3 trit slots cut?

rpm. I sent a PM a few days ago

Thanks
 

RPM

Flashlight Enthusiast
Joined
Jan 9, 2005
Messages
1,202
Location
So. Cal
I'll take a number on, with normal finish. Paypal sent

Got your payment.... Thanks!

Our family is going through some grief right now so I may need an extra day or two to get this shipped. :sigh:

I'll do my best to ship it this week. Thanks for your patience...

R-
 
Top