Very specific driver requirements, help please.

gratewhitehuntr

Enlightened
Joined
Aug 29, 2007
Messages
266
Location
Right behind you with a 6D Mag623 !!
OK, so I am building a pile of 2 x 18650 lights with XR-E emitters.

I need a driver with

less than 19mm diameter
height not a problem (less than 12mm I suppose)
3 mode
HI 1.2A -seizure stobe-LO 350ma
supports 8.4v

is there a simple 3 mode like this or who can I talk to about having them made?

I know this may sound like a newb question, but in fact it is exactly the opposite. I know EXACTLY what I want, just not where to get it. :eek:

again, I understand this may be a custom item, please post who I should talk to.

thanks in advance for your replies
 

gratewhitehuntr

Enlightened
Joined
Aug 29, 2007
Messages
266
Location
Right behind you with a 6D Mag623 !!
BTW

I would be ok with

Hi 1A (prefer 1.2-1.4A)

just wanted to allow variance on the HI in case someone didn't post stictly on account of the HI output
anything under 1A is no good

I know what the Cree is rated for but I also know how my aluminum I have to paste it on :grin2:
 
Top