Sold/Expired Both Sold: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

#1) at left, the 3 X MC-E I built using the MZP7-3 sink, detailed here.

- (3) MC-E M WD in series, each with dies wired in parallel
- (3) cut McR27XR (same as used for the P7 build) EDIT: now with cut McR27S
- Shark Buck 3A/Remora
- Regulated LED currents are 0.4, 1.0, and 2.8A on lo, med, hi
- At 11.1V, light draws .35, .89, and 2.4A on lo, med, hi
- Module can run on 11.1V - 25V or 3-6 li-ion cells

**SOLD**$395 installed in your KT4 head plus shipping. Sale includes module only, no head or host included.

The module installed in a light will look like this:
EDIT: Reflectors have been changed, see post #15.


#2 at right in second picture, an MZOX-4, very similar to the light in this post from the M-Zeppelin thread. This one is built with warm white LEDs.

- (1) 6-die Ostar, 4500K
- (1) Fraen Ostar reflector w/ custom trim ring
- (3) Cree XRE Q3 5A
- (2) McR17XR
- (1) McR19XR
- Blue Shark/Remora

**SOLD**$385 installed in your KT4 head plus shipping. Sale includes module only as in first picture, no head or host included.

This is a picture of the module for sale installed in a host:


Prices include installation if desired. You ship me your head, I send it back within 2 days with the module installed along with the removed parts. Payment is made when I have the head finished, packaged and return shipping calculated.

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

3 levels on a triple-MC-E M6 is a very interesting prospect, indeed. Geeze Dennis, if you could turn these out on an assembly line, there's no telling how many governments you could get contracts with. In the Marines I can't tell you the number of M6's and 123's we went through. It's the standard light while riding on LAV's.

These are some serious M6 mods folks. Don't think about it, just grab these to accompany your incan M6 solutions! I got tired of waiting on Litho to ship my WA's so I had to grab one of the 5 Cree's from LED Zeppelin.

You simply CANNOT get this kind of attention to detail from products run through an assembly line. His satisfied customers include many of the most respected cats on this board. That's enough to have me sold!

Good luck in this sale and free bump!

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

jslappa said:

3 levels on a triple-MC-E M6 is a very interesting prospect, indeed. Geeze Dennis, if you could turn these out on an assembly line, there's no telling how many governments you could get contracts with. In the Marines I can't tell you the number of M6's and 123's we went through. It's the standard light while riding on LAV's.

These are some serious M6 mods folks. Don't think about it, just grab these to accompany your incan M6 solutions! I got tired of waiting on Litho to ship my WA's so I had to grab one of the 5 Cree's from LED Zeppelin.

You simply CANNOT get this kind of attention to detail from products run through an assembly line. His satisfied customers include many of the most respected cats on this board. That's enough to have me sold!

Good luck in this sale and free bump!

Click to expand...

++1

Dave

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

Beamshots of the Warm White MZOX? :naughty:

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

Edwood said:

Beamshots of the Warm White MZOX? :naughty:

Click to expand...

If Dennis doesn't do it before mine ships tomorrow, I'll get some beam shots of a 5x Q5 WG module running from the stock MB20, 3x17670, and soon the 3x18650 Megalennium:huh:

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar

Beamshots taken at ISO200, F3.5, 1.6 sec, white balance sunshine. Lights were aimed at upside down red canoe. All MZ lights are running 6 X RCR123 in the FM holder, 22.2V.

First up is the MZMC-3 module for sale.


Next a reference MZP7-3, DSWOJ, Shark Buck 3A.


Third is the warm MZOX-4 module for sale.


Last is a reference stock M6 with MN21 running 6 X CR123, 9.2V.

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

I'm drooling over the 3xMC-E module. Thank God I don't have a KT4 or an M6 (only a KT2). This would be too much temptation

edit: I retract my previous statement. After going back and forth over the pictures, the osram with 3 xr-e's is the winner for me. Oh man, I may need to start looking for a KT4

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

Zep,

These are gorgeous!!! Very nice builds. I wish I had an M6 to gut right about now!

Joseph

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

Dennis the beam on the warm MZOX-4 is amazing. Much diffrent from the standard MZOX-4

I cant say enough about the lights that Dennis builds :thumbsup: I love my MZOX-4



Excellent job!

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

I sure would love to see the beam shots of the MZMC-3 using a warm white 5a MC-E leds compared with the warm MZOX-4. :devil:

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

Great way to improve your M6

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

Zep's a freakin' genius. Can't go wrong. :twothumbs

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

Get back up there M-Zep builds are some of the finest available and the customer service is second to none

Nice photo gunsmoke

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

I changed the reflectors in the tri-MCE module to modded McR27S (instead of 27XR). They are longer in back and eliminate the gap between the bottom of the reflector and the LED.

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

I can hardly wait until you finish mine Dennis. Come on mister mailman

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added


#2 at right in second picture, an MZOX-4, very similar to the light in this post from the M-Zeppelin thread. This one is built with warm white LEDs.

- (1) 6-die Ostar, 4500K
- (1) Fraen Ostar reflector w/ custom trim ring
- (3) Cree XRE Q3 5A
- (2) McR17XR
- (1) McR19XR
- Blue Shark/Remora

$385 installed in your KT4 head plus shipping. Sale includes module only as in first picture, no head or host included.

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

This modules are friggin' awesome and worth every penny!!!

Re: FS: A couple M-Zep M6 LED modules, tri-MCE and Warm Ostar, beamshots added

#2 is sold, thanks Tom!

Re: FS: A couple M-Zep M6 LED modules, tri-MCE (available) and Warm Ostar (sold)

It looks like #1 is sold?
Frank

Re: FS: A couple M-Zep M6 LED modules, tri-MCE (available) and Warm Ostar (sold)

Frank, thanks for pointing out my mistake.

#2 is sold, #1 available. First post corrected.