The Fenix-Store        
Results 1 to 3 of 3

Thread: Problem with Nitecore Ex10 GDP

  1. #1

    Sigh Problem with Nitecore Ex10 GDP

    I just got this light (used) but it will not turn off completely with the head screwed down. It flickers at very low light level, until I unscrew the head about a half a turn. I have widened the gap of the switch ring, cleaned the contacts tried with different battery brands all to no avail. Anyone have any other suggestions? I really like the light if I could get it working correctly.

  2. #2
    Flashaholic* Tekno_Cowboy's Avatar
    Join Date
    Apr 2008

    Default Re: Problem with Nitecore Ex10 GDP

    Check to see that there is not something blocking the piston from sitting properly in the body, and that the spring is properly seated.
    Due to my current schedule being pretty darn hectic, I will not be accepting new modding projects until things settle down.

  3. #3

    Default Re: Problem with Nitecore Ex10 GDP

    Thanks for the tip, but I have also tried that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts