Last edited by Eric242; 08-13-2009 at 01:29 PM.
Same to you Dave
Yes the SST's are very interesting but still in the shaping stages. I really dont' have a good driver for SST90 with two rechargeables. I have been using mine with a one C and a red AW C cell
Sent a request to you via PM.
Sent paypal for a MC-E single level, D-36 dropin for a lumensfactory head.
Paypal sent for one D36, SST-50, 2.8 amp, one level, 7.2 volt module for a WE M90 flashlight. Total payment sent, $72.80. Thanks, Mark
Beamshot comparsion of my MC-E Mbin module in a Surefire M3 head with Lumens Factory IMR13 D36 (1000 bulb Lumens / ~600 lumens out the front) in a Lumens Factory D36 mini turbo head as well as Lumen Factory R2 3Mode D26 (~290 bulb lumens / ~230 lumens out the front):
I really appreciate it´s bright floody beam and yet being able to throw a little better than the picture really shows.
The lego with the MC-E drop-in is my favourite light now due to the great beam (and of course all the nice looking parts that went into it).
Last edited by Eric242; 08-15-2009 at 06:08 PM.
The module arrived today works great!
I received my D36, SST-50 module for my WE M90 flashlight today. It works perfectly. Thanks for a super product.
NB, what differences are you seeing in a P7 vs MCE neutral version? I just need to know before ordering one.
Ok, then. I'll take a warm tinted neutral "Fred" P7 3 level D36. PM sent.
I recieved my P7 D36 drop in today, I immediately installed it into my anxiously waiting, already dissasembled M3 head and fired it up. All i can say is wow!! Excellent beam, extremley bright, and workmanship second to none. Well done sir, and i cant wait to try it out at work tonight. Thanks again for answering all my questions, and a great product,
I added some pictures in the #2post at the bottom of some SF M3 Clones, they will make it easy to switch from your incandescent to an led since you will just switch heads instead of boiling your SF head and risk scratching it.
I will install any module bought here in the new head and ship it to you with no risk to your original M3 that you paid for.
Any bezel ring you have for an M3 will fit perfect.
There are limited number of these at this time.
As i stated in my PM i would like to have a
SSC P7 D36 drop-in for my Surefire M3 with 3 brightness levels...
Is that possible?
Please PM me with total cost, shipping international...
for one SSC P7 3 level drop-in
78$ + 3,20$ = 81,20$
I'd like to take the following 3 if they are still available:
(1) D36 : P7, 3 levels, no flashes, 5V - 14V, cool tint, installed in Chinese M3 clone.
(2) D36 : MC-E, 1 level, 7.2V - 18V, cool tint, installed in Chinese M3 clone.
(3) D26 : P7, 1 level, 3.6V - 6V, cool tint.
$75 + $50 + $75 + $50 + $65 + $ priority shipping to Canada. Cash PP to follow once total is confirmed.
Pls PM for total if okay. Thanks a lot.
you´re up late - or is it early?
I´m in for my third nailbender Drop-in (my second D36). This will go into a Lumens Factory D36 Mini Tubo head and will be powered by 2 rechargeables. I´m very pleased with the D36 cool white MC-E drop-in you made and would like the new one to be a cool white LED as well.
I assume the SST-50/-90 LEDs are not available anymore with your builds right now? Will you get anymore of these in the near future? If not I´ll have to deceide between the MC-E - cool white - MOP reflector 1 level modules 7.2 - 18volts and the P7 - cool white - 3 level no flashes 5v - 8.4V. Is one of these two configurations going to be brighter than the other?
Thanks in advance
I was just thinking as bright as it gets with 2 rechargeables and a cool white tint, if that´s possible with the drivers. If the runtime is not more than 30 minutes I´m ok with that (well, the longer the better but 30 minutes would still be ok with me).
Too bad. I guess that´s not going to change in the next few weeks?
Anyway, in that case I´ll take
P7 - I now have a few drivers while they last to accommodate P7 leds 3 level no flashes 5v - 8.4V $75 shipped Conus
MC-E - MOP reflector 1 level modules 7.2 - 18volts
available in Cool White Mbin WG tint. $75 shipped Conus
Which one if these two can you make brighter with a cool white tint?
All right Dave, I´m going with the MC-E drop-in again PM sent regarding shipping to germany.
Edit: for a MC-E Mbin drop-in
Last edited by Eric242; 09-07-2009 at 12:04 PM.
I just received the MC-E version, this thing is amazing! excellent work!!