Show Us Your EDC Folder

[kaichu dento]

I agree with the bolded part 100% Pete. IIRC, Rick sells them for under $400 or so, while you seldom find one for less than $600 in the real world, at least in the bit of searching I have done. That is a bit frustrating, but it is basically the same with any limited production, high demand item. People sell them for what they can get for them, which is often a lot more than the MSRP. If I can stop buying flashlights someday, maybe I can afford a XM-18.

Great pics too, man. I still think fondly of that Ti Clicky, what a sweet light.

At the time I took those pictures I doubted that I'd be selling either item, but now they're both gone and I'm definitely going to have to replace them again at some point.

[computernut]

Spyderco Delica4 & Surefire E1B

[mossyoak]

^ nice set up man, the delica 4 is a great knife.

[PlayboyJoeShmoe]

I always carry either SRM 710 or 763 clipped.

But my variable rfp knife for the time being is this Camillus EO Jack:

[cummins4x4]

Ti Sage and SWM V10R



Kiwi VG10 and iTP

Lots of great blades on here guys

[PlayboyJoeShmoe]

This old Eagle 4" Jack is dragging down my shorts this morning.

[Johnbeck180]

Hen and Rooster Damascus EDC http://img.tapatalk.com/d06705a5-e96f-4220.jpg

These are not folders but here are two that I recently finished forging. I'm torn on what kind of material/handles to give them.
http://img.tapatalk.com/d06705a5-e9fd-1f3f.jpg


Your images are too large and have been replaced with links Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm

[chaoss]

This, all day/every day.
IMO. the finest production folder ever made.

[Monocrom]

This, all day/every day.
IMO. the finest production folder ever made.

Production? I wish those custom-made Sebenzas were so easily available.

[chaoss]

Production? I wish those custom-made Sebenzas were so easily available.

Limited production perhaps but production all the way, not custom.
I too wish CRK still produced these.

[nbp]

ZT 0551

[kaichu dento]

Nick, how does that ZT feel compared to an XM-18? Good alternative?

[nbp]

Nick, how does that ZT feel compared to an XM-18? Good alternative?

If I had an XM-18 with which to compare it, I wouldn't have bought this one to begin with.



Unfortunately I have only ever seen the XM on the interwebs, so I can't really compare fairly. I quite like the ZT though! Lots of blade but carries smaller, comfortable in the hand, solid lockup, no blade play. And 66% less expensive.

[scaramanga]

here are mine. I kinda like Emersons but will be adding more ZTs as the weeks go by.

[kaichu dento]

ZT 0551



If I had an XM-18 with which to compare it, I wouldn't have bought this one to begin with.

Unfortunately I have only ever seen the XM on the interwebs, so I can't really compare fairly. I quite like the ZT though! Lots of blade but carries smaller, comfortable in the hand, solid lockup, no blade play. And 66% less expensive.

I think I'm going to have to get one of these sometime soon.

After you've had some field time with it you can update your outdoors thread!

[arek98]

or

[~Deicide~]

[Rheinleder]

Crusader Forge

My new one

Picture from today



In the sun

[yosemite]

Here's my EDC...I have had the much abused Gerber with me since the early 90's clipped to my right pocket,the micra in my left,the stilleto joined the micra some years later and at least one vintage fountain pen is on me every day but the particular one changes nearly daily.
[IMG] Uploaded with ImageShack.us[/IMG]

[PlayboyJoeShmoe]

This very nice Camillus Easy Open Jack is my main EDC.

[PlayboyJoeShmoe]

Have this Imperial in my shorts pocket right now. MAY carry it tomorrow in my jeans....

[ev13wt]

That is very beautiful, what is it? I want one!

[Karasu]

DSCF0215 by KarasuStatus, on Flickr
the trio for the day

[Evosil98]

Everyone has some nice EDC folders. I just have a Leek but it has been a perfect pocket carry for me. Great value for a good pocket knife.

[Landshark99]

I rotate between these but the first gets the most use because of how light it is
Benchmade Pardue


Spyderco Calypso
http://i148.photobucket.com/albums/s...PECalyopsm.jpg
Benchmade Dejavoo




http://i148.photobucket.com/albums/s...ejavooopsm.jpg
Chris Reeve Sebenza
http://i148.photobucket.com/albums/s...benzasopsm.jpg


Your images are too large and have been replaced with links Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm

[mvyrmnd]

My EDC Folder - Kershaw Junkyard Dog II.

And why I love it

http://db.tt/JW4QBu8E

[kaichu dento]

Benchmade Dejavoo
http://i148.photobucket.com/albums/s...ejavooopsm.jpg

Always wanted to try one of these out and it looks like a great combination of versatile blade shape and practical grip.

[hemdale]

Amazing ! What knife is that ?

[damanupnorth]

SandShark & Halo,
for when that stupid Amazon box must be opened fast - LOL

http://i1101.photobucket.com/albums/...th/Damans2.jpg


Your image is too large and has been replaced with a link. Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm

[THE_dAY]

Amazing ! What knife is that ?

That is the Lochsa Folder by Scott Cook Knives.