• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired SALE: HAIII M@g5761,PWM regulation,w/Batteries + Price Drop

JimmyM

Flashlight Enthusiast
Joined
Aug 30, 2006
Messages
2,853
Location
Boston, MA, USA
This is a COMPLETE 2D Black HAIII M@g with the Philips 5761 bulb including a JM-PhD-D1 3 level regulator. The 3 levels are ~5.5V, ~6.2V and 7.15V. It has Low voltage protection programmed to pulse the light when voltage drops to 6V. Once the voltage drops to 94% of 6V (5.64V, 2.82V/cell) it shuts down.

dscf0011l.jpg


What you get...
2D M@g HAIII Black anodized with a finned and fluted head. Details HERE
Borofloat lens
M2 reflector (HOP by the looks of it)
Alumina Ceramic fiber insulation
KIU socket
JM-PhD-D1 regulator with a multi-level interface. Details HERE.
2 x KD Li-Ion D cells (Un protected)

I will reprogram the light to what ever settings the purchaser desires. See the JM-PhD-D1 link above for programming options.

The bottom line...
I'm asking $275. Now $250
Shipping Via USPS Priority Mail Flat Rate = $10 to CONUS
International shipping might be difficult due to the Lithium Batteries that are included.

The first :takeit: gets it.
PP Info: [email protected]
 
Last edited:

^^Nova^^

Enlightened
Joined
Aug 4, 2008
Messages
388
Location
Australia
Re: SALE: HAIII M@g5761,PWM regulation,w/Batteries

Those hosts are just the best, love the finning/fluting of the head.

Good luck with the sale Jimmy.

Cheers,
Nova
 

43315

Newly Enlightened
Joined
May 13, 2009
Messages
9
What kind of power out the front is this beauty putting out? Or what can be put in it, I'm looking for something along the mag623 area. Thanks DAVID
 

JimmyM

Flashlight Enthusiast
Joined
Aug 30, 2006
Messages
2,853
Location
Boston, MA, USA
What kind of power out the front is this beauty putting out? Or what can be put in it, I'm looking for something along the mag623 area. Thanks DAVID
The 5761 on 7.15V is ~1200 bulb lumens
The 64623 on 14.4V is ~4600 bulb lumens. Both of those lumen figures come from Lux's destructive testing thread.
You can fit a 12 x 2/3A pack into it to drive the 64623. The regulator will just have to be reset to the proper voltage.
 
Last edited:

NetKidz

Enlightened
Joined
Jun 21, 2006
Messages
569
Location
Taiwan
:takeit: as discussed in the PM. The setting is fine for me, there's no need to change.

Thanks again.
 
Top