ArmyTek
Page 1 of 4 1234 LastLast
Results 1 to 30 of 92

Thread: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

  1. #1

    Default FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    I have 33 pieces of these Titanium 6al4v Bezels for the SF 6P, C2-3, G2 etc. I don't know if they will work with any of the SF "clones"

    They will also fit the Jetbeam ProIII.

    They are approx. .170 thick, not including the threads. Just the right size.

    $25.50 each
    *no extra fees

    $3 shipping first class usa or international. should cover 4-5 pieces
    Claim yours here in this thread please.

    send pp to sales(at)uniquetitanium.com with a note what payment is for.

    for MO, pm me for info.

    Last edited by russtang; 08-26-2009 at 09:38 PM.

  2. #2

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    ...I already ordered the SS bezels from Mike and now you post this!



    No removal tool??? ..those stock SF rings can make a preacher cuss!!
    Si vis pacem, para bellum.

  3. #3
    Flashaholic* Nitroz's Avatar
    Join Date
    Jul 2004
    Location
    Monroe
    Posts
    2,793

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Armed_Forces View Post
    ...I already ordered the SS bezels from Mike and now you post this!
    +1

  4. #4

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Armed_Forces View Post
    ...I already ordered the SS bezels from Mike and now you post this!



    No removal tool??? ..those stock SF rings can make a preacher cuss!!

    If you don't have a tool:
    I just hold the head with some needle nose pliers in some almost boiling water for about a minute or two and then use some split-ring pliers to remove the stock bezel-holding the head with a pot-holder.

    I've done that 2-3 times and it worked ok.

    Its OK to have SS And Ti bezels. Just rotate them every few days like a watch band.

  5. #5
    Flashaholic Winx's Avatar
    Join Date
    Mar 2008
    Location
    Tampere, Finland
    Posts
    163

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    for one.

    I have different bezel rings so maybe I need to rotate them all once in a week.

    I wouldn't try to remove the ring without heat. All three I have opened had some kind of glue which softens when heated. Hair dryer was efficient in my case. Cheapest acrylic removal tool is sold by flashlightlens.com.

  6. #6
    Flashaholic*
    Join Date
    Jun 2006
    Location
    Taiwan
    Posts
    569

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    for one.


  7. #7

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Winx View Post
    for one.

    I have different bezel rings so maybe I need to rotate them all once in a week.

    I wouldn't try to remove the ring without heat. All three I have opened had some kind of glue which softens when heated. Hair dryer was efficient in my case. Cheapest acrylic removal tool is sold by flashlightlens.com.
    Quote Originally Posted by NetKidz View Post
    for one.

    I will get these out tomorrow.(Wed) its late errr..early??

  8. #8

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Winx View Post
    for one.

    I have different bezel rings so maybe I need to rotate them all once in a week.

    I wouldn't try to remove the ring without heat. All three I have opened had some kind of glue which softens when heated. Hair dryer was efficient in my case. Cheapest acrylic removal tool is sold by flashlightlens.com.
    Quote Originally Posted by NetKidz View Post
    for one.

    Shipped. Thanks

  9. #9
    Enlightened sixshooter_45's Avatar
    Join Date
    Jul 2006
    Location
    I live in Arnold, Missouri
    Posts
    95

    Buttrock Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Armed_Forces View Post
    ...I already ordered the SS bezels from Mike and now you post this!



    No removal tool??? ..those stock SF rings can make a preacher cuss!!
    I've used a gripping pad wrapped around a 1/2" dia. brass rod and laid it in between the lowest part of the crenelated bezel whilst gripping the head's hex's in my rubber padded vise. With a little downward pressure and a twist, pop, it comes right off!

  10. #10
    Enlightened sixshooter_45's Avatar
    Join Date
    Jul 2006
    Location
    I live in Arnold, Missouri
    Posts
    95

    Buttrock Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    I just ordered two ea.,

    Payment Sent (Unique Transaction ID #89X067925Y2780502)
    Sent to:
    Email:
    sales@uniquetitanium.com

  11. #11

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by sixshooter_45 View Post
    I just ordered two ea.,

    Payment Sent (Unique Transaction ID #89X067925Y2780502)
    Sent to:
    Email:
    sales@uniquetitanium.com

    Shipped. Thanks

  12. #12
    Enlightened sixshooter_45's Avatar
    Join Date
    Jul 2006
    Location
    I live in Arnold, Missouri
    Posts
    95

    Wink2 Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by russtang View Post
    Shipped. Thanks
    Thank you! Can't wait!

  13. #13
    Flashaholic* Barbarian's Avatar
    Join Date
    May 2007
    Location
    STL
    Posts
    839

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    for one bezel


    Thanks,
    Tim
    I'm looking for a Mac's Customs Tri-EDC in either aluminum or titanium. The only must is that it is bored to accept an 18350. Emitter type and clip are not important.

  14. #14
    *Flashaholic*
    Join Date
    Oct 2007
    Location
    Great South Bay, LINY
    Posts
    8,051

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    I'll take 2, please.



    Last edited by donn_; 08-30-2009 at 08:58 AM.

  15. #15

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    for two bezels.

    Thanks!

  16. #16
    Enlightened sixshooter_45's Avatar
    Join Date
    Jul 2006
    Location
    I live in Arnold, Missouri
    Posts
    95

    Wink2 Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Thanks for the fast shipment and for very well made great looking strike bezel, I just ordered four new UCL optical lenses for my SF Z2 flashlights.

    The threads were a little longer to the shoulder than my stock ones, which caused my lenses to crack.

    The lenses I ordered are almost exactly the same amount less in thickness than the extra length of the these vs. mine.

    A little rubbbing with some fine emory cloth on the threads on a flat surface would work if one wishes to keep the stock lens. A digital caliper would help with the measurement required as I'm sure they are differences from one to the next.

    I'm not complaing as I was going to replace the Pyrex lenses anyway. Just a heads up for others.

    An excellent product, thanks again!

  17. #17

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by NewtonGT View Post
    for two bezels.

    Thanks!
    Quote Originally Posted by donn_ View Post
    I'll take 2, please.



    Quote Originally Posted by Barbarian View Post
    for one bezel


    Thanks,
    Tim
    I'll get these out Mon. Thanks

  18. #18

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Barbarian View Post
    for one bezel


    Thanks,
    Tim
    Quote Originally Posted by donn_ View Post
    I'll take 2, please.



    Quote Originally Posted by NewtonGT View Post
    for two bezels.

    Thanks!

    Shipped. Thanks

  19. #19

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Thanks Russ!!!


  20. #20
    Flashaholic Winx's Avatar
    Join Date
    Mar 2008
    Location
    Tampere, Finland
    Posts
    163

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    I got mine. Very, very nicely machined. Thanks!




  21. #21
    *Flashaholic*
    Join Date
    Oct 2007
    Location
    Great South Bay, LINY
    Posts
    8,051

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Gottem today...beautiful stuff! And thanks for the extra goodies. I haven't had a new P38 since the VietNam era. It's amazing what a difference sharpness makes!

    I must say, this little 6" stainless cable with the screw connection (scroll down) is a dynamite item. At $0.99, it's one of the most useful bargains I've seen in a long time. I'll be adding at least a dozen of these to my next order!


  22. #22
    Flashaholic* Barbarian's Avatar
    Join Date
    May 2007
    Location
    STL
    Posts
    839

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    ^
    Ditto to that statement.

    Thanks Russ.
    I'm looking for a Mac's Customs Tri-EDC in either aluminum or titanium. The only must is that it is bored to accept an 18350. Emitter type and clip are not important.

  23. #23
    Flashaholic
    Join Date
    Nov 2008
    Location
    Norway
    Posts
    135

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Do the titanium bezel fit the JETBeam Titanium Military?.
    http://www.cpfmarketplace.com/mp/sho...=186462&page=1

  24. #24

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by arcel1t View Post
    Do the titanium bezel fit the JETBeam Titanium Military?.
    http://www.cpfmarketplace.com/mp/sho...=186462&page=1
    I'm sorry, but I don't know if it will or not. I don't know if it is the same as the ProIII.
    Maybe someone with both lights can help answer that.
    I will try to find out.

  25. #25

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by Winx View Post
    I got mine. Very, very nicely machined. Thanks!



    Thats a Nice looking Light!

  26. #26

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Have a Nice Holiday Weekend!

  27. #27
    Flashaholic* xcel730's Avatar
    Join Date
    Mar 2008
    Location
    NY
    Posts
    1,727

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Russ,

    I just PPed you for $28.50 for one bezel. I hope you still have some available. Let me know when you get them shipped. Thanks!

  28. #28

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Quote Originally Posted by xcel730 View Post
    Russ,

    I just PPed you for $28.50 for one bezel. I hope you still have some available. Let me know when you get them shipped. Thanks!
    Shipped. Thanks

  29. #29

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII

    Hey Russ, great Job

  30. #30

    Default Re: FS. Titanium Bezels for SF 6P,C2,G etc. Also JetBeam ProIII


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •