Tony Hanna
Newly Enlightened
I've got a little project in the works that I'd like to use a P60 drop-in for (specifically the 3 mode + 0-100% ramping R2 unit that DX sells). The problem is that the depth I have to work with for mounting the drop-in is only a little better than 1/2 the length of the drop-in itself. In order to get it to fit, I'm going to have to cut it back at least enough to completely remove the "belled" area at the top of the reflector. Possibly even as far as the groove on the outside of the reflector (worst case). I'll know more when I have the parts in hand.
Anyhow, I'm wondering if anybody has tried this before and can give me some idea of what this will do to the beam? I'm guessing that a shallower reflector is going to result in a less intense hot spot with brighter spill but that's just a wild guess...
Thanks,
Tony
Anyhow, I'm wondering if anybody has tried this before and can give me some idea of what this will do to the beam? I'm guessing that a shallower reflector is going to result in a less intense hot spot with brighter spill but that's just a wild guess...
Thanks,
Tony