Any D26 hotwire combination?

kosPap · Oct 22, 2009

I am reffering to ready made D26 modules, Not the FM ones...

So I can only think of a 12V for 4xCR123 run on 3xLi-Ions...or is it too much?

I aleady tried 3.7Xenon with 2xCR123 partly depleted...POOF!

leukos · Oct 22, 2009

A Surefire P91 with two 16340 IMR's is a nice little hotwire.

Linger · Oct 22, 2009

search electron guru's intro to incans, lots of details listed including all the various d26 combo's from 3.7, 9.0v....
Totally should be a sticky, its a great read.

Dioni · Oct 22, 2009

kosPap said:
I am reffering to ready made D26 modules, Not the FM ones...

So I can only think of a 12V for 4xCR123 run on 3xLi-Ions...or is it too much?

I aleady tried 3.7Xenon with 2xCR123 partly depleted...POOF!

Normaly "9v" bulbs on 2x li-ions.
12v bulbs on 3x li-ions have high risk of instaflashing, but they are a option. However, none have the output of P91 on li-ion or IMR.

Linger said:
search electron guru's intro to incans, lots of details listed including all the various d26 combo's from 3.7, 9.0v....
Totally should be a sticky, its a great read.

Electron's thread is about bi-pin bulbs using the FM adapter.

Linger · Oct 22, 2009

Dioni said:
Electron's thread is about bi-pin bulbs using the FM adapter.

Oops, you're right. I was thinking of MD's guide. er, one of them. This one:
https://www.candlepowerforums.com/threads/161536
good stuff.

kosPap · Oct 23, 2009

well thanks for the suggestions...

MD threads is saved in the hoem computer and is updated from time to time...

Know about the 2xLi-ions... My C2 is set up with HO-9 and 17500....
guess the best that can be done in a LF IMR bulb and batts

cheers...

Any D26 hotwire combination?

kosPap

Flashlight Enthusiast

leukos

Flashlight Enthusiast

Linger

Flashlight Enthusiast

Dioni

Flashlight Enthusiast

Linger

Flashlight Enthusiast

kosPap

Flashlight Enthusiast

Similar threads

Latest posts