Droid 58 Carabiner and Carabineer Chain sales thread is <<Closed>>

[liyinuo00]

Hi Dave:
I will take a Droid without the chain. email sent.
But can I pp U ($220+$33=$253) next monday? pls?
Thank you.
Cheers
Robin

[liyinuo00]

Hi Dave:
Paypal and email sent for the Droid without the chain.(Transaction ID 1U999497AV063790Y)
Thank you
Robin

[Data]

Hi Dave:
Paypal and email sent for the Droid without the chain.(Transaction ID 1U999497AV063790Y)
Thank you
Robin

It will ship Tuesday. Thanks.

[liyinuo00]

......................................
a pic is more than 1000000000000000000000 words
just got today!!

[kromanm]

Hi Dave:
I will take a Droid without the chain. email sent.
But can I pp $220+$33=$253
Transaction ID 7HX581621J073280D
Thank you.
Cheers ROMAN

[kromanm]

Hi, David.

[Data]

The chains are back in stock.


Cheers
Dave

[ukmidnite]

Are these still in stock or do you plan to do any more droids Dave? I fancy anodising one of these

[Data]

Are these still in stock or do you plan to do any more droids Dave? I fancy anodising one of these

The Droid is in stock and so are the chains if you want the set.

[Nutdip]

The Droid is in stock and so are the chains if you want the set.

Hey there,
Is your paypal set up to take credit cards? If so, please let me know the email account number to which I should pay.

Thanks.

EDIT: I just noticed that all of the ordering info is in the first post. Forget my question. I'll order later this week. :-)

3/12/13
Paypal sent. Thanks Dave.

[Makora7]

Just sent you a mail for 2x Droid58's without chain. Let me know if there are still any left so I can proceed with payment.

[Makora7]

I've sent you a mail for 2 of your Carabiners (without chain). Please let me know if there are any left so I can proceed with payment.

[Nutdip]

Just got my biner and chain Dave. I'm running it with my Sunwayman until my Mac's arrives. Here's a horrible iphone picture:


Love it. Thank you for the quick shipment.

V

[Benchiew]

Looks really good.
But I need to stop looking at them, else my pocket is going to hurt.

[Nutdip]

Anyone know how to change the o rings? I have some jewelers tools and I'm assuming you push the little pin that lives in the lock release out? I don't have a jewelers loop, so I can't tell if it is threaded or not.

I couldn't find anything about it on google.

[Nutdip]

Looks really good.
But I need to stop looking at them, else my pocket is going to hurt.

Do eeeeeeeeet! :-)
But I must forewarn you, the "fiddle factor" is strong with this one:

I can't stop playing with it.

[Data]

Use a very fine needle to push in on the pin (no threads). Do not let it fly or get away. It holds the lock release just like a watch holds a band. In fact it is a watch band retaining clip.


Great pic nutdip!

Cheers
Dave

[Nutdip]

Use a very fine needle to push in on the pin (no threads). Do not let it fly or get away. It holds the lock release just like a watch holds a band. In fact it is a watch band retaining clip.


Great pic nutdip!

Cheers
Dave

Worked like a charm! I'll do a quick recap since I found it difficult to find a how to. I just took a few pics as I went:

(Dave is nice enough to include extra o rings with your carabiner. I got little red ones. If you wish to change them... here is how

A.) Use a dishtowel or something as a catch in case the tiny pin comes out! It could bounce into infinity on a hard surface.

Step one: Take a 0.9 size punch (or smaller) and push in on either side's pin hole in the locking bar while twisting the bar slightly to move it aside. It is a tiny, sprung unit just like a watch band pin. You can see the little 0.9 punch in the picture. I got mine in an Iphone tool kit that I bought. (Tools for changing the back cover, your battery, etc.)

Huge version: http://cornfed.smugmug.com/Family/20...xbT/0/O/d2.jpg

Step two:
Carefully pull off the old o rings using a tiny flat head screwdriver. Once both o rings are off, the little pin can go on it's merry way if you're not careful. Then, while holding the pin in... place the new o rings over all three holding posts and the pin. You'll have to use your little screw driver to pull the o ring aside so that you can slip the pin in. Then, one side at a time, put the locking bar back on by holding down the sprung portion of the pin with your tiny flat head screwdriver and moving the bar hole over the pin.

Huge pic: http://cornfed.smugmug.com/Family/20...gVr/0/O/d1.jpg

Step 3: Gawk at your newly colorful creation. :-)

Huge pic: http://cornfed.smugmug.com/Family/20...8Lk/0/O/d3.jpg

I don't have a fancy camera. Best I could do with my Iphone. Hope you like,

Have a killer weekend.
--------------------------------------------
Search terms: How to change the o rings on a droid 58 carabiner. How do I change the O rings on the droid carabiner?

[Data]

I want to note that the little clip in Nutdip's last picture does not come with my chain.

It is very nice, where do we get them?


Cheers
Dave

[Arm and Leg]

I want to note that the little clip in Nutdip's last picture does not come with my chain.

It is very nice, where do we get them?


Cheers
Dave

IlluminationSupply sells them for $3-$5

[Nutdip]

I want to note that the little clip in Nutdip's last picture does not come with my chain.

It is very nice, where do we get them?


Cheers
Dave

TEC Accessories Python Clip, 28mm

$5.25

https://illuminationsupply.com/keych...l#.UVZWrVf_mSo

[Garbage85]

Are the Driod and chain set still available? if so ill take a set, where do i send the paypal?

[Data]

Are the Driod and chain set still available? if so ill take a set, where do i send the paypal?

Yes, they are in stock. My PayPal is cpfdata@coolfall.com

Cheers
Dave

[Data]

The Droid is out of stock. Please check back at a later time or subscribe to this thread for updates.

Cheers
Dave