SunwayLED
Page 1 of 3 123 LastLast
Results 1 to 30 of 89

Thread: $urefire E2 Mini Turbo Head

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default $urefire E2 Mini Turbo Head

    (C L O S E D)




    PLEASE READ CAREFULLY BEFORE YOU ATTEMPT TO BUY.

    NO RESERVATION

    These MINI TURBO HEADs are another innovation from FiveMega for your favorite $urefire E2 series.
    With adding these TH kits, not only you will have most brightest E2 flashlight in the world but you will get much more throw and beam will be adjustable too.
    With these mini TH you MUST use your own E series Bi-Pin Socket and CL1499 which produces over 385 bulb lumens (LO) or CL1794 for 1000 bulb lumens HO). (No other lamps can be used)
    Simply install 2 IMR 16340 in the body, install mentioned lamp assembly and use TH instead of original head.
    ATTENTION: Do not charge batteries over 4.10 volt
    What you get in this thread is finned turbo head, bezel, reflector, glass lens o'rings and ONE 1499 bulb which called a Kit for $49
    Body, tail cap, bulb socket, batteries and chargers are not included.
    You can also use these THs with your 2x18500 bodies too.
    These Mini Turbo Heads are available in HA Black or Mil spec natural gray only.
    No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
    Please don't pay if you may change your mind. There will not be any refund.
    It is ABSOLUTELY NECESSARY to pick next available color and and valid number, post detail of your order here and same information in paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available color and valid number, post detail of your order here and same information in paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available color and valid number, post detail of your order here and paypal note along with your CPF handle.
    I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
    STOP. Please do not buy if you plan not to follow above easy instruction.
    Example: Ms. Brook for:
    #55 Black $49
    1 Extra 1499 $9
    Shipping to States $4
    ---------------------
    Price: $49 Kit (NOT AVAILABLE)
    Kit without bulb $40 (NOT AVAILABLE)
    Extra 1499 $9 (NOT AVAILABLE)
    Shipping to States: $4
    Internationally: $5
    Paypal:
    DO NOT PAY
    Please PM for other type of payment only.
    ---------------------

    #01 Black kit dcaprilia paid shipped 0309288000011043XXXX
    #02 Black kit senna94 paid shipped 0309288000011110XXXX
    #03 Black kit Jay T paid shipped 0309288000011110XXXX
    #04 Black kit nailbender paid shipped 0309288000011110XXXX
    #05 Black kit Ferry paid shipped LC138288111US
    #06 Black kit mikevelarde paid shipped LC138288142US
    #07 Black kit donn_ paid shipped 2308218000002887XXXX
    #08 Black kit donn_ paid shipped 2308218000002887XXXX + 03080730000166855615
    #09 Black kit rdh226 paid shipped 03080730000166856223
    #10 Black kit rdh226 paid shipped 03080730000166856223
    #11 Black kit rjr104 paid shipped
    #12 Black kit my_gentle_cry paid shipped CP238160170US
    #14 Black kit Roc shipped LC547924885US
    #15 Black kit Roc shipped LC547924885US
    #16 Black kit Roc shipped LC547924885US
    #17 Black kit lctorana paid shipped LC547817657US
    #18 Black kit Iliger paid shipped LC547811212US
    #19 Black kit m@tty paid shipped LC547811155US
    #20 Black kit fabienne paid shipped LC548067495US
    #21 Black kit fabienne paid shipped LC548067495US
    #22 Black kit run4jc paid shipped 03103490000027897120
    #23 Black kit dbleznak paid shipped 03110240000019894736
    #24 Black kit Darien paid shipped 03112550000057989362

    ---------------------
    #01 Black (BLEMISHED $5 OFF) Mike Docherty paid shipped 03103490000199596883
    ---------------------
    #01 Gray kit dcaprilia paid shipped 0309288000011043XXXX
    #02 Gray kit iflyjts paid shipped 0309288000011110XXXX
    #03 Gray kit nailbender paid shipped 0309288000011110XXXX
    #04 Gray kit lctorana paid shipped LC138288125US
    #05 Gray kit RichS paid shipped 0309288000011043XXXX
    #06 Gray kit cernobila paid shipped LC547565012US
    #07 Gray kit OscarTheDog paid shipped 0309033000010309XXXX
    #08 Gray kit iflyjts paid shipped 03080730000166847061
    #09 Gray kit rjr104 paid shipped
    #10 Gray kit scalez paid shipped 23082180000028860916
    #11 Gray kit Nite paid shipped 03092880000117167221
    #12 Gray kit Nite paid shipped 03092880000117167221
    #14 Gray kit dannyk paid shipped LC547780308US
    #15 Gray kit lctorana paid shipped LC547817657US
    #16 Gray kit Hack On Wheels paid shipped LC547810897US
    #17 Gray kit crf paid shipped 03101230000057970042
    #18 Gray kit crf paid shipped 03101230000057970042
    #19 Gray kit m@tty paid shipped LC547811155US
    #20 Gray kit JNORDON paid shipped 03103490000027985520
    #21 Gray kit yellow paid shipped LC548063697US
    #22 Gray kit Darien paid shipped 03112550000196289880
    #23 Gray kit JasonH paid shipped 03112550000057987023
    #24 Gray kit labrat paid shipped LC452889628US

    ---------------------
    Please find link of my other products here and click on each link you are interested on.
    Last edited by fivemega; 02-07-2014 at 01:42 PM.

  2. #2
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by Hack On Wheels View Post
    would stock surefire lamps physically not fit?
    May fit but won't focus.

    Quote Originally Posted by Hack On Wheels View Post
    why do you say this is limited to using a CL1499 bulb, would a Strion or TL-3 bulb not work well?
    Strion and TL-3 bulbs are shorter than 1499 and again won't focus.

    Quote Originally Posted by Hack On Wheels View Post
    I'm assuming the Grey would be similar in finish to your E-series bodies?
    That's correct and pretty close to $urefire gray colors.

    Quote Originally Posted by iflyjts View Post
    QUESTION: What is the run-time on this setup using the CL1499 and the IMR 16340 batteries?
    15 minutes with pair of IMR16340
    And 45 minutes using 2 protected 18500


    Quote Originally Posted by paintballdad View Post
    Will the stock Surefire clicky tailcap switches handle the current draw of these lamps?
    This set up takes under 2 Amps and I don't think $urefire clicky fail.
    It works for me just fine.


    Quote Originally Posted by donn_ View Post
    What's the size of the reflector, and is it removable?
    Reflector diameter is about 25mm with LOP texture and of course removeable.

    Quote Originally Posted by naked2 View Post
    FM 1794 won't focus in this either?
    Will fit and focus perfectly if you have or can obtain one.

    Quote Originally Posted by senna94 View Post
    I received mine today and noticed that there is some assembly required regarding the Carly lamp. The stems are very long and when installed hit the inside glass of the turbo head. Any suggestions as to exactly how long to cut these or is it just trial and error?
    All CL1499 bulbs come with uncut legs or pins. You need to cut and shorten the pins to length of about 4.5mm from buttom of bulb glass.
    Make sure to trim end of bulb pins.


    I was wondering if your E-series Mini Turbo Head can be used with a P60 type drop in?
    No, it can't.

    Quote Originally Posted by naked2 View Post
    Is there an available 3.7V bulb that will focus in this, to use it with a single cell body (E1, FM 1x 16340/1x 18500, etc.)?
    Could be but I never seen this size 3.7 volt bulb.
    Last edited by fivemega; 03-11-2010 at 03:14 PM.

  3. #3
    Flashaholic dcaprilia's Avatar
    Join Date
    Aug 2009
    Location
    Philippines
    Posts
    400

    Default Re: $urefire E2 Mini Turbo Head

    I'll take one black kit and one gray kit.

    Paypal sent for E2 mini turbo head in black No.1 and gray No.1.

    Thanks
    Last edited by dcaprilia; 03-06-2010 at 06:43 PM.
    "Growing old is mandatory, growing up is optional"

  4. #4
    Flashaholic* senna94's Avatar
    Join Date
    Dec 2005
    Location
    Houston, Texas
    Posts
    1,730

    Default Re: $urefire E2 Mini Turbo Head

    I will take #2 black kit with USPS Priority shipping to CONUS with DC.

    E2 Black Mini Turbo Head $49.00 + USPS Priority w/DC $6.00 = $55.00 total

    Payment Sent (Unique Transaction ID #0EF65984V4502661C)

    Thanks FM!!

    Thinking of all the possibilities this could open up. I am wondering if a McGizmo 2 X AA body with 2 X 14500 cells will work.
    Last edited by senna94; 03-06-2010 at 07:58 PM.
    "The Constitution says promote the the general welfare not provide welfare." -Allen West-
    To a democrat freedom means freedom from responsibility.

  5. #5
    Flashaholic*
    Join Date
    Nov 2007
    Location
    Canada
    Posts
    774

    Default Re: $urefire E2 Mini Turbo Head

    Just a couple questions about this... would stock surefire lamps physically not fit? Also, why do you say this is limited to using a CL1499 bulb, would a Strion or TL-3 bulb not work well?

    Very nice looking heads regardless!
    I'm assuming the Grey would be similar in finish to your E-series bodies?


  6. #6
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by Hack On Wheels View Post
    would stock surefire lamps physically not fit?
    May fit but won't focus.

    Quote Originally Posted by Hack On Wheels View Post
    why do you say this is limited to using a CL1499 bulb, would a Strion or TL-3 bulb not work well?
    Strion and TL-3 bulbs are shorter than 1499 and again won't focus.

    Quote Originally Posted by Hack On Wheels View Post
    I'm assuming the Grey would be similar in finish to your E-series bodies?
    That's correct and pretty close to $urefire gray colors.

  7. #7
    Flashaholic iflyjts's Avatar
    Join Date
    Jun 2009
    Location
    USA
    Posts
    149

    Default Re: $urefire E2 Mini Turbo Head

    Nice work FIVEMEGA as always ! ! !

    QUESTION: What is the run-time on this setup using the CL1499 and the IMR 16340 batteries? Thanks in advance...


    iflyjts







  8. #8
    Flashaholic* paintballdad's Avatar
    Join Date
    Sep 2008
    Location
    Kaliporniya
    Posts
    525

    Default Re: $urefire E2 Mini Turbo Head

    Will the stock Surefire clicky tailcap switches handle the current draw of these lamps?

  9. #9
    Flashaholic iflyjts's Avatar
    Join Date
    Jun 2009
    Location
    USA
    Posts
    149

    Default Re: $urefire E2 Mini Turbo Head

    I'll take (1) #2 Gray Kit, and (1) #24 E Series Bi-pin socket, and (2) additional CL1499 bulbs.




    thanks,

    iflyjts
    Last edited by iflyjts; 03-06-2010 at 07:32 PM.

  10. #10
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by iflyjts View Post
    QUESTION: What is the run-time on this setup using the CL1499 and the IMR 16340 batteries?
    15 minutes with pair of IMR16340
    And 45 minutes using 2 protected 18500


    Quote Originally Posted by paintballdad View Post
    Will the stock Surefire clicky tailcap switches handle the current draw of these lamps?
    This set up takes under 2 Amps and I don't think $urefire clicky fail.
    It works for me just fine.

  11. #11
    Flashaholic dcaprilia's Avatar
    Join Date
    Aug 2009
    Location
    Philippines
    Posts
    400

    Default Re: $urefire E2 Mini Turbo Head

    Ill also get

    (2) E Series Bi-pin socket No.25 and 26. - $54 each

    (2) additional CL1499 bulbs- $18

    Total $72
    "Growing old is mandatory, growing up is optional"

  12. #12
    Flashaholic iflyjts's Avatar
    Join Date
    Jun 2009
    Location
    USA
    Posts
    149

    Default Re: $urefire E2 Mini Turbo Head

    Any chance that you have any more Gray E series 2x18500 bodies coming
    back in stock? I'll take one when you do!

    Thanks,

    iflyjts

  13. #13

    Default Re: $urefire E2 Mini Turbo Head

    For Black kit #3 and 2 spare 1499s.

  14. #14
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    any chance you'll sell me a couple of 1499 bulbs? please let me know either way, thank you.
    Sorry,
    I don't sell bulbs.
    I don't sell bulbs.
    I don't sell bulbs.
    I don't sell bulbs.
    I don't sell bulbs.
    I don't sell bulbs.

  15. #15

    Default Re: $urefire E2 Mini Turbo Head

    Hi Varooj

    Paypal sent for black #4 and grey #3

    thanks

    Dave

  16. #16
    Flashaholic* lctorana's Avatar
    Join Date
    Jun 2007
    Location
    Melbourne, Australia
    Posts
    2,113

    Default Re: $urefire E2 Mini Turbo Head

    for:
    #04 Gray kit $49
    1 Extra 1499 $9
    #27 Socket only $27
    International Shipping $5 (please let me know if this isn't enough)
    Total $90

  17. #17
    *Flashaholic*
    Join Date
    Oct 2007
    Location
    Great South Bay, LINY
    Posts
    8,051

    Default Re: $urefire E2 Mini Turbo Head

    What's the size of the reflector, and is it removable?

  18. #18
    Enlightened
    Join Date
    Feb 2008
    Location
    Jakarta - Indonesia
    Posts
    89

    Default Re: $urefire E2 Mini Turbo Head

    Hi Varooj,

    (Unique Transaction ID #1NY15363GG442523V)
    #05 Black kit $49
    1 extra TL-3 bulb $7 (I hope you don't mind..)
    International Shipping $5
    Total $61


    Regards,
    FF
    Last edited by Ferry; 03-07-2010 at 05:52 PM.

  19. #19
    Flashaholic*
    Join Date
    Jul 2007
    Location
    Upland, CA
    Posts
    778

    Default Re: $urefire E2 Mini Turbo Head

    Varooj, an FM 1794 won't focus in this either?

    Thanks, Tony
    I'd rather have a flashlight in front of me than a "frontal flashlightomy"!

  20. #20
    Flashaholic mikevelarde's Avatar
    Join Date
    Jul 2008
    Location
    SZ, China & Philippines(菲律宾)
    Posts
    229

    Default Re: $urefire E2 Mini Turbo Head

    I'll take #6 black kit for $49
    extra 1499 bulb for $9
    shipping $5
    E2e socket with TL3 $34
    FM MN bi pin socket $48

    Unique Transaction ID #4X841470D4474943F
    Last edited by mikevelarde; 03-08-2010 at 02:12 AM. Reason: paypal sent
    Incan: Megallenium w/FM MN WA1185M3 + M4 body lego w/LF EO M3,Strider M2 w/P61, 9P+G4 D26 WA1185, 6P+G4 D26 WA1111,E2e-CJ, E1Ws and E2Ws,E2eHA-BK ,E2e-BK,E2eHA,2 x 3Dmag85,2Dmag61,mag5D ROP Hi,Mag4D ROP Hi.LED:0

  21. #21
    Flashaholic* bigchelis's Avatar
    Join Date
    Oct 2008
    Location
    Morgan Hill, CA
    Posts
    3,368

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by donn_ View Post
    What's the size of the reflector, and is it removable?

    +1

    What is the size of the reflector. It looks about the size of a P60 drop-in.

    What about a beamshoot of the reflector itself. Please.
    Surefire 6P with Malkoff M60 simple, bright, efficient.

  22. #22
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by donn_ View Post
    What's the size of the reflector, and is it removable?
    Reflector diameter is about 25mm with LOP texture and of course removeable.

    Quote Originally Posted by naked2 View Post
    FM 1794 won't focus in this either?
    Will fit and focus perfectly if you have or can obtain one.

  23. #23
    Flashaholic* RichS's Avatar
    Join Date
    Oct 2007
    Location
    USA
    Posts
    1,461

    Default Re: $urefire E2 Mini Turbo Head


    #05 Gray kit - $49
    2 Extra 1499 - $18
    Shipping to States - $4

    Total - $71

    You're killing me with all this innovation FM!! Why do you have to constantly create the exact items that appeal to me? My wallet does not like you very much...

    Awesome stuff FM...

    -Rich

  24. #24
    Flashaholic*
    Join Date
    Nov 2004
    Location
    Adelaide, Australia
    Posts
    1,557

    Default Re: $urefire E2 Mini Turbo Head

    # 06 Gray kit, thank you.......US$54.00 on the way

  25. #25
    *Flashaholic*
    Join Date
    Oct 2007
    Location
    Great South Bay, LINY
    Posts
    8,051

    Default Re: $urefire E2 Mini Turbo Head

    for:

    #07 Black kit Shipping March 10-2010
    #08 Black kit Shipping March 10-2010

    10x Extra 1499 $9


  26. #26
    Flashaholic* senna94's Avatar
    Join Date
    Dec 2005
    Location
    Houston, Texas
    Posts
    1,730

    Default Re: $urefire E2 Mini Turbo Head

    FM,

    I received mine today and noticed that there is some assembly required regarding the Carly lamp. The stems are very long and when installed hit the inside glass of the turbo head. Any suggestions as to exactly how long to cut these or is it just trial and error?

    thanks,
    Last edited by senna94; 03-10-2010 at 03:14 PM.
    "The Constitution says promote the the general welfare not provide welfare." -Allen West-
    To a democrat freedom means freedom from responsibility.

  27. #27
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,530

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by senna94 View Post
    FM,

    I received mine today and noticed that there is some assembly required regarding the Carly lamp. The stems are very long and when installed hit the inside glass of the turbo head. Any suggestions as to exactly how long to cut these or is it just trial and error?

    thanks,
    All CL1499 bulbs come with uncut legs or pins. You need to cut and shorten the pins to length of about 4.5mm from buttom of bulb glass.
    Make sure to trim end of bulb pins.

  28. #28
    Flashaholic* senna94's Avatar
    Join Date
    Dec 2005
    Location
    Houston, Texas
    Posts
    1,730

    Default Re: $urefire E2 Mini Turbo Head

    Quote Originally Posted by fivemega View Post
    All CL1499 bulbs come with uncut legs or pins. You need to cut and shorten the pins to length of about 4.5mm from buttom of bulb glass.
    Make sure to trim end of bulb pins.
    That is what I figured. I kept trimming a little at a time until I got a focused beam. The turbo head is very nice.

    Thanks FM!!
    "The Constitution says promote the the general welfare not provide welfare." -Allen West-
    To a democrat freedom means freedom from responsibility.

  29. #29
    Flashaholic* senna94's Avatar
    Join Date
    Dec 2005
    Location
    Houston, Texas
    Posts
    1,730

    Default Re: $urefire E2 Mini Turbo Head

    Got to take it outside as soon as it got dark. All I can say is WOW!!!!! This is a true incandescent pocket rocket!!! You will not be disappointed.
    "The Constitution says promote the the general welfare not provide welfare." -Allen West-
    To a democrat freedom means freedom from responsibility.

  30. #30
    Flashaholic*
    Join Date
    Jul 2007
    Location
    Upland, CA
    Posts
    778

    Default Re: $urefire E2 Mini Turbo Head

    Varooj, another question:

    Is there an available 3.7V bulb that will focus in this, to use it with a single cell body (E1, FM 1x 16340/1x 18500, etc.)?

    Thanks, Tony
    I'd rather have a flashlight in front of me than a "frontal flashlightomy"!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •