Innovative and high-quality Rofis flashlight
Page 1 of 3 123 LastLast
Results 1 to 30 of 75

Thread: M6 Deep Tail Cap 2x26500

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default M6 Deep Tail Cap 2x26500

    (AVAILABLE.)

    NOTE: Please allow 7 days to ship


    Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
    All these information will be next to your CPF handle in this post.
    All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.




    Please read completely before you post or buy then pay and post.

    Absolutely NO reservation.


    Hi Folks,
    These deep tail caps are CNC machined from solid aluminum bar and Mil spec hard anodized to fit on your favorite $urefire M6 to accept 2 AW's IMR 26500, 2 AW's protected "C" cells or 25530 cells.
    These will add little length (about 10mm) to your flashlight and just enough to accept above batteries.
    Each tail cap comes with installed black switch boot and PVC tube to center the batteries. McClicky switch and retaining ring is NOT included but optional for $14 extra.
    All you need to do is remove original tail cap, remove original battery holder and install PVC tube, 2x26500/25530 cells and deep tail cap.
    Please note: NO M6 body included, NO head, NO lamp, NO battery, NO charger.
    McClickie switch and retaining ring is not included in price but optional for $14 extra.
    Advantages:
    1- You don't have to buy expensive battery holder.
    2- You will have higher capacity cells.
    3- Capable of higher current draw.
    4- You can have it installed McClickie switch or install your own Type B soft start
    5- Keep original tail cap intact.
    6- No extension tube needed.

    Picture shows M6 with installed deep tail cap in top, then included PVC tube, 2xIMR 26500 (NOT INCLUDED) and inside of deep tail cap with optional installed McClickie (buttom right)
    Please study about voltage and lamps you can use with these set ups.
    DO NOT USE 2 FULLY RECHARGED IMR26500 with MN21


    No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
    Please don't pay if you may change your mind. There will not be any refund.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
    Example:
    Mr Manfire of $44 for #68 Deep Tail Cap with black boot
    Price:
    $38 without switch (to use with you own soft start switch only)
    $52 with installed McClickie switch.
    $10 PVC tube only (NOT AVAILABLE)
    Extra black boot $1 each
    Extra orange boot $1 each
    Extra GID boot $1 each
    Shipping $6 any quantity to States.
    Internationally: $12 for first kit then add $8 for each eatra kit.
    Paypal: fivemega@aol.com
    Please PM for postal money order payment.
    -----------------------
    Please see:
    S 3x18650 Megalennium-B
    Parallel 3x18650 Megalennium
    2x18650 M4 Body
    2x26500 Megalennium

    -----------------------

    #01 M6 Deep Tail Kit $52 Steve in SoCal paid shipped 0308073000016683XXXX
    #02 M6 Deep Tail Kit $52 Bob96 paid shipped 0308073000016683XXXX
    #03 M6 Deep Tail Kit $52 Visible EM Wave paid shipped LC547565352US
    #04 M6 Deep Tail Kit $52 LightJunk paid shipped 0308073000016684XXXX
    #05 M6 Deep Tail Kit $52 jdriller paid shipped 0308073000016684XXXX
    #06 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped 0308073000016683XXXX
    #07 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped 0308073000016683XXXX
    #08 M6 Deep Tail Kit $38 AW paid shipped LC547565406US
    #09 M6 Deep Tail Kit $38 AW paid shipped LC547565406US
    #10 M6 Deep Tail Kit $52 william lafferty paid shipped 23080440000026159789
    #11 M6 Deep Tail Kit $38 iflyjts paid shipped 03092880000109957168
    #12 M6 Deep Tail Kit $52 taylor paid shipped LC547780308US
    #14 M6 Deep Tail Kit $52 monkeyboy paid shipped LC548066906US
    #15 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
    #16 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
    #17 M6 Deep Tail Kit $52 taylor paid shipped LC548067022US
    #18 M6 Deep Tail Kit $38 Siliconti paid shipped 03103490000027884090
    #19 M6 Deep Tail Kit $52 nbjly paid shipped 03103490000027889910
    #20 M6 Deep Tail Kit $38 syncytial paid shipped CP721456965US
    #21 M6 Deep Tail Kit $52 milomilo paid shipped LC458383777US
    #22 M6 Deep Tail Kit $52 crazy11 paid shipped 03112550000196383908
    #23 M6 Deep Tail Kit $52 koala paid shipped LC452889574US
    #24 M6 Deep Tail Kit $52 elho paid shipped
    #25 M6 Deep Tail Kit $52 1Tinman MO received shipped 95001108929031025165
    #26 M6 Deep Tail Kit $52 geromdan paid shipped LC105690883US
    #27 M6 Deep Tail Kit $52 WarriorOfLight paid shipped LC105690897US
    #28 M6 Deep Tail Kit $52 dsche paid shipped 9114901159815876963072
    #29 M6 Deep Tail Kit $52 m4a1usr paid shipped 9114901159818832566362
    #30 M6 Deep Tail Kit $52 Redhat703 paid shipped 9114901159815961076915
    #31 M6 Deep Tail Kit $52 MBentz paid shipped 9114901159815876916825
    #32 M6 Deep Tail Kit $52 Fibo paid shipped LC333379417US
    #33 M6 Deep Tail Kit $52 Fibo paid shipped LC333379479US
    #34 M6 Deep Tail Kit $52 jmm244 paid shipped 9114901159815396497477
    #35 M6 Deep Tail Kit $52 Icehole paid shipped 23071770000008635054
    #36 M6 Deep Tail Kit $52 Icehole paid shipped 23071770000008635054
    #37 M6 Deep Tail Kit $52 jso902 paid shipped 9114999944238010732667
    #38 M6 Deep Tail Kit $52 hombreluhrs paid shipped 9114999944238010732957
    #39 M6 Deep Tail Kit $52 1pt21 paid shipped 9114999944238373515433
    #40 M6 Deep Tail Kit $52 Fibo paid shipped LC550404514US
    #41 M6 Deep Tail Kit $52 Long RunTime paid shipped 9114999944238373464670

    #42 M6 Deep Tail Kit (AVAILABLE)
    #43 M6 Deep Tail Kit (AVAILABLE)
    #44 M6 Deep Tail Kit (AVAILABLE)
    #45 M6 Deep Tail Kit (AVAILABLE)
    #46 M6 Deep Tail Kit (AVAILABLE)

    -----------------------
    #01 PVC tube only (Without Tailcap) $10 dsche paid shipped 9114901159815876963072
    #02 PVC tube only (Without Tailcap) $10 m4a1usr paid shipped 9114901159818832566362

    ----------------------
    Please find link of my other products here and click on each link you are interested on.
    -----------------------
    (A V A I L A B L E)
    Last edited by fivemega; 11-21-2014 at 04:20 PM.

  2. #2
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by djans1397 View Post
    HOW much longer is this compared to the original tailcap?
    About 10mm longer.


    Quote Originally Posted by djans1397 View Post
    Can I also use my original switch or do I need a McClicky?
    You can NOT use original switch.
    You will need either McClicky or AW's soft start at your choice.



    Quote Originally Posted by djans1397 View Post
    OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?
    This will give you 8.4 volt which is not suitable for WA1185
    WA1274 is an excellent match but lower output.
    Slightly bleeded cells can be used with 5761


    Quote Originally Posted by Tojvo Glumov View Post
    Can you say if this tailcap would work with 6x17500 battery holder ($38) from this topic?
    Sorry, nothing is available from closed threads.
    Please click
    here and find blue link of currently available items.
    Item pictured in post #1 of this thread is to use with 2 IMR 26500 cells, 2 unprotected 25500 or 2 protected 25530.


    Quote Originally Posted by MBentz View Post
    Is the PVC tube necessary?
    Inside diameter of M6 is about 37mm while diameter of 26500 cell is about 26mm and in order to keep the cells center, PVC tube is needed.

    Quote Originally Posted by MBentz View Post
    If I wanted a tail cap with a McClicky and tube, the grand total would be $68 shipped inside of California?
    Each tail cap with installed McClicky and PVC tube is $52 and shipping to Stats is $6 so grand total will be $58

    Quote Originally Posted by MBentz View Post
    I can clearly hear the spacer moving.
    Some included foam will stop the spacer tube from moving.

    Quote Originally Posted by hombreluhrs View Post
    I guess you don't have any more PVC tubes for these?
    also what color are these? It's kind of hard to tell on my screen.
    Sorry, no extra PVC but each kit comes with one PVC tube.
    Tail cap is natural/grey HA pretty close to match M6 body.


    Quote Originally Posted by jso902 View Post
    is there a difference between using a 26500 button top and non button top batteries? AW no longer makes 26500's.
    When using protected batteries such as these current capability wouldn't be as good as IMRs but good to use with LEDs and low current incand bulbs.
    Last edited by fivemega; 07-05-2014 at 01:40 PM.

  3. #3
    Flashaholic Steve in SoCal's Avatar
    Join Date
    Sep 2009
    Location
    Los Gatos (previously OC), California
    Posts
    283

    Default Re: M6 Deep Tail Cap 2x26500

    Thanks for making these.

    I'll take

    #01 M6 Deep Tail Kit with installed clickie

    $52 + $6 = $58


    Last edited by Steve in SoCal; 03-17-2010 at 11:06 PM.

  4. #4
    Flashaholic* djans1397's Avatar
    Join Date
    Jul 2007
    Location
    Cut Bank, Montana
    Posts
    745

    Default Re: M6 Deep Tail Cap 2x26500

    REALLY COOL!

    I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

    Can I also use my original switch or do I need a McClicky?

    OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

    Thanks much and I'll likely get one anyway, just had a few ?'s

    Dan
    For you were once darkness, but now you are light in the Lord. Live as children of light (Ephesians 5:8 NIV)

  5. #5

    Default Re: M6 Deep Tail Cap 2x26500

    Paypal Sent for #2 M6 - Deep Tail Kit with McClicky
    $38 + $14 + $6 = $59
    Thanks,
    Bob96

  6. #6
    Flashaholic
    Join Date
    Jun 2006
    Location
    Toronto, Canada
    Posts
    251

    Default Re: M6 Deep Tail Cap 2x26500

    of $58 for #3 Deep Tail Cap with with installed McClickie switch and shipping to Canada

  7. #7

    Default Re: M6 Deep Tail Cap 2x26500


    This is for #05 M6 Deep Tail Kit
    $52 with installed McClickie switch.
    Extra black boot $1 each
    Extra orange boot $1 each
    Extra GID boot $1 each
    Shipping $6 = $61
    Thanks, V
    I'm glad it is dark, half of the time.

  8. #8
    Flashaholic* djans1397's Avatar
    Join Date
    Jul 2007
    Location
    Cut Bank, Montana
    Posts
    745

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by djans1397 View Post
    REALLY COOL!

    I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

    Can I also use my original switch or do I need a McClicky?

    OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

    Thanks much and I'll likely get one anyway, just had a few ?'s

    Dan

    Hello? Does anyone know the answers to my questions?

    Thanks,
    Dan
    For you were once darkness, but now you are light in the Lord. Live as children of light (Ephesians 5:8 NIV)

  9. #9

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by djans1397 View Post
    REALLY COOL!

    I can't tell by the pics, but HOW much longer is this compared to the original tailcap?

    About 1/2 inch

    Can I also use my original switch or do I need a McClicky?

    Need McClicky or soft start

    OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?

    This is 8.4v. It won't be as bright as the 3x17670's (12v)

    Thanks much and I'll likely get one anyway, just had a few ?'s

    Dan
    I'm glad it is dark, half of the time.

  10. #10
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by djans1397 View Post
    HOW much longer is this compared to the original tailcap?
    About 10mm longer.


    Quote Originally Posted by djans1397 View Post
    Can I also use my original switch or do I need a McClicky?
    You can NOT use original switch.
    You will need either McClicky or AW's soft start at your choice.



    Quote Originally Posted by djans1397 View Post
    OK, I'm lazy here, but will this give me longer run times using my 1185 and 3 x 17670's?
    This will give you 8.4 volt which is not suitable for WA1185
    WA1274 is an excellent match but lower output.
    Slightly bleeded cells can be used with 5761 (Soft start is necessary)

  11. #11
    Flashaholic* djans1397's Avatar
    Join Date
    Jul 2007
    Location
    Cut Bank, Montana
    Posts
    745

    Default Re: M6 Deep Tail Cap 2x26500

    Thanks jdriller and FM. I was hoping for longer runtimes with this set up for my 1185. I'll have to respectfully pass on this at this time. Always good to see new products from you though FM! Keep up the awesome work you do

    Dan
    For you were once darkness, but now you are light in the Lord. Live as children of light (Ephesians 5:8 NIV)

  12. #12
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by djans1397 View Post
    I was hoping for longer runtimes with this set up for my 1185.
    For longer run time with WA1185 3x18650 Megalennium will work better.

  13. #13
    Flashaholic Steve in SoCal's Avatar
    Join Date
    Sep 2009
    Location
    Los Gatos (previously OC), California
    Posts
    283

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by fivemega View Post

    Hi Folks,
    These deep tail caps are CNC machined from solid aluminum bar ... to accept 2 AW's IMR 26500, 2 AW's protected "C" cells or 25530 cells.
    FiveMega thank you for another great product. The cells recommended above vary in length a bit with some 50mm in length and some 53/54 mm in length. What is your recommendation for best fit?

  14. #14

    Default Re: M6 Deep Tail Cap 2x26500

    Received my M6 kit = Super fast shipping. High quality item. Looks great and fits perfectly in my M6.

  15. #15
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by Steve in SoCal View Post
    FiveMega thank you for another great product. The cells recommended above vary in length a bit with some 50mm in length and some 53/54 mm in length. What is your recommendation for best fit?
    Switch spring and lamp spring will compensate length difference.
    Obviously protected (longer) cells will compress springs harder.
    Each bulb may react and perform differently with different chemistry cells and you need pick best for your needs.

  16. #16
    Flashaholic
    Join Date
    Sep 2008
    Location
    Moscow, Russia
    Posts
    143

    Default Re: M6 Deep Tail Cap 2x26500

    FM,
    I'm planning to use this tail cap with your 6x17500 serial or 3P/2S holder. Will it work? What do you think?

  17. #17
    Flashaholic* EvilLithiumMan's Avatar
    Join Date
    Nov 2003
    Location
    El Cajon, CA
    Posts
    546

    Default Re: M6 Deep Tail Cap 2x26500

    for

    #06 M6 Deep Tail Kit $38
    #07 M6 Deep Tail Kit $38
    Extra GID boot x2 $2
    Shipping $6
    SF G2+KT1, C3, E1E. SL Poly Stinger. Arc LSHF-P. MagCharger, AA MiniMag w/ MM+WO LIII S. PT20. PT40. S&W FL10. Etch-A-Sketch. Mister Microphone.

  18. #18
    Flashaholic* RichS's Avatar
    Join Date
    Oct 2007
    Location
    USA
    Posts
    1,462

    Default Re: M6 Deep Tail Cap 2x26500

    Ooooh, very nice. Would be great with an IMR-M3T (2.4A). Awesome beam, ~700 lumens, almost an hour of runtime...

    Need to free up funds for this one....

  19. #19
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by Iliger View Post
    FM,
    I'm planning to use this tail cap with your 6x17500 serial or 3P/2S holder. Will it work? What do you think?
    Using 2 protected AW's C cells with total of 107mm fits tight with these tail caps and there is no more room for 117mm length of 6x17500 battery holder.

    You will need 26mm extension to fit above battery holder.

  20. #20

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by RichS View Post
    Ooooh, very nice. Would be great with an IMR-M3T (2.4A). Awesome beam, ~700 lumens, almost an hour of runtime...

    Need to free up funds for this one....
    IMR-M3T is 3.4A - so not quite an hour, maybe 40 minutes.

    FM - this is a really nice product. Thinking about a purchase.

  21. #21
    Flashaholic* RichS's Avatar
    Join Date
    Oct 2007
    Location
    USA
    Posts
    1,462

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by ShineOnYouCrazyDiamond View Post
    IMR-M3T is 3.4A - so not quite an hour, maybe 40 minutes.

    FM - this is a really nice product. Thinking about a purchase.
    Thanks for correcting my mistake - I was thinking of the IMR-M3.

  22. #22
    Enlightened
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Smile Re: M6 Deep Tail Cap 2x26500



    #08 M6 Deep Tail Kit $38
    #09 M6 Deep Tail Kit $38
    International Shipping $10
    Total $86

    Thanks!
    AW

  23. #23
    Flashaholic*
    Join Date
    Apr 2007
    Location
    Pittsburgh, PA. USA
    Posts
    728

    Default Re: M6 Deep Tail Cap 2x26500

    I'll take 1 x M6 deep tail kit w/ McClickie................52.00
    black boot.............................................. ............ 1.00
    orange boot.............................................. .......... 1.00
    shipping.......................................... .................... 6.00

    Total............................................. .....................60.00

    Thanks,

    bill

  24. #24
    Flashaholic* EvilLithiumMan's Avatar
    Join Date
    Nov 2003
    Location
    El Cajon, CA
    Posts
    546

    Default Re: M6 Deep Tail Cap 2x26500

    I am pretty frustrated. I received AW's softstart switch today. I installed in the deep tailcap with fully charged IMR26500 cells and it won't turn on. A few things I have done to analyze the problem:

    I removed the deep tailcap. I set my Fluke meter to measure amps and placed the probes from the IMR26500 negative to the M6 body. The MN20 bulb instantly (and brillantly) came on. Clearly there is no issue with the lamp or the cells.

    The only other suspect is AW's softstart switch. I removed it from the deep tailcap and installed it in a C2. There it works fine, 3 levels, flashing and I can clearly see it is softstarting.

    So all the elements by themselves work fine. But when I put everything together, "this dog don't hunt".

    What have I overlooked? Is there anything else to check?
    SF G2+KT1, C3, E1E. SL Poly Stinger. Arc LSHF-P. MagCharger, AA MiniMag w/ MM+WO LIII S. PT20. PT40. S&W FL10. Etch-A-Sketch. Mister Microphone.

  25. #25
    Enlightened
    Join Date
    Oct 2004
    Location
    Hong Kong
    Posts
    33

    Smile Re: M6 Deep Tail Cap 2x26500

    EvilLithiumMan,

    I haven't received my two deep tail caps yet. I suggest to check if the spring of the switch is making contact with the battery -ve. If not, try to pull the spring ( very carefully not to break it off from the pcb ) to extend it just enough to make contact. Or if the switch spring is too stiff, you may try extending the lamp module spring instead.

    AW

  26. #26
    Flashaholic* EvilLithiumMan's Avatar
    Join Date
    Nov 2003
    Location
    El Cajon, CA
    Posts
    546

    Default Re: M6 Deep Tail Cap 2x26500

    Quote Originally Posted by AW View Post
    EvilLithiumMan,

    I haven't received my two deep tail caps yet. I suggest to check if the spring of the switch is making contact with the battery -ve. If not, try to pull the spring ( very carefully not to break it off from the pcb ) to extend it just enough to make contact. Or if the switch spring is too stiff, you may try extending the lamp module spring instead.

    AW
    The spring is not the problem. It's length is fine. As a matter of fact, if you hold the tailcap next to your ear while tightning it, you can hear the spring being compressed.

    But I have identified the problem. It took a close visual inspection of the deep tailcap, but I can clearly see the issue: the contact area of the deep tailcap is too far away and does not make contact with the M6 body, even when fully seated.

    Despite this situation, I now have my M6 working with the IMR26500 cells, and the solution is pretty ironic - I replaced the deep tailcap with the standard tailcap fitted with your M6 softstart switch! It works great. The only issue is that with the standard tailcap fully seated, it is about 3mm away from the lanyard ring, so there is that extra gap for the ring to flop around.

    Bottom line - I have a M6 fitted with IMR26500 cells and softstart / 3 level operation. Once again I am a happy modder.
    SF G2+KT1, C3, E1E. SL Poly Stinger. Arc LSHF-P. MagCharger, AA MiniMag w/ MM+WO LIII S. PT20. PT40. S&W FL10. Etch-A-Sketch. Mister Microphone.

  27. #27
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,585

    Default Re: M6 Deep Tail Cap 2x26500

    #01 M6 Deep Tail Kit $52 Steve in SoCal paid shipped
    #02 M6 Deep Tail Kit $52 Bob96 paid shipped
    #03 M6 Deep Tail Kit $52 Visible EM Wave paid shipped
    #04 M6 Deep Tail Kit $52 LightJunk paid shipped
    #05 M6 Deep Tail Kit $52 jdriller paid shipped
    #06 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped
    #07 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped
    #08 M6 Deep Tail Kit $38 AW paid shipped
    #09 M6 Deep Tail Kit $38 AW paid shipped
    #10 M6 Deep Tail Kit $52 william lafferty paid shipped
    ------------------------
    If there is anybody who hasen't receive his/her order, please let me know to check shipping status.

    More M6 Deep Tail Caps Available.

    Please Check Post #1 For Next Available Number.

  28. #28
    Flashaholic iflyjts's Avatar
    Join Date
    Jun 2009
    Location
    USA
    Posts
    149

    Default Re: M6 Deep Tail Cap 2x26500



    #11 M6 Deep Tail Kit with extra Orange boot $39
    Combined shipping from FM Megalennium-B order.

    thanks,

    iflyjts

  29. #29
    Enlightened taylor's Avatar
    Join Date
    May 2004
    Location
    Hong Kong
    Posts
    78

    Default Re: M6 Deep Tail Cap 2x26500

    Paypal sent for :

    #12 M6 Deep Tail Kit with black boot & installed McClickie switch $52 + $8 (International Shipping)

    Total $60 Thanks.

  30. #30

    Default Re: M6 Deep Tail Cap 2x26500

    Thank you Mr. Fivemega.

    1) I'll take #14 w/ McClicky switch -- $52
    2) xtra blackboot -- $1
    3) xtra GID boot -- $1
    4) shipping -- $6

    Total.........................................$60. 00

    Thanks,
    mosley


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •