Sold/Expired SOLD: Orb Raw Ti Clone, XPG R5, 10180.

Up for sale, is another keychain light I made for fun.

It's got the shape of Orb Raw, but smaller
With battery in, Weight in at 1/2 of my Orb NS ( 6 Oz vs. 12 Oz)
Made from Ti Key as host
Bored out the head & installed XPG R5
Using the New Lisa 2 XPG Real Spot optics
Runs on 10180 Li-ion Direct Drive
Using the Ti natural resistance, it pulls around 600 MA.
Snow white tint, no green, no blue
Tiny Tiny Tiny, bright, bright, bright.
Show between a AA battery & Raw.

A raw Ti XRE will cost about $250,
I am selling the Ti clone XPG for $85. Include one 10180 Li-ion.
Add $4 for shipping/PP fee. USA Only.

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Is that orange wire just there to keep the tube from rolling?

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Äh, I don´t get it. Which is the light for sale? I see the Orb Raw NS and obviously a modded Ti ThruNite that does not look like nor has the shape of an Orb Raw.

Eric

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Eric242 said:

Äh, I don´t get it. Which is the light for sale? I see the Orb Raw NS and obviously a modded Ti ThruNite that does not look like nor has the shape of an Orb Raw.

Eric

Click to expand...

The modded ThruNite is his version of an Orb Raw Ti clone, quite a stretch, but I think that is what he is getting at.

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Hm, that´s quite a stretch indeed

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Sorry for the stretch as a "clone", but it won't one's wallet :devil:

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

FroggyTaco said:

Is that orange wire just there to keep the tube from rolling?

Click to expand...

The wire is un related. It's just happen to be there,
I haven't get to clean the table up before the photo.

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

I want it- My second mod from you I think- need your paypal email? thanks, dave g

Re: FS: Orb Raw Ti Clone, XPG R5, 10180.

Thanks Dave,

PM sent with my PP info.

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

89 bucks- please ship to my paypal shipping address. should be david gretzmier, 613 mill and then the city, state,zip do not send to the PO box number 443. thanks, dave g

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

I was mistaken about this being my 2nd light. just the first ! hey, does purchasing a light from you get me into the secret club that finds out how you did the duracell aaa light?

Re: SPF: Orb Raw Ti Clone, XPG R5, 10180.

Sure, you have earned a key to the door of "secret club"
It's a 5mm led flashlight that I peeled the AAA warper & wrapped around it

Since it's identical looking to my other AAA batteries, I can't find it anymore,
so the secret is burried forever with the flashlight that went MIA.

I printed your shipping label, everything looks correct vs. what you said above except your PP address didn't have a name, so I added your name on top.

It's going out right now.

light came today. love it ! went on my keychain pronto. very bright, probably brighter than my 100 lumen orb wee and when fresh off charger , brighter than my 200 lumen raw al. wish it had a slightly bigger battery than a 10180, it looks like a 12180 would fit without the faom tape that is in there to keep the 10180 from rattling. but I don't think there is such a battery . but I do love it. Thanks !

David Gretzmier said:

light came today. love it ! went on my keychain pronto. very bright, probably brighter than my 100 lumen orb wee and when fresh off charger , brighter than my 200 lumen raw al. wish it had a slightly bigger battery than a 10180, it looks like a 12180 would fit without the faom tape that is in there to keep the 10180 from rattling. but I don't think there is such a battery . but I do love it. Thanks !

Click to expand...

Thanks for the feedback, I am glad you liked it! It is very bright indeed.

It would also fit 14180 if there is such a battery
Because I first spent 3 hours to bore out the tube to fit 14250, after I put the 14250 in, I realized that the tube is too short, no room for the head to go in. That was kind of dumb for me, what a waste of time

But if in the future that AW introduces 12180, 13180 or 14180, you are ready for them :laughing:

egads, the difference in length of the 10180 and 14250 is only 7 millimeters ! I knew a 14250 would fit in there, just won't thread. you have got to figure out the easy/cheap way to make the shortest 14250 xpg r5 dd and sell those suckers as keychain lights. maybe the shortest AA and cut out an inch. I saw the stainless mod you did/sold ( shoulda bought that one ) , kinda a raw SS clone. you gonna do a brass 14250 xpg up next?

David Gretzmier said:

you gonna do a brass 14250 xpg up next?

Click to expand...

Funny you asked, I love brass lights & have a Brass Cr2/14250 XPG R5 light planned,
just won't have time for a few weeks, as I am busy playing with Aspheric right now

It's going to be the shortest CR2 clicky ever, kind like a Raw with a clicky tail, in brass, XPG R5 .
.
.