Lubricant for raw ns threads

philsyson

Newly Enlightened
Joined
May 29, 2010
Messages
105
Hi All
Rob recommends Nyogel 779 for raw ns threads. Anyone know where to buy this in the uk. I can only find lighthound on google and they're US based.
Thanks
Phil
 

philsyson

Newly Enlightened
Joined
May 29, 2010
Messages
105
Done. Thanks Reeso.

Btw... My raw ns flicks on and off as you twist from low to high output settings and requires a very firm twist to activate the higher output level. Other raws don't seem to have this problem. Would you happen to know the cause?

Thanks
phil
 

soli

Newly Enlightened
Joined
Jun 4, 2009
Messages
130
I can only find lighthound on google and they're US based.

Lighthound ship internationally and amazingly it is quite reasonably priced, should only set you back about $4-5 for shipping.
 

fyrstormer

Banned
Joined
Jul 24, 2009
Messages
6,617
Location
Maryland, Near DC, USA
For copper alloys, plain old sewing machine oil is all you need, or a light lithium grease if you want a more heavily-lubricated feel. Petroleum lubricates metal better than silicone anyway. I looked into this years ago for non-flashlight-related reasons, and all the silicone products I looked at said they were intended for metal-to-nonmetal or nonmetal-to-nonmetal use only.
 
Top