Jetbeam        
Page 1 of 3 123 LastLast
Results 1 to 30 of 73

Thread: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,960

    Default (CLOSED) G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    (C L O S E D)

    6th Run
    G4 Sockets

    Hex Wrench Included
    LEFT: WA1185 - - - RIGHT: Philips 5761




    Philips 5761


    MADE IN USA


    Here I have more of these hi-temp PR base to bi-pin sockets with improved design and high quality ready to ship.
    No expensive gold plating process to keep the price low.
    Very easy to use. No tool needed, no cutting, grinding and no skills. Will fit in stock M*g C and D switch without modification.
    Simply push in your G4 bi-pin bulb, Gently tighten set screw and install in your M*g. Will work with all G4 WA bulbs such as: 1111, 1160, 1166, 1185, FM1909, Philips 5761, Osram 64275 and.... Philips 5761.
    PR base is mill machined from solid brass, for durability and best electrical connection, then electricaly seperated with hi temp material. No corrosive metal to oxidize, no glue to smoke, no soldering to melt down.
    Please G E N T L Y tighten set screw to hold bulb from falling off.
    Purpose of set screw is to hold weight of bulb only. Overtightening will cause pinch bulb pin, stock there, strip threads and void warranty. So do NOT show us power of your muscle.

    I have tested in M*g 1185 for 50 minutes continuous (overdriven to 11.1 volt) and 2-1/2D M*g for 70 minutes continuous (overdriven to 7.4 volt)
    This will work with all FM3" cammed heads and all FM Dual Function and Bi-Focal cammed reflectors.
    I do not guarantee to work with any other brand aftermarket reflectors.
    Price:
    Brass $18 for first socket and $16 for each additional one. (NOT AVAILABLE) (One Hex Wrench Included)
    Bi pin Philips 5761 $6 each (NOT AVAILABLE)
    Potted WA1185 $10 each (NOT AVAILABLE)
    Bi pin WA1274 $6 each (NOT AVAILABLE)
    Borofloat (Pyrex) lens $7.50 each (NOT AVAILABLE)
    Mineral glass lens $3 each (NOT AVAILABLE)
    Extra Hex Wrench $1 each (NOT AVAILABLE)
    Shipping $4 to States (any quantity)
    Shipping $5 internationaly (any quantity)
    Insurance $2.60 for each $100 value in States
    Insurance $6.00 for each $100 value internationally
    I am not responsible for loss or damage once I ship your package.
    Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
    Please DO NOT pay for any item not listed here.
    [b]For documentation purpose, it is Necessary to post your request here and detail of your order in Paypal note.
    Paypal: DO NOT PAY
    Please contact me for other type of payment or combine shipping.
    For documentation purpose, it is Necessary to post your request here and detail of your order in Paypal note.
    Example: Mr. Mohan for 2 brass sockets
    All comments welcome.
    -------------------------
    Please see:
    Bi-Focal Reflectors
    G5.3 sockets.
    M*gCharger slugs.
    M*g tri bundle battery holders and M*g quad bundle battery holders.

    (C L O S E D)
    Last edited by fivemega; 01-14-2012 at 03:34 AM.

  2. #2
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,960

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Reserved.

  3. #3
    Flashaholic*
    Join Date
    Dec 2009
    Location
    Bay Area, CA
    Posts
    736

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)



    2 - brass G4 Bi-Pin PR Sockets $34
    4 - Philips 5761 bulbs $24
    Shipping $4

    Total $62

    Thank you for making these available again with improvements.
    Fiend got into light re-hab. Getting out for now

  4. #4
    Flashaholic*
    Join Date
    Nov 2009
    Location
    Chesapeake, VA
    Posts
    677

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    6 - brass G4 Bi-Pin PR Sockets = $98
    Shipping = $4

    Total = $102

  5. #5

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Sending Paypal for:

    6 X G-4 Brass Bi-pin Sockets = $98
    Shipping = $4
    Total - $102

    Bob96

  6. #6

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    for

    2 X g4 bipin $34
    International Shipping $5
    total $39

    Thanks fivemega!
    Last edited by dannyk; 07-25-2010 at 06:35 PM.

  7. #7
    Unenlightened
    Join Date
    Aug 2006
    Location
    Indiana
    Posts
    15

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    PayPal sent

    1- g4 socket
    2-5761 bulbs
    Shipping
    Total- $34.00
    Thanks

  8. #8
    Flashaholic
    Join Date
    Mar 2009
    Location
    The Villages Florida
    Posts
    129

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)


    2-pin holder 34.00
    2- 1185 12.00
    ship 4.00
    ________________
    $50.00
    CPF merrimac

  9. #9

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)


    2-Bi pin sockets = $34
    Shipping = $4
    Total = $38

    Thanks!

  10. #10
    Flashaholic* Walterk's Avatar
    Join Date
    Jan 2010
    Location
    Netherlands
    Posts
    755

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)



    2 - Brass $18 for first socket and $16 for each additional one.
    1- Bi pin Philips 5761 $6 each
    2 - Bi pin WA1185 $6 each
    $5 internationaly
    Total 57usd

    Thx



  11. #11

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    for one g4 bi-pin socket...i don't think i said "G4" bi-pin socket in the paypal notes...sorry

  12. #12
    Flashaholic
    Join Date
    Sep 2009
    Location
    Indonesia
    Posts
    242

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    (1) 9AA to 3D $39
    (2) Brass socket $34
    (2) WA1185 $12
    (1) Cammed 8.5mm Bi-Focal $27
    (1) Mineral glass lens $3.00
    Shipping $9
    Total $ 124

  13. #13

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Sending Paypal for:
    G-4 - bi-pin adapter - Brass = $18
    #07 - FM3H-3 - 3" Head - Black - MOP Reflector = $193
    #01 - 5 X IMR26500 Body - Black = $108
    Stock Mag D Switch = $7
    Shipping = $12
    Total = $338

    Bob96

  14. #14

    Default Odd

    It would seem that i got an unfinished one, i just got my bulbs today and tried to slip one in the holder, but it would not go in the "negative" hole very far, so i backed the set screw all the way out and tried again, still no good. So i got me a much thinner wire and passed it down the hole, and as it turns out the depth off the hole does not even go down to the depth of the set screw hole.

  15. #15
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,960

    Default Re: Odd

    Quote Originally Posted by tstartrekdude View Post
    So i got me a much thinner wire and passed it down the hole, and as it turns out the depth off the hole does not even go down to the depth of the set screw hole.
    If a G4 bulb does not go all the way in, please send it back for replacement.

  16. #16

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Fivemega, I recently bought a deep reflector from you to use on a project. I had a change of plans and didn't use it, but still have the refector and a 2D host that I would like to do something with.

    You didn't mention that reflector as being acceptable for this pin and bulb so I'm assuming it's not a match. Can you suggest one that is?

    Thanks,
    NC
    Last edited by Nuclear Cowboy; 08-08-2010 at 06:00 AM.

  17. #17
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,960

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Quote Originally Posted by Nuclear Cowboy View Post
    Fivemega, I recently bought a deep reflector from you to use on a project. I had a change of plans and didn't use it, but still have the refector and a 2D host that I would like to do something with.
    You didn't mention that reflector as being acceptable for this pin and bulb so I'm assuming it's not a match. Can you suggest one that is?
    Thanks,
    NC
    When you using this bi pin socket with G4 bulbs, all Deep Reflectors, Bi-Focal Reflectors, 2.5" Throw Masters and 3" Heads match perfectly and can be used but make sure all mentioned reflectors must be cammed.

  18. #18
    Flashaholic* Battery Guy's Avatar
    Join Date
    Apr 2010
    Location
    Portland, Oregon
    Posts
    807

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    5X Brass G4 Sockets: $18 + 4*$16 = $82
    Shipping: $4

    total: $86

    Friends don't let friends use alkaline batteries.

  19. #19

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Quote Originally Posted by fivemega View Post
    When you using this bi pin socket with G4 bulbs, all Deep Reflectors, Bi-Focal Reflectors, 2.5" Throw Masters and 3" Heads match perfectly and can be used but make sure all mentioned reflectors must be cammed.

    Great news!

    Can I buy a cam to fit the deep reflector also? I didn't get that option when I ordered it. If so let me know how much and I'll PP you for it, a socket and some bulbs.

    Thanks,
    NC

  20. #20

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Hi, new at this. Looking for 2 of above bi pin adapters and SMO 8.5mm parabolic Mag reflector. Please help - Thanks

  21. #21
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    4,960

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Quote Originally Posted by seatrue View Post
    Hi, new at this. Looking for 2 of above bi pin adapters and SMO 8.5mm parabolic Mag reflector. Please help - Thanks
    We can help better if you tell us what size M*glite you have or plan to buy and what kind of brightness you need/want and what kind of run time is prefered.

  22. #22

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    oops mistake
    Last edited by seatrue; 08-20-2010 at 09:33 PM.

  23. #23

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Ok sorry, I just read the directions at the top of the page. (Yes, "professionally built" custom made mag lights are the way to go! WOW

  24. #24
    Unenlightened Rv7a's Avatar
    Join Date
    Apr 2010
    Location
    Texas
    Posts
    9

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Rv7a



    2 brass sockets
    $18 for first socket
    $16 for second
    Shipping:$4 (any quantity)

    Thanks FM

  25. #25

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    One brass bi pin + shipping $22

  26. #26

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    for another order:
    One brass bi pin $18
    One mineral lens $3
    Shipping $4

    -Thanks

  27. #27

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    hi just wondered if you still had some of these g4 holders left?

  28. #28
    Flashaholic
    Join Date
    May 2008
    Location
    The Netherlands
    Posts
    266

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    Yes, he has, it's just a new run

    I bought the sockets that Walterk bought from him. Very nice quality. Much better than the KD socket I have in my Mag85

  29. #29

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    sending paypal

    2 X g4 bipin $34
    International Shipping $5
    total $39

    Cheers

  30. #30

    Default Re: G4 Bi-Pin PR Sockets By FiveMega (6th Run)

    I'll take two brass sockets.

    2x G4 bi-pin = $34
    Shipping = $4
    Total = $38


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •