400 lumens LED

DavyCrockett

Newly Enlightened
Joined
Jul 7, 2010
Messages
99
Location
Rocky Mts.
Can one get 400 lumens out of 3 AAA batteries?

Or put another way, what's the most lumens one could expect from 3 AAA's, LED?
 
Last edited:

Cheapskate

Enlightened
Joined
Feb 24, 2008
Messages
346
Location
Ireland
Possibly, but not for long.

You can get 320 lumens out of a Quark AA mini running on a single 14500. Again, not for long as it gets hot fast.
 

Saint_Dogbert

Enlightened
Joined
Feb 5, 2009
Messages
405
Location
USA
At the current draw necessary for that output, it probably wouldn't be safe. You wouldn't get much burntime, either.
 

dsche

Newly Enlightened
Joined
Dec 4, 2009
Messages
163
Location
Perm, Ural
400 lumens?

It's easy

Driver with 1200mA output and one XPG R5 will give you 400 lum
 

snapjax

Newly Enlightened
Joined
May 20, 2010
Messages
6
@Glenn7

those lights are AA

try googling for the X2000 flashlight, if you're interested in a long throw torchlight
 

LEDninja

Flashlight Enthusiast
Joined
Jun 15, 2005
Messages
4,896
Location
Hamilton Canada
The sunwayleds use AA batteries not AAA. There is a fair difference in size.

3AAA batteries do not have enough juice to drive the more powerful LEDs. This is a typical runtime graph. Starts out at 130 lumens, drops to 80 lumens and stays there.
Kai130lumen3AAAruntime.gif

Even if you put in a more powerful LED that can do 400 lumens, the light will drop to 80 lumens even quicker maybe 3 - 5 minutes instead of 25 minutes for the 'Kai 130 lumen'.
And if you are using alkaline AAAs the batteries won't even give you the output. Even alkaline Ds cannot properly power a P7/MCE.
 

DavyCrockett

Newly Enlightened
Joined
Jul 7, 2010
Messages
99
Location
Rocky Mts.
Thanks everyone. Snapjax, have you tried and liked one of those X2000 ones? Does it really seem like 400 lumens?
 

joe1512

Enlightened
Joined
Jan 7, 2010
Messages
755
That x2000 is not even close to 400 lumens just FYI. It probably hits about 100 out the front.

The fact is that an XP-G emitter fully driven can hit around 250 out the front. A Q5 or whatever is in the x2000 is going to be less efficient and even at maximum drive will only hit 200ish real lumens.

A DX light like the X2000 will not fully drive the emitter. It is probably around 0.8 amps.


So the answer is YES: You COULD custom make an XP-G overdriven light that briefly gets 400 out the front lumens. Or a special light that uses an SST-50 and squeaks out 400. Neither of which would be very practical though. You are either burning the emitter or overloading your batteries bigtime.


I suspect the question you are really asking is: Can I buy a 3xAAA light that gets 400 lumens? The answer is no.
 
Top