What pieces do I purchase for E-series 18650 hosts....

[bigchelis]

Hi,

I want to purchase the lego pieces needed to make an E-series (e1e bezel) 18650 body and tail can be C or E series.


Please help..I am ready to order, but still confussed.

Thank you,
bigC

[Bogus1]

We never machined the E Series 18650 tubes. You can use TnC SF-Series 18650 tubes, but these will only work with Aleph heads, not all E Series heads, if you order the TnC SF-Series Aleph adaptor for the tube. Sorry for the confusion.

[bigchelis]

We never machined the E Series 18650 tubes. You can use TnC SF-Series 18650 tubes, but these will only work with Aleph heads, not all E Series heads, if you order the TnC SF-Series Aleph adaptor for the tube. Sorry for the confusion.

That is what I wanted to purchase. The TnC SF-Series 18650 body and Aleph Adaptor.

So, it will physically screw on an E-series bezel, but it might not work with all E-series bezels (contact, height, ect..).

Thanks,
bigC

[Bogus1]

That is what I wanted to purchase. The TnC SF-Series 18650 body and Aleph Adaptor.

So, it will physically screw on an E-series bezel, but it might not work with all E-series bezels (contact, height, ect..).

Thanks,
bigC

I thought I responded to this but don't see the post, sorry for the delay.

The empty bezel will screw on, but without modification you likely wouldn't be able to run a lamp assembly, as the aleph adaptor is machined to use the TnC LED canisters.

TnC SF-Series Power Pack for Aleph Heads (HA-Black)

TnC SF-Series Power Pack for Aleph Heads (HA-Natural)

TnC SF-Series 18650 Battery Tube (Bare)

TnC SF-Series 18650 Battery Tube (HA-Natural)

Here are the links to these parts.

Please let me know if I can help.

[Drywolf]

Is there a Ti 18650 tube and tail cap that I could screw my McGizmo Haiku head on? Would like to use AW's 2600 or 2900mah protected cell.

Will these work and are they available?

18650 cell tube: v1 & v5-2 $399 (optional Ti clip $15 extra)

18650 EDC-Flex tube with extender installed next to (2) 18650 battery cells.

Also AA body and tail cap.

Thank you,
Frank

[Bogus1]

Hi Dry Frank,

I'm sorry but we don't have that part available. It's possible Chris might do a small run. The way to find out would be to post a thread with interest and see if others chime in. I do have a few Cr123 Ti tubes as well as heads, but no 18650 tubes. We do have larger C-Flex tubes with E Series adaptors, but those are larger and aluminum.

Please let me know if I can help.

thanks,
Eric