Z
z_benwilliamson86
Guest
Hello :wave: this is my first post but i've been researching the forums for a couple of days. I've decided to go ahead and make a modified 2D maglite and wanted to post all the parts i've ordered for your opinions and to check i got it right:
2D Maglite
DSWOI P7 Emitter
Britelumens Deluxe P7 Mag D Heatsink
Der Wichtel Buck Driver
Arcitic Adhesive
Arctic Ceramic paste
6 x Sanyo Eneloop AA
2 x Kaidomain (3AA - 2D) converter
UCL glass lens
Other questions i have are:
What reflector would you reccommend for increasing the 'throw'?
Do you think that is the best battery setup or would i better with 2 x 18650's or perhaps 4 x CR123's? ( i chose the AA's because i thought it would be closest to the vf voltage for efficiency and more capacity)
How would a light like this which has probably cost around £80 to make, stack up next to a ROP mag?
and finally.....
I can't find any 24awg teflon wire. If someone can post me a short length i'd be happy to paypal them some funds.
Sorry for so many questions!
Ben.
2D Maglite
DSWOI P7 Emitter
Britelumens Deluxe P7 Mag D Heatsink
Der Wichtel Buck Driver
Arcitic Adhesive
Arctic Ceramic paste
6 x Sanyo Eneloop AA
2 x Kaidomain (3AA - 2D) converter
UCL glass lens
Other questions i have are:
What reflector would you reccommend for increasing the 'throw'?
Do you think that is the best battery setup or would i better with 2 x 18650's or perhaps 4 x CR123's? ( i chose the AA's because i thought it would be closest to the vf voltage for efficiency and more capacity)
How would a light like this which has probably cost around £80 to make, stack up next to a ROP mag?
and finally.....
I can't find any 24awg teflon wire. If someone can post me a short length i'd be happy to paypal them some funds.
Sorry for so many questions!
Ben.