Battery Junction - Olight
Page 2 of 3 FirstFirst 123 LastLast
Results 31 to 60 of 61

Thread: *NEW* Cree XM-L Mag Drop-In

  1. #31

    Default Re: *NEW* Cree XM-L Mag Drop-In

    In the video of installation, how is it that this powerful mod doesn't require a glass lens?
    INCAN 2 C Mag modded with 5 or 6 D bulb | 2 Mag ROP Low or High | Cabelas XPG 120 lumen | Cabelas XPG 180 Lumen LED Ultrafire C8 XML | Colemen Max 90 Lumen | Coleman MC-E 500 Lumen | 4 D Mag

  2. #32
    Flashaholic* Morelite's Avatar
    Join Date
    Nov 2005
    Location
    Central PA
    Posts
    2,238

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by Rusty Joe View Post
    In the video of installation, how is it that this powerful mod doesn't require a glass lens?
    Probably because most of the heat is formed at the base of the emitter and not in the emitted light or glass bulb as it is in an incandescent.

  3. #33
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by Rusty Joe View Post
    In the video of installation, how is it that this powerful mod doesn't require a glass lens?
    I would get glass for better clarity

  4. #34

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by cdrake261 View Post
    ...still waiting.....

    Your module will ship tomorrow. I typically do not have these in stock and are built up when ordered. I have a batch of 20 or so lights that Im trying to get out and apologize for the delay on the Drop-in.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  5. #35

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by Lightdadark View Post
    There is no waiting list, but there is still a long wait for delivery?
    Yes even though there is no waiting list I have 100 other projects going on

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  6. #36
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by cmacclel View Post
    Your module will ship tomorrow. I typically do not have these in stock and are built up when ordered. I have a batch of 20 or so lights that Im trying to get out and apologize for the delay on the Drop-in.

    Mac
    Ok, just trying to keep my patience in check... Not meaning to rush or anything. I can't wait!! :-)

  7. #37

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Mac, What is the ideal battery configuration for the XM-L in a 2D? Thanks

  8. #38
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    expecting my maglite drop in today....oh boy!!!

  9. #39

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by gatorgofer View Post
    Mac, What is the ideal battery configuration for the XM-L in a 2D? Thanks

    3x 1/2 "D" cells

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  10. #40
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by gatorgofer View Post
    Mac, What is the ideal battery configuration for the XM-L in a 2D? Thanks
    Why not get a 3D or 4D maglite and three or four tenergy 10100?

  11. #41

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Well, A 2D host is what I have at the moment and that's about as big as I care to carry on my walks. I am curious however, how many Lumens and how much run time the 3 1/2D's provide?

  12. #42
    Flashaholic* bigchelis's Avatar
    Join Date
    Oct 2008
    Location
    Morgan Hill, CA
    Posts
    3,367

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by gatorgofer View Post
    Well, A 2D host is what I have at the moment and that's about as big as I care to carry on my walks. I am curious however, how many Lumens and how much run time the 3 1/2D's provide?
    You can fit 3 NiMH C cells by Tenergy in a 2D Mag. Just take off the paint inside the tailcap and cut the spring really short.

    Then just go to Hardware store and get some PvC pipe cut to lengh and use as a battery holder. This is what I do.

    bigC
    Surefire 6P with Malkoff M60 simple, bright, efficient.

  13. #43
    Thread Killer Illum's Avatar
    Join Date
    Apr 2006
    Location
    Central Florida, USA
    Posts
    12,557

    Default Re: *NEW* Cree XM-L Mag Drop-In

    With the new 3000K XMLs floating about, has there been any additions in the line of drop-ins?

  14. #44
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by gatorgofer View Post
    Well, A 2D host is what I have at the moment and that's about as big as I care to carry on my walks. I am curious however, how many Lumens and how much run time the 3 1/2D's provide?
    Hard to say without measuring equipment, but about what my tk30 is as far as brightness but throw is superior. I use a 4D mag and I got my flashlight last week and I yet to charge my batteries. The guy who posted after you made a good point using c-cells instead...carrying a 4D takes a little bit to get used to, but plus side is that I can use it as a batting weapon as well as a blinding light. Just food for thought...

  15. #45
    Enlightened redswr's Avatar
    Join Date
    Aug 2011
    Location
    California
    Posts
    60

    Default Re: *NEW* Cree XM-L Mag Drop-In

    hmm... kinda wish i woulda saw this before i just got my Malkoff drop in... i was wanting the multi mode switch, maybe i'll get this for my 2D i have laying around. Can you run a 2 or 3 AA to D set up or the half D's pretty much the only way to go? i dont' have a charger and kinda am on a budget...
    Enlightend? Hmm... almost!

  16. #46

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by Illum View Post
    With the new 3000K XMLs floating about, has there been any additions in the line of drop-ins?

    No sales for the drop-ins has slowed to the point that I will not be making another batch unless the demand rises.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  17. #47
    Flashaholic* GLOCK18's Avatar
    Join Date
    Jan 2008
    Location
    San Diego,Ca
    Posts
    878

    Default Re: *NEW* Cree XM-L Mag Drop-In

    I would be in for 1 3000K XMLs drop in if you make some.

  18. #48

    Default Re: *NEW* Cree XM-L Mag Drop-In

    ^ ditto

  19. #49
    Flashaholic
    Join Date
    Mar 2011
    Location
    Ohio, USA
    Posts
    249

    Default

    Quote Originally Posted by GLOCK18 View Post
    I would be in for 1 3000K XMLs drop in if you make some.
    +1



    Sent from my PC36100 using Tapatalk

  20. #50

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Put me down for a 4500 should you decide to make more.

  21. #51

    Default Re: *NEW* Cree XM-L Mag Drop-In

    I want one too...

  22. #52

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Count me for one too Mac! Any chance demand has risen enough yet to make some more drop ins for a maglite? I'm dying for your product and I've been hunting all over!

  23. #53

    Default Re: *NEW* Cree XM-L Mag Drop-In

    I hope you decide to make more, I would like one of these.



    Thanks

    xpshooter

  24. #54
    Flashaholic N10's Avatar
    Join Date
    Oct 2007
    Location
    Montreal
    Posts
    190

    Default Re: *NEW* Cree XM-L Mag Drop-In

    mac, on your website u said you do take money orders right(canada post money order)?...i'm still deciding whether i'm going to get this drop in but wanted to get more info...i've searched a little around the forum and couldn't really find any review of this drop in..
    what i wanted to know is what is the beam like cause i'm looking for a more throwy type kind of beam

  25. #55
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by N10 View Post
    mac, on your website u said you do take money orders right(canada post money order)?...i'm still deciding whether i'm going to get this drop in but wanted to get more info...i've searched a little around the forum and couldn't really find any review of this drop in..
    what i wanted to know is what is the beam like cause i'm looking for a more throwy type kind of beam
    I had the xm-l drop in...it's nice and does throw good, get it, you'll love it!

  26. #56
    Flashaholic N10's Avatar
    Join Date
    Oct 2007
    Location
    Montreal
    Posts
    190

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by cdrake261 View Post
    I had the xm-l drop in...it's nice and does throw good, get it, you'll love it!
    i wanted to ask.. the drop in is fully regulated right? just asking cAuse its not mentioned on the website..thanks

  27. #57
    Flashaholic N10's Avatar
    Join Date
    Oct 2007
    Location
    Montreal
    Posts
    190

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by cdrake261 View Post
    I had the xm-l drop in...it's nice and does throw good, get it, you'll love it!
    i wanted to ask.. the drop in is fully regulated right? just asking cAuse its not mentioned on the website..thanks

  28. #58

    Default Re: *NEW* Cree XM-L Mag Drop-In

    Quote Originally Posted by N10 View Post
    i wanted to ask.. the drop in is fully regulated right? just asking cAuse its not mentioned on the website..thanks
    The drop-in uses a 7135 chip boards with a maximum input voltage of 6v. It' not a fully regulted driver board.

    Mac
    www.macscustoms.com
    *Note* Shipping Insurance must be requested.

  29. #59
    Flashaholic cdrake261's Avatar
    Join Date
    Jun 2011
    Location
    Columbus, IN
    Posts
    438

    Default Re: *NEW* Cree XM-L Mag Drop-In

    I would love to have another xm-l version only with a taskled driver, but that's just silly talk! :-P

  30. #60
    Flashaholic N10's Avatar
    Join Date
    Oct 2007
    Location
    Montreal
    Posts
    190

    Default Re: *NEW* Cree XM-L Mag Drop-In

    drop ins aren't available atm guys will have to wait or get find one on the marketplace

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •