Black Moon LTD
Results 1 to 28 of 28

Thread: 32650 D36 & 8AA D36

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default 32650 D36 & 8AA D36

    (AVAILABLE)

    Please allow 7 days to ship


    Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
    All these information will be next to your CPF handle in this post.
    All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.



    Left: 8 Serial NiMH 9.6 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right: 4 Serial NiZn (6.4 Volt)


    4 Serial NiZn (6.4 Volt)

    Please read completely before you post or buy then pay and post.

    Absolutely NO reservation..


    Hi folks, Here is another new toy for you.
    These bodies are similar to these but takes D36 and come with bezel and Borofloat lens. D36 module and battery/battery holder are (NOT INCLUDED).
    Bodies have larger ID to accomodate 32mm cell.
    Short version will work with single 32700, 32650, single 26650 with sleeve or 4AA rechargeable. (battery holder not included)
    Long version will work with 8AA only.
    Please note that using NiMH will give you different voltage than NiZn and make sure lamp module is capable of that voltage.
    All bodies, tail caps and bezels are black hard anodized and no other color is available.
    First picture shows short and long version and second picture shows short version with loaded 4AA battery holder (NOT INCLUDED).
    Tail cap has more attractive milling similar to M6 and can accept either version B of these or McClicky.
    Switch boot is easy to operate with one hand and choice of black, orange or green GID
    Head and body are machined from one piece of high grade aluminum bar and has lots of fine and deep grooves to manage better heat dissipation which is more critical with extreme hot LEDs such as SST-50, SST-90, multiple XML or extreme hot WA1164
    Will take many different D36 lamp assemblies such as this, this, FM-D36 socket/reflector module or any other drop in D36 lamp/LED modules.
    I strongly suggest these for single 32700, 32650,26650 or FM-D36 socket/reflector+WA1164 module (1500 Lumens) for 8NiMH.
    It is possible to use 4S/2P battery holder (4.8V, 4000mAh) if your module can take this voltage.
    Also possible to use with higher voltage NiZN rechargeable but your module must be capable to work with this voltage
    D26 bodies are available here.
    Possibilities are endless.
    I use STT-90 drop in with 1x32650 and never seen such a light and such a long run from this small package. Thanks Dave.
    Advantages:
    Not only you will get long run time compare to 17mm or 18mm cells but brighter output because of less voltage sag, less stress to cells and less frequent recharge. Not to mention there are lots of voltage and power possibilities.
    Body thickness is about 42mm which is about 2mm fatter than original M*g D but tail cap has 45mm diameter, so chance of slipping out of hand is very little.
    Each body comes with one head o'ring, two tail side O'rings, one tail cap, one dust cover boot, one crenelated bezel, Borofloat lens and lens O'ring. No lamp assembly, and No batteries or battery holder included. McClicky switch is optional for additional of $14 installed or insert and tighten your switch inside tail cap.
    What you get is a complete host including body, tail cap, tail cap boot, bezel, lens and all needed o'rings. McClickie switch is not included but optional. Head and body is made of one piece (nonremoveable) high grade aluminum with lots of deep fins for better heat sinking.
    *These bodies are designed to take several different types of D36 modules but you may need to extract short spring of some modules.*
    Price:
    Black 1x32650 $89 (AVAILABLE)
    Black 8AA $99 (AVAILABLE)
    4 serial white battery holder (4.8 Volt) $38 (AVAILABLE)
    8 serial white battery holder (9.6 Volt) $40 (AVAILABLE)
    4S/2P black battery holder (4.8 Volt) $40 (AVAILABLE)

    HOTWIRE D36 socket/reflector with installed WA1164 $50 (NOT AVAILABLE)
    HOTWIRE D36 socket/reflector without bulb $41 (AVAILABLE)
    McClickie switch (with switch ring) $14 installed (AVAILABLE)with purchase of body.
    Extra boot (switch cover) $1 (AVAILABLE) with purchase of body. (Black, orange or GID)
    Shipping to States $6
    Internationaly $16
    Please add 4% to total for CC paypal fee.
    Insurance $2.60 for each $100 value in States
    Insurance $6.75 for each $100 value internationally
    I am not responsible for loss or damage once I ship your package.
    NO battery available or will be available.

    No reservation please. You must pay FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
    Please don't pay if you may change your mind. There will not be any refund.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
    Example:
    Mr Genefire for #65 1x32650 with black boot
    Paypal: fivemega@aol.com

    Please PM for postal money order payment.
    Any comment welcome.
    www.USPS.com

    ----------------------


    #01 1x32650 D36 $89 stoli67 paid shipped
    #02 1x32650 D36 $89 EvilLithiumMan paid shipped
    #03 1x32650 D36 $89 rcantor paid shipped
    #04 1x32650 D36 $89 rcantor paid shipped
    #05 1x32650 D36 $89 tadesko paid shipped
    #06 1x32650 D36 $89 (SOLD)
    #07 1x32650 D36 $89 (SOLD)
    #08 1x32650 D36 $89 (SOLD)
    #09 1x32650 D36 $89 (SOLD)
    #10 1x32650 D36 $89 (SOLD)
    #11 1x32650 D36 $89 (SOLD)
    #12 1x32650 D36 $89 (SOLD)
    #14 1x32650 D36 $89 (SOLD)
    #15 1x32650 D36 $89 VanIsleDSM‎ paid shipped LC548066818US
    #16 1x32650 D36 $89 teach9213 paid shipped LC548063754US
    #17 1x32650 D36 $89 xml paid shipped 03110240000019938676
    #18 1x32650 D36 $89 TB paid shipped 03110240000019938652
    #19 1x32650 D36 $89 donn paid shipped 23082940000001845989
    #20 1x32650 D36 $89 quazimoda 2 paid shipped 9505510518353220436380
    #21 1x32650 D36 $89 (AVAILABLE)
    #22 1x32650 D36 $89 (AVAILABLE)
    #23 1x32650 D36 $89 (AVAILABLE)
    #24 1x32650 D36 $89 (AVAILABLE)
    #25 1x32650 D36 $89 (AVAILABLE)
    #26 1x32650 D36 $89 (AVAILABLE)
    #27 1x32650 D36 $89 (AVAILABLE)
    #28 1x32650 D36 $89 (AVAILABLE)
    #29 1x32650 D36 $89 (AVAILABLE)
    #30 1x32650 D36 $89 (AVAILABLE)

    ---------------------

    #01 8AA D36 $99 rcantor paid shipped
    #02 8AA D36 $99 (SOLD)
    #03 8AA D36 $99 (SOLD)
    #04 8AA D36 $99 (AVAILABLE)
    #05 8AA D36 $99 (AVAILABLE)
    #06 8AA D36 $99 (AVAILABLE)
    #07 8AA D36 $99 (AVAILABLE)

    ---------------------
    Please find link of my other products here and click on each link you are interested on.
    ---------------------
    (A V A I L A B L E)
    Last edited by fivemega; 08-04-2014 at 12:55 AM.

  2. #2

    Default Re: 32650 D36 & 8AA D36

    I purchased a 1D unit during the "lost" period. Is there any chance you would make a 1 cell extender for these?

  3. #3

    Default Re: 32650 D36 & 8AA D36

    These are cool.

    cpl questions though



    answers found sorry!!! hehe
    Last edited by purelite; 03-19-2011 at 10:26 AM. Reason: answers found

  4. #4
    Flashaholic andyfrasier's Avatar
    Join Date
    Jan 2010
    Location
    Hong Kong, Hong Kong SAR
    Posts
    126

    Default Re: 32650 D36 & 8AA D36

    Hi, I'm really interested in the 8AA version.

    Do you know where I could source one of these:

    Quote Originally Posted by fivemega

    I strongly suggest these for single 32650,26650 or FM-D36 socket/reflector+WA1164 module (1500 Lumens) for 8NiMH.

  5. #5
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by andyfrasier View Post
    Hi, I'm really interested in the 8AA version.

    Do you know where I could source one of these:
    Do you mean 8AA to power up WA1164 ?
    If so, reflector/socket is available in post #1 of this thread and battery holder is available here.
    Same reflector/socket with WA1111 can be used with these 2x18650 bodies

  6. #6

    Default Re: 32650 D36 & 8AA D36

    Fivemega, do you think (4) 14500's would fit in your adapter? They measure out at 52mm long.

  7. #7
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by luopo View Post
    Fivemega, do you think (4) 14500's would fit in your adapter? They measure out at 52mm long.
    Yes,

    4 AW's protected 14500 will fit in 4AA adapter and inside barrel of above 4AA body with total nominal voltage of 14.8 volt.

  8. #8
    Flashaholic Epsilon's Avatar
    Join Date
    Sep 2010
    Location
    Netherlands
    Posts
    399

    Default Re: 32650 D36 & 8AA D36

    What are the lengths of both lights (from bezel including tailcap)? Interested, but now have to decide in which one .

    The 3x 17670 adapter does not fit in the 8x AA host i presume? Widthwise I mean?

  9. #9
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by Epsilon View Post
    What are the lengths of both lights (from bezel including tailcap)? Interested, but now have to decide in which one .

    The 3x 17670 adapter does not fit in the 8x AA host i presume? Widthwise I mean?
    Short one (1x32650) is about 160mm and longer one (8AA) is about 210mm including switch boot.

    A loaded
    3x17670 battery holder will not fit.

  10. #10
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: 32650 D36 & 8AA D36

    Just got one of these lights and love it.
    I need a black switch boot how can I oder one ?

    cheers
    WTB: Surefire -6, Z44 Bezels with logo’s ? Any logo, early Z44 bezel's new condition Blk or HA,and anything rare Surefire

  11. #11
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by Rat View Post
    Just got one of these lights and love it.
    I need a black switch boot how can I oder one ?

    cheers
    Please PM me your address.

  12. #12
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by fivemega View Post
    Please PM me your address.
    Sweet PM sent great service.

    cheers
    WTB: Surefire -6, Z44 Bezels with logo’s ? Any logo, early Z44 bezel's new condition Blk or HA,and anything rare Surefire

  13. #13
    Enlightened
    Join Date
    Aug 2011
    Location
    TAIWAN (R.O.C)
    Posts
    48

    Default Re: 32650 D36 & 8AA D36

    Hi sir,
    PayPal and PM sent.

    Wang

  14. #14

    Default Re: 32650 D36 & 8AA D36

    CPF Handle: xml

    Paypal sent for:

    #17 1x32650 D36 $89.00
    Mcclicky Switch INSTALLED $14.00
    (2) Extra BLACK Switch Boots $2.00
    Insurance ($100 Value) $2.60
    Shipping to States $6.00
    SUBTOTAL $113.60
    CC Fees (4%) $4.54

    GRAND TOTAL $118.14

    Thanks a bunch!

  15. #15
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: 32650 D36 & 8AA D36

    Got the boots thank you very much.
    Sending me two boots free of charge show's all of us what type of seller you are. Just outstanding service.
    Love this host.
    thanks
    WTB: Surefire -6, Z44 Bezels with logo’s ? Any logo, early Z44 bezel's new condition Blk or HA,and anything rare Surefire

  16. #16
    Flashaholic*
    Join Date
    Feb 2008
    Location
    Golden Poppy State
    Posts
    1,236

    Default Re: 32650 D36 & 8AA D36

    I need one of these.

    4S/2P black battery holder (4.8 Volt) $40

    Unique Transaction ID # 2RH51202CL548830E




    Thank you Varooj and happy holidays to you and your's,
    Frank



    .

  17. #17
    *Flashaholic*
    Join Date
    Oct 2007
    Location
    Great South Bay, LINY
    Posts
    8,051

    Default Re: 32650 D36 & 8AA D36

    I don't know how I missed this thread!

    for 1x32650 D36 host with McClicky installed.


  18. #18
    Flashaholic*
    Join Date
    Feb 2008
    Location
    Golden Poppy State
    Posts
    1,236

    Default Re: 32650 D36 & 8AA D36

    Hello FM,
    I received my black 8AA battery holder Friday. It works great. It did not have the brass plug on the end. Will you please send me one; if this is an additional cost please just let me know.
    Thank you,
    Frank



    .

  19. #19
    Flashaholic Kif's Avatar
    Join Date
    Aug 2005
    Location
    Mississippi
    Posts
    200

    Default Re: 32650 D36 & 8AA D36

    Please advise which way should I put in the battery holder? A or B (which side is positive of the holder)?
    Thanks



  20. #20
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Charging port is at tail side.

    Black plastic pressed in knured brass nut is Positive and at module side.

    Make sure brass plug is inserted in charging port.
    Last edited by fivemega; 01-25-2013 at 02:29 PM. Reason: kif's picture removed

  21. #21
    Flashaholic
    Join Date
    Sep 2009
    Location
    Indonesia
    Posts
    242

    Default Re: 32650 D36 & 8AA D36

    Wkwkwkw... Also happen to me. I thought something's wrong with the drop-in. Even until now I still have a hard time to remember the correct position if I hadn't put big minus sign in red on the brass part that's sticking out at the bottom.
    Quote Originally Posted by Kif View Post
    Please advise which way should I put in the battery holder? A or B (which side is positive of the holder)?
    Thanks

  22. #22

    Default Re: 32650 D36 & 8AA D36

    I'm confused between the two four-cell battery holders. Both are shown as 4.8v, I assume with 4 Eneloops. What is the difference?
    My lights: I've given up on keeping my light list updated!

  23. #23

    Default Re: 32650 D36 & 8AA D36

    CPF handle: xml
    Paypal sent for:
    (1) 4AA serial white adapter
    Shipping and ins
    30% off
    Total $34.80

    THANKS!!!

    Paypal'd another $1.40 (I had the wrong price)

  24. #24
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by bonvivantmike View Post
    I'm confused between the two four-cell battery holders. Both are shown as 4.8v, I assume with 4 Eneloops. What is the difference?
    You may want to check here.
    Assuming each Eneloop is 1.2 Volt, 2000mAh
    White 4AA holder will give you 4.8 Volt @ 2000mAh (4 serial)
    Black 8AA holder will give you 4.8 Volt @4000mAh (4 serial / 2 parallel)
    White 8AA holder will give you 9.6 Volt @ 2000mAh (8 serial)

    So there is only one type of 4 cell battery holder.

  25. #25
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    More 32650 D36 & 8AA D36 available.

  26. #26

    Default Re: 32650 D36 & 8AA D36

    CPF handle: quazimoda 2
    Paypal sent for:
    Black 1x32650 $89, 4 serial white battery holder (4.8 Volt) $38, Shipping to States $6, 4% to total for CC paypal free $3, total $136


    THANKS!!!

  27. #27

    Default

    FM, is the d36 G4 socket and reflector combination available for purchase without the light itself? Thanks!

  28. #28
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,515

    Default Re: 32650 D36 & 8AA D36

    Quote Originally Posted by darkknightlight View Post
    FM, is the d36 G4 socket and reflector combination available for purchase without the light itself? Thanks!
    Yes, you can purchase D36 socket/reflector without flashlight.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •