3300L Sales thread

[cmacclel]

Mac,
If this drop in fits a 2D host is there any reason why I can't use two 32650's?

Any battery's that fit into a stock 2d tube that are 7.2v up to 9.6v will work as long as they can handle the 4.5a current draw on high.

Mac

[doctor ladd]

I ordered my drop-in on March 6th from your website, I am getting anxious about this.
I hope you weren't affected by the tornadoes.

[mitro]

I was told on 5/9 that mine would be ready to ship "this week". On 5/18 I was told essentially the same thing. It's June 5th and I'm empty-handed. Over 3 months have gone by since I ordered a light that was supposed to be ready in four weeks. And I've still never seen a word on why there's been any delay.

I'm just not cut out for this custom light stuff, I guess.

[cmacclel]

I was told on 5/9 that mine would be ready to ship "this week". On 5/18 I was told essentially the same thing. It's June 5th and I'm empty-handed. Over 3 months have gone by since I ordered a light that was supposed to be ready in four weeks. And I've still never seen a word on why there's been any delay.

I'm just not cut out for this custom light stuff, I guess.

I apologize for the delay. The delay is 100% my fault as my estimation on completing projects was apparently way off and last month I had bunch of family related issues come up that further delayed things. If you do not want to waite any longer please PM me and I would be happy to issue you a refund.


Mac

[Colonel Sanders]

Hey Mac, PM sent.

[Colonel Sanders]

Do you think there will be an XM-L version of this light and if so, how many would it use?

[doctor ladd]

I will continue to wait as long as it's coming.

Still very excited for this!

[mvyrmnd]

I apologize for the delay. The delay is 100% my fault as my estimation on completing projects was apparently way off and last month I had bunch of family related issues come up that further delayed things. If you do not want to waite any longer please PM me and I would be happy to issue you a refund.


Mac

How does that affect my 8 week quote? I would dearly love to have mine for an upcoming meetup. Are you waiting to send my Tri-EDC along with the 3300L?

[cmacclel]

How does that affect my 8 week quote? I would dearly love to have mine for an upcoming meetup. Are you waiting to send my Tri-EDC along with the 3300L?

Your custom ordered modules are in the mail and I should see them this week hopefully.Your quote is accurate. I was going to send the repaired Tri-EDC with the 3300L. If you want I can send the repaired Tri-EDC tomorrow. Please take this to PM or E-Mail.


Thanks Mac

[warmurf]

Hi Mac,

Are you able to give us a revised ETA- rubbery, not expecting an exact date, just a revised estimate of how far away they might be- just helps with the expectation thing- I for one understand these things take time and when ordering cutting edge customs timelines are flexable, I just like to have an idea. No pressure.

[cmacclel]

Hi Mac,

Are you able to give us a revised ETA- rubbery, not expecting an exact date, just a revised estimate of how far away they might be- just helps with the expectation thing- I for one understand these things take time and when ordering cutting edge customs timelines are flexable, I just like to have an idea. No pressure.

I have all the custom modules in house and should have the 3300L's that remain completed this week.

Thanks Mac

[Colonel Sanders]

Is that including all of the 4500k and 1550 board lights?

[cmacclel]

Is that including all of the 4500k and 1550 board lights?

I do not have any 1550ma 4500k boards. I purchased a couple sets of the 6500k 1550's on my last order.

Mac

[mvyrmnd]

It's a shame there's no emoticon for jumping up and down like an excited 2 year old!

[Colonel Sanders]

I will wait for the 4500k 1550s. Any idea how long on those?

[Colonel Sanders]

BTW, Mac, your message box is full.

[cmacclel]

Any battery's that fit into a stock 2d tube that are 7.2v up to 9.6v will work as long as they can handle the 4.5a current draw on high.

Mac

Let me re-phase this comment. The standard 3300L was designed for the Batteryspace/Lighthound 26650 cells. If you choose to use different cells that are shorter a spacer may be needed.

My comment above was referring to current draw not physical length or diameter of cells.

Mac

[warmurf]

Can't wait!! Mac, is there any chance you could try and get an actual OTF lumens reading off of the 1550 version? I note you did one for the 1100 version. It would be real interesting to see what this format puts out....!??

[PaulEZ]

Hey Mac - I shot you an email, but found your thread here so I figured this would be a better place to reach you.

I'm looking for: Complete Mag 3300L, using 1550mA 90-CRI boards set up for 2x26650 cells.

Please contact me with regards to customizing/pricing

Thanks!

[mvyrmnd]

I have all the custom modules in house and should have the 3300L's that remain completed this week.

Thanks Mac

Any further news, Mac?

[warmurf]

Any further news, Mac?

+1!!

[cmacclel]

Guys Almost all the 3300L's have been shipped I only have a few left to ship. I had a issue with the last batch of heatsinks which required me to make new ones. All 3300L orders will be completed very shortly. Also the 3300L and Mag Drop-ins will most likely be discountinued after these orders are filled.

Thanks Mac

[flashflood]

Guys Almost all the 3300L's have been shipped I only have a few left to ship. I had a issue with the last batch of heatsinks which required me to make new ones. All 3300L orders will be completed very shortly. Also the 3300L and Mag Drop-ins will most likely be discountinued after these orders are filled.

Thanks Mac

What, if anything, will be replacing them?

[cmacclel]

What, if anything, will be replacing them?

Nothing will be replacing them at this time.

Mac

[doctor ladd]

Just got word that my 3300L was delivered Mac, I can't wait until it gets dark!

I'm glad I have both of your custom drop-ins now, I don't think anyone makes a similar product in build or heatsinking quality, they will be Extra rare now!

[doctor ladd]

Wow, It is more impressive than I had imagined!

One question though, I see a red LED on one board, the board is different from the other two so I assume its just how that board works.
Otherwise nothing else is peculiar, Stellar work!

red_led by laddscott, on Flickr

Glorious!

Mac's 3300L (2) by laddscott, on Flickr

[chipwillis]

Nice can't wait for mine.

[cmacclel]

The board with the red LED is the master the other 2 are slaves.

Mac

[doctor ladd]

The board with the red LED is the master the other 2 are slaves.

Mac

I noticed it blinks when it starts up so I figured it was something along those lines.
I love the soft start too!

[nfetterly]

Email sent for one (Hi CRI) - planning to pay by check (when I get address)....