******** H22A Heatsinks ********

[waverider81]

for:

2 x P7 Flat Top "D" for 22$

thanks
Kai

[ljw2k]

I will take 3x Heatsinks to fit D Maglite and the XML LED would that be the P7 flatop version above or do you make one just to fit the XML i'm a little confused what i need sorry .
I would like registered Post also please post to UK is that $30 Dollars Inc ?

[H22A]

I will take 3x Heatsinks to fit D Maglite and the XML LED would that be the P7 flatop version above or do you make one just to fit the XML i'm a little confused what i need sorry .
I would like registered Post also please post to UK is that $30 Dollars Inc ?

Is XM-L mounted on PCB board or bare emitter? If you want flexibility to play around with PCB or just bare emitter, I would suggest P7 flattop. Price is $30.00 including registered mail.

[ljw2k]

for:

3x P7 Flat Top "D" for 28$
registered Mail $2

Toatal 30$

Many Thanks ljw2k

Payment Sent (Unique Transaction ID #9TB30561GP112313P)

[Sway]

Paypal sent for 1C and 1D P7 flat top, registered.

Thanks
Kelly

[H22A]

Shipped.

- Jordan D.
- ljw2k
- Firecop
- waverider81

Thanks,
Setapong

Next Shipment Apr 25
-

[H22A]

Paypal sent for 1C and 1D P7 flat top, registered.

Thanks
Kelly

Hi Kelly,

I'm sorry you did not make this week shipment. Your order will be shipped on Apr 25.

Thanks,
Setapong

[SUNNJIM]

Hi, got my shipment for NARA K. the heatsinks fit very well.

thanks.

[Bartol]

for:

2 x P7 Flat Top "C" for 22$

Thanks!

Bartol

[ljw2k]

Can i just say a big thankyou to Setapong for the super fast delivery and kept me informed all the way.

The Heatsinks are Awsome mate and fit perfect in every way and anyone thinking of buying from Setapong won't be dissapointed in the quality of the heatsinks and the price and not forgetting his great customer service A+++ from me mate many thanks.

[ssvqwnp]

Paypal sent for:

2 x Bare P7 Flat-Top D
1 x Bare P7 Flat-Top C
+ Registered Mail

Total = $30


Thanks!

[H22A]

Can i just say a big thankyou to Setapong for the super fast delivery and kept me informed all the way.

The Heatsinks are Awsome mate and fit perfect in every way and anyone thinking of buying from Setapong won't be dissapointed in the quality of the heatsinks and the price and not forgetting his great customer service A+++ from me mate many thanks.

I'm glad you like it and thank you for your kind words.

[H22A]

Shipped.

- Bartol
- Sway
- ssvqwnp

Thanks,
Setapong

Next Shipment May 3

[swrdply400mrelay]

Any plans on making D sized heat sinks with a completely flat top to accommodate 3 LEDs + optics?

[Nos]

Do those flat top heatsink fokus well in a deep mag reflector, or can you offer some deeper heatsinks H22A?

[Epsilon]

3 DHS and P7 Flat Top Bare Aluminum "D" size - $28.00 for 3
+ 2.00 registered shipping
Total $30

[H22A]

Any plans on making D sized heat sinks with a completely flat top to accommodate 3 LEDs + optics?

I have no plan at the moment, but future is uncertain. In addition, I think Modamag used to offer multi LED set up. You might what to check with him.

[H22A]

Do those flat top heatsink fokus well in a deep mag reflector, or can you offer some deeper heatsinks H22A?

How deep do you want? What is the set up are you plan on using?

[jabe1]

I think a sink with no retaining lip will work for Nos. I plan on grinding mine off, and tapping a couple of holes to enable depth adjustment.

[jabe1]

Paypal sent for 1 of each C and D flat top P7.
Thanks!

[Adenin]

1x DHS Flat Top Bare Aluminum "D" size
2x P7 Flat Top Bare Aluminum "D" size
registred mail

[iq2k]

Ok, after about 15 years of ownining a mag charger I have purchased my first other maglites, 3x 2D mags to mod which are totaly different to the charger (other than the Orings.)
to get to the point, I want 2 ali heatsink for xml on a 12mm board and 1 for a sst-90 with no board, so which should I consider please?
also how do I fix and adjust the heatsink for focusing and stability?

The last thing remaining to say is thanks.

[StefanFS]

Hello S,

3 x DHS Flat Top "C" please.

Thank you,

Stefan

[H22A]

Ok, after about 15 years of ownining a mag charger I have purchased my first other maglites, 3x 2D mags to mod which are totaly different to the charger (other than the Orings.)
to get to the point, I want 2 ali heatsink for xml on a 12mm board and 1 for a sst-90 with no board, so which should I consider please?
also how do I fix and adjust the heatsink for focusing and stability?

The last thing remaining to say is thanks.

For XM-L on PCB board I recommend P7 heatsink. However, I do not have heat sink for SST Led. To focus you simply turned the flashlight head until you see circular hot spot.

[H22A]

Shipped.

- Jabe1
- EPsilon

Thanks,
Setapong

Next Shipment May 9

[Tomppa]

2 x P7 Flat Top Bare Aluminum D

Shipping: Registered mail

Total = 2 x P7 flat top bare heatsinks (US$22.00) + registered mail (US$2.00) = US$24

PayPal send

Tomppa
Thanks!

[vestureofblood]

Payment for flat top heat sinks for use with XML and registered mail.

2x Mag C flat top sinks
2x Mag D flat top sinks

Thanks again for offering these at such a fair price

[dfwcaver]

3x P7 Flat Top "D" for $28
registered Mail $2
+4%
Total $31.20

Thanks!!

[kkara4]

@H22A:

1) I have both bare and 20mm PCB mounted Cree XM-L and am after heatsinks. Which do you recommend?
2) Are your bare aluminium ones the largest size that can possibly fit into a D maglite (because i want maximum amount of metal for maximum heat dissipation)? I mean is the maximum depth utilised (does it touch the switch and on the other end the reflector?
3) Are your sinks suitable for use with both standard incandescent mag and LED mag (with deep reflector)?
4) Is the bottom recessed for a driver (need to fit a 1.3 inch h6flex driver)...if you could post pictures of undersides of your heatsinks that would be great

Thanks for your help

EDIT: 1) I have now ordered additional XM-L on 14mm PCB so will use your P7 sinks as per your previous recommendations if I decide to order; this decision i will make based on feedback to Q2,3,4 i wrote above.

Thanks!

[H22A]

1. All my hetsinks will not work with 20mm PCB. The pedestal is only 15mm wide.
2. Bottom of the heatsink does not touch the switch. You still have some room to work with.
3. I'm sorry I have never play with Mag LED. May be other members with such experience could help me with this one.
4. On P7 heatsinks the bottom is solid with no recess. If you plan on using XM-L on PCB I recommend P7 flat top, but I think 1.3" driver is too big.

Here is the picture of the bottom

@H22A:

1) I have both bare and 20mm PCB mounted Cree XM-L and am after heatsinks. Which do you recommend?
2) Are your bare aluminium ones the largest size that can possibly fit into a D maglite (because i want maximum amount of metal for maximum heat dissipation)? I mean is the maximum depth utilised (does it touch the switch and on the other end the reflector?
3) Are your sinks suitable for use with both standard incandescent mag and LED mag (with deep reflector)?
4) Is the bottom recessed for a driver (need to fit a 1.3 inch h6flex driver)...if you could post pictures of undersides of your heatsinks that would be great

Thanks for your help

EDIT: 1) I have now ordered additional XM-L on 14mm PCB so will use your P7 sinks as per your previous recommendations if I decide to order; this decision i will make based on feedback to Q2,3,4 i wrote above.

Thanks!