SunwayLED
Page 1 of 6 123456 LastLast
Results 1 to 30 of 168

Thread: Quad XP-G 5.6A 3-mode P60 module 7th Run *close*

  1. #1

    Talking Quad XP-G 5.6A 3-mode P60 module 7th Run

    I sell this!



    A new product!

    5.6A 3-mode 3.7V Li-Io battery!
    This module is most suitable for a large-capacity battery!

    A small battery of the capacity.
    When it is the low battery of the electric discharge rate, the module cannot output it.

    The 6th run will be limited to 4.2mA 3-mode 5.6A 3-mode Direct Drive XP-G R4NW & R5CW & 90CRI

    Black or polishing finish is available.

    The sale number is 10 in all.

    I begin to sell it for $190(4.2A 3-mode) 200(5.6A 3-mode) including the EMS postage!

    The GITD(Ultra green/Ultra blue/Pure blue)processing is plus $10.

    This becomes very hot.
    The use battery is with 3.7V Li-Io battery protection circuit.
    If a light becomes hot, please cut the light which is in a dangerous state.
    Please be careful to the handling.
    After understanding, please refer as things mentioned above.

    This light creates excessive heat
    The consecutive lighting is dangerous.
    If a light is overheated, please turn off the light.
    This light may cause eye damage
    This light will burn the skin at close range.
    This light may cause combustibles to ignite


    I sell this custom Quad XP-G P60 module.

    I begin to sell it for $190(4.2A 3-mode) $200(5.6A 3-mode)including the EMS postage!

    This light creates excessive heat.
    Please use 26650 or 26500 or 18650 or 17670 expensive battery of the electric discharge performance.

    The payment is PeyPal.
    Post your order here and I will PM you the total along with my PayPal address.

    Cutter-XPG25RDR5-CW (remodeling board)


    Original board


    Carclo 24mm Quad Optics


    Quad XP-G Module 5600mA 3-mode
    *3 modes: Low-Med-High
    * Voltage input: 3V - 5.5V
    * The memory feature will memorize the last mode

    Quad XP-G Module 4200mA 3-mode
    *3 modes: Low-Med-High
    * Voltage input: 3V - 5.5V
    * The memory feature will memorize the last mode




    surefire 6P C2 normal body FIVEMEGA 26500 & Cryos Cooling Bezel


    Last edited by kerberos0023; 11-03-2011 at 09:53 PM.

  2. #2

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    5.6A 3-mode
    1) Rat R5 3-mode 5.6A Black Pure blue GITD *Order Shipped*
    2) Chrisdm R5 3-mode 5.6A Black Green GITD *Order Shipped*
    3) WarriorOfLight R5 3-mode 5.6A Black Green GITD with 10621 *Order Shipped*
    4) badtziscool R4 5.6A 3-mode Silver Pure blue GITD *Order Shipped*
    5) drmalenko R5 3-mode 5.6A Black Pure blue GITD *Order Shipped*
    6) WarriorOfLight 90CRI 3-mode 5.6A Silver Green GITD with 10621 *Order Shipped*
    7) supersuby R5 3-mode 5.6A Black Pure blue GITD *Order Shipped*
    8) grayhighh 90CRI 3-mode 5.6A Black Pure blue GITD *Order Shipped*
    9) flashmenow R5 3-mode 5.6A Black Green GITD *Order Shipped*
    10) azzid R4 3-mode 5.6A Black Green GITD *Order Shipped*
    11) jiuong R5 3-mode 5.6A Black Pure blue GITD with 10621 *Order Shipped*
    12) Drywolf R5 3-mode 5.6A Black Green GITD *Order Shipped*
    13) Goldy R5 3-mode 5.6A Black Green GITD *Order Shipped*
    14) Sanderman 90CRI 3-mode 5.6A Black Green GITD *Order Shipped*
    15) Sanderman 90CRI 3-mode 5.6A Silver Pure blue GITD *Order Shipped*
    16) rgbgum R4 3-mode 5.6A Silver Ultra blue GITD *Order Shipped*
    17)
    ledplumber R4 3-mode 5.6A Silver Ultra blue GITD *Order Shipped*
    18) mohanjude R5 3-mode 5.6A Silver *Order Shipped*
    19) yifu S2 3-mode 5.6A Silver *Order Shipped*
    20)
    Stress S2 3-mode 5.6A Silver *Order Shipped*
    21) genius5th XT-E 3-mode 5.6A Silver *Order Shipped*


    5.6A 2-mode
    1) chesterqw R5 2-mode 5.6A Black *Order Shipped*


    5.6A 1-mode
    1) genius5th R5 1-mode 5.6A Black Green GITD *Order Shipped*

    4.2A 3-mode
    1) kengostar 90CRI 4.2A 3-mode *Order Shipped*
    2) mfredom 90CRI 4.2A 3-mode *Order Shipped*
    3) a.kouchi 90CRI 4.2A 3-mode silver Pure blue GITD *Order Shipped*
    4) PoliceScannerMan 90CRI 4.2A 3-mode Black Pure blue GITD *Order Shipped*
    5) azzid 90CRI 3-mode 4.2A silver with 10621 *Order Shipped*

    2.8A 3-mode
    1) azzid nichia119 3-mode 2.8A silver Green GITD with 10621 *Order Shipped*
    2) fabienne nichia119 3-mode 2.8A silver *Order Shipped*
    Last edited by kerberos0023; 05-22-2012 at 04:15 AM.

  3. #3

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Are both versions direct drive?

  4. #4
    Flashaholic*
    Join Date
    Mar 2011
    Location
    NBD
    Posts
    564

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Comment deleted.
    Last edited by xed888; 05-11-2011 at 01:39 AM.

  5. #5

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Both are direct drive. I note above that the drop-in has been mated with an FM 26mm host. There are few options for these except for the IMR 26650. Has anyone run the 5.6A DD in this host with an IMR?

  6. #6

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Thanks for the clarifications.
    Last edited by swrdply400mrelay; 05-11-2011 at 12:45 AM.

  7. #7
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    I will get this 7th run started this is Number 3 Kenji Quad for me they are good very good If you have not got one and are thinking about getting a drop in you will love these.

    Kenji my new order
    I would like 10621 Carclo optics again please.
    Quad XP-G 5.6A 3-mode P60 module with XP-G R5 Cool white with Pure blue GITD Black.

    cheers

    Edit: Sweet now I have all three colours
    Last edited by Rat; 05-12-2011 at 05:41 AM.

  8. #8

    Talking Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by Rat View Post
    I will get this 7th run started this is Number 3 Kenji Quad for me they are good very good If you have not got one and are thinking about getting a drop in you will love these.

    Kenji my new order
    I would like 10621 Carclo optics again please.
    Quad XP-G 5.6A 3-mode P60 module with XP-G R5 Cool white with Pure blue GITD Black.

    cheers

    Edit: Sweet now I have all three colours
    Hi Rat,

    Thank you for your repeat orders.
    I received payment!

    I received order of Quad XP-G 5.6A 3-mode R5 CW Pure blue GITD Black 10621 Carclo optics !

    Thanks,
    Kenji
    Last edited by kerberos0023; 05-12-2011 at 02:26 PM.

  9. #9
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by kerberos0023 View Post
    Hi Rat,

    Thank you for your repeat orders.
    I received payment!

    I received order of Quad XP-G 5.6A 3-mode R5 CW Pure blue GITD Black 10621 Carclo optics !

    Thanks,
    Kenji

    No thank you for such a great drop in


  10. #10
    Enlightened mustang90's Avatar
    Join Date
    Sep 2008
    Location
    Bluegrass
    Posts
    82

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    I think I gotta have one! What is the max lumen output of the 5.6a? What Surefire hosts will this fit without mods?

  11. #11

    Ohgeez Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by mustang90 View Post
    I think I gotta have one! What is the max lumen output of the 5.6a? What Surefire hosts will this fit without mods?
    Hi mustang90,

    I'm sorry.
    Because there is not a measure of lumen, I do not understand it.

    But you will be satisfied!

    Thanks,
    Kenji

  12. #12

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    I'm sure I've seen a thread where one of these was measured at just over 1400 OTF at start-up droping down to 1200+. Either way they are shockingly bright! Was out tonight visiting family and we had popped up the road to order some takeaway Chinese. Was waiting a while in the carpark and got board, so I whipped out the 5.6A Quad from Kenji here (powered with a 18650 IMR) to see how it would light up some trees across the 4 lane road we were parked near. Some people nearby also waiting stopped talking and came over rather shocked at what I had just done- wanted to see "that thing". Was kind of embarassing but it reminds me that people don't get to see lights like these- they don't know they exist. So get one- you will not regret it!!!

  13. #13
    Flashaholic Nokoff's Avatar
    Join Date
    Apr 2010
    Location
    US
    Posts
    167

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Is the next run going to include regulated modules?
    made in china...

  14. #14

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by Nokoff View Post
    Is the next run going to include regulated modules?
    Hi,

    I make regulated modules.

    Thanks.

  15. #15
    Flashaholic Nokoff's Avatar
    Join Date
    Apr 2010
    Location
    US
    Posts
    167

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    I know you can make regulated, though I thought this run was 10 only direct drive only per your first post. Sorry I'm sure the confusion is on my end. ty

    Quote Originally Posted by kerberos0023 View Post
    The 6th run will be limited to 4.2mA 3-mode 5.6A 3-mode Direct Drive XP-G R4NW & R5CW & 90CRI

    The sale number is 10 in all.
    made in china...

  16. #16

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    I would like a 5.6a regulated quad with green GITD please.

  17. #17

    Wink2 Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by Chrisdm View Post
    I would like a 5.6a regulated quad with green GITD please.
    Hi Chrisdm,

    I received payment!

    Thanks,
    Kenji
    Last edited by kerberos0023; 05-16-2011 at 03:17 AM.

  18. #18

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Stoked, mine is on its way... Still a question about batteries though, for Kenji or anyone willing to help... I plan to run this regulated 5.6a quad on a single 18650 battery. I have a bunch of AW, Redilast etc hi capacity protected ones... Would I get more power with 18650 IMR's, and would I also suffer shorter runtimes with IMRs? Thanks,

  19. #19

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Being regulated your best sticking with the protected battery, as you'll get little extra out of the LEDs with the IMR. You'll find the IMR may give a slight higher brightness for the first 30 secs or so but will then drop down to the equivilant of a protected battery, however it's run time will be much less with the IMR being only 1600 mAh as against the protected batteries with higher value.

  20. #20

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by warmurf View Post
    Being regulated your best sticking with the protected battery, as you'll get little extra out of the LEDs with the IMR. You'll find the IMR may give a slight higher brightness for the first 30 secs or so but will then drop down to the equivilant of a protected battery, however it's run time will be much less with the IMR being only 1600 mAh as against the protected batteries with higher value.
    Thanks, very much appreciate the info and education.. And as I'm beginning to understand if they were direct drive the IMRs would be much brighter?

  21. #21

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Yes, can be up to a couple of hundred lumens higher, but it doesn't last as the battery begins to sag. I have a direct drive version and I can see quite a difference within the first 30 seconds with the IMR being noticably brighter, and get hotter fast. But if I'm going to take the light along for a walk I'll take it out with a protected cell for the longer run time and heat management.

  22. #22
    Flashaholic doctor ladd's Avatar
    Join Date
    Jan 2008
    Location
    Massachusetts
    Posts
    121

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by Chrisdm View Post
    Thanks, very much appreciate the info and education.. And as I'm beginning to understand if they were direct drive the IMRs would be much brighter?
    Chrisdm, please read the descriptions on this page about 18650 battery types and amp draw.
    The first type (Lithium Cobalt) is the typical 18650 I think you have many of.
    The second type (Lithium Manganese) is IMR.
    http://batteryuniversity.com/learn/a...of_lithium_ion

    To me the real benefit of the IMR is safety. I have a few always charged so I can have a fresh one when I need it.
    Last edited by doctor ladd; 05-15-2011 at 10:30 PM.

  23. #23
    Flashaholic doctor ladd's Avatar
    Join Date
    Jan 2008
    Location
    Massachusetts
    Posts
    121

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    double post

  24. #24

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run

    Quote Originally Posted by doctor ladd View Post
    Chrisdm, please read the descriptions on this page about 18650 battery types and amp draw.
    The first type (Lithium Cobalt) is the typical 18650 I think you have many of.
    The second type (Lithium Manganese) is IMR.
    http://batteryuniversity.com/learn/a...of_lithium_ion

    To me the real benefit of the IMR is safety. I have a few always charged so I can have a fresh one when I need it.
    If you had seen my grades in chemistry you would have known better than to share that link with me... Just kidding! (Sort-of.. ) I appreciate the info, I will try to comprehend a fraction of it.

  25. #25
    Flashaholic* Rat's Avatar
    Join Date
    Oct 2010
    Location
    Australia
    Posts
    873

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run *open*

    Thanks Kenji The quad turned up today fast service again with your usual outstanding quality.

    Now all I need is a host for it

    cheers

    EDIT: Pure blue is now my favorite GITD
    Last edited by Rat; 05-17-2011 at 10:56 AM.

  26. #26

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run *open*

    Quote Originally Posted by Rat View Post
    Thanks Kenji The quad turned up today fast service again with your usual outstanding quality.

    Now all I need is a host for it

    cheers
    Cool! Thanks.

    Kenji

  27. #27
    Flashaholic* Eric242's Avatar
    Join Date
    Jul 2006
    Location
    [-Mad in Germany-]
    Posts
    1,506

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run *open*

    I´m about to get one of the 5.6A modules. Im just no quite sure if I should get a direct drive or regulated dropin? Since they are both driven @ 5.6A I assume they share the same brightness? (apart from the fact that the regulated dropin keeps the brightness level longer than the DD unit and the fact that the DD one is initially brighter when IRM cells are used).

    Thanks
    Eric

  28. #28

    Default

    I'm surprised to read this. If amps are regulated then at 5.6 amps imr should actually give more runtime not less. If dd imr will give more amps thus run out of power faster. 2900mah li ions do only provide that much runtime at around one amp. At high amperage they actually have less mah than 2200 mah li ions or 1600 mah imr.

    Anyway, I digress...from those of you who own a similar quad could you tell me how long you can run it on 18650 sized battery before the head or battery gets too hot to continue ?

  29. #29
    Flashaholic doctor ladd's Avatar
    Join Date
    Jan 2008
    Location
    Massachusetts
    Posts
    121

    Default

    Quote Originally Posted by recDNA View Post
    I'm surprised to read this. If amps are regulated then at 5.6 amps imr should actually give more runtime not less. If dd imr will give more amps thus run out of power faster. 2900mah li ions do only provide that much runtime at around one amp. At high amperage they actually have less mah than 2200 mah li ions or 1600 mah imr.

    Anyway, I digress...from those of you who own a similar quad could you tell me how long you can run it on 18650 sized battery before the head or battery gets too hot to continue ?
    Yes the 5.6 Should run longer since the xp-g's can handle more current and will pull a little more when direct driving.

    The head gets hotter than I like at about 2 minutes. It runs for a total of maybe 20 on high. The head always gets hot before the IMR, I don't even worry about battery temps as long as I pay attention to the head.

    Edit:
    I had to go back and test this after thinking about it today. 2 minutes on high was all it took to get hotttt!(5.6a) I originally said 4, and I think you could go past 2 but I didn't want to hold it any longer. Maybe in the winter its a different story but it's been 60-70 degrees here and 2 min was all I wanted to do. Hope that helps
    Last edited by doctor ladd; 05-22-2011 at 08:18 PM.

  30. #30

    Default Re: Quad XP-G 5.6A 3-mode P60 module 7th Run *open*

    If I hand my time again I would have probably got a regulated version, just so I could use it in a FM 26650 host with the larger battery capacity (4000mAh). I've got a Cyros bezel on mine so I can run it at full bore for about up to 10 minutes if using hand regulation as well. There is quite a noticable difference in start-up on an IMR however that drops within a couple of minutes. I often run mine with a protected cell just for the peace of mind. Only use good quailty cells with this light. I've found even red and blacks play up in it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •