precisionworks
Flashaholic
SureFire® boring & machining services
I can bore, ream & hone your Fury/6P/C2/M2/C3/M3/U2/M4 (and most other models) to accept the AW18650 or similar diameter 18mm cell. The smaller tube L1/A2/E-series can be bored for either a 17mm protected cell or for a standard size 18mm cell (like the AW2900 mAh or AW3100 mAh) but they cannot be bored for the much larger 3400 mAh cell. PM's are disabled so please click on the "contact" page at www.PrecisionWorks
PLEASE NOTE: This is the original thread started in May 2011. Some services that were offered before are no longer available (trit slot milling, bead blasting, etc.). Please refer to the current thread for up to date info on boring: http://www.candlepowerforums.com/vb...fire%AE-and-other-aluminum-or-titanium-lights
Please refer to the separate thread for info on mechanical mods: http://www.candlepowerforums.com/vb/showthread.php?335085-Mechanical-Modding-Services
NOTE #1: most machining mods don't require the entire light. Please ship only the parts to be machined. Removal of the clip, O-rings, combat rings, etc. is greatly appreciated.
Please note ... you now have two options for speed of turnaround:
1) I now offer 2-week turnaround for twice the delivered price I've always charged (i.e. $100 for a 6P, $120 for an E1 or E2, etc.)
2) Or indefinite turnaround for one-half the price of 2-week service (i.e. $50 for a 6P, $60 for an E1 or E2, etc,). Indefinite really means just that, I will not give a time frame or quote a date/month/etc. if you choose this option.
® SUREFIRE is a registered trademark of SureFire, LLC, 18300 Mount Baldy Circle, Fountain Valley, CA 92708 USA
I can bore, ream & hone your Fury/6P/C2/M2/C3/M3/U2/M4 (and most other models) to accept the AW18650 or similar diameter 18mm cell. The smaller tube L1/A2/E-series can be bored for either a 17mm protected cell or for a standard size 18mm cell (like the AW2900 mAh or AW3100 mAh) but they cannot be bored for the much larger 3400 mAh cell. PM's are disabled so please click on the "contact" page at www.PrecisionWorks
PLEASE NOTE: This is the original thread started in May 2011. Some services that were offered before are no longer available (trit slot milling, bead blasting, etc.). Please refer to the current thread for up to date info on boring: http://www.candlepowerforums.com/vb...fire%AE-and-other-aluminum-or-titanium-lights
Please refer to the separate thread for info on mechanical mods: http://www.candlepowerforums.com/vb/showthread.php?335085-Mechanical-Modding-Services
NOTE #1: most machining mods don't require the entire light. Please ship only the parts to be machined. Removal of the clip, O-rings, combat rings, etc. is greatly appreciated.
Please note ... you now have two options for speed of turnaround:
1) I now offer 2-week turnaround for twice the delivered price I've always charged (i.e. $100 for a 6P, $120 for an E1 or E2, etc.)
2) Or indefinite turnaround for one-half the price of 2-week service (i.e. $50 for a 6P, $60 for an E1 or E2, etc,). Indefinite really means just that, I will not give a time frame or quote a date/month/etc. if you choose this option.
® SUREFIRE is a registered trademark of SureFire, LLC, 18300 Mount Baldy Circle, Fountain Valley, CA 92708 USA
Last edited: