Titanium P60 Style all C-Series Light Housing! **Shipping 7/14 - 7/15**

[Drywolf]

Hi Chris PM sent....

[TnC_Products]

You are all set Drywolf. Sorry for the confusion.

[Morelite]

Any new info?

[TnC_Products]

Nothing new as of yet. I did not get a chance to make the battery tube today. I really don't have material for it. My material should come in by the end of the week.

[TnC_Products]

I will post some pictures before the end of the day today.

[TnC_Products]

Ok. I have updated the first post with the pictures. I will post them here for the people that have been following this thread.

Production Pictures





Chris

[Morelite]

Lookin mighty nice, now I can't wait to get one. no make that

[easilyled]

Lookin mighty nice, now I can't wait to get one.

Hell yeah!
I bet anyone who was sitting on the fence and missed out would be regretting it now.
These are smokin!

[arewethereyetdad]

Looks great Chris! Will you have a proto of the anti-roll version as well?

[easilyled]

Looks great Chris! Will you have a proto of the anti-roll version as well?

I could be mistaken, but these appear to be the anti-roll before the cuts have been made to the ring projecting out on the tail.

[TnC_Products]

This is almost a finished proto. The only thing left on this is to mill the Anti-roll cuts and put in the lanyard hole. I will machine the Anti-roll section if I get a mill available. Right now all my mills are tied up on other jobs. This light looks way better in person than it does in the rendering. I even put a module in it to make sure it works like it should. It came out really nice.

Chris

[karlthev]

Hot damn, hot light!



Karl

[TnC_Products]

More pics.








That's it for now!

[Drywolf]

Very very nice!

[karlthev]

Amazing job on this one Chris! Just as all of your other work I have colleced ovr the years! I want one JUST as your last picture---the picture worth a thousand words. Rest of PayPal sent.



Karl

[easilyled]

Please put me down for an extension tube too and PM me to let me know full cost (including shipping to UK)

[TnC_Products]

Please put me down for an extension tube too and PM me to let me know full cost (including shipping to UK)

PM Sent!

[easilyled]

PM Sent!

Thanks! for remaining balance which includes 18650 light, extension tube & EMS shipping.

[bf1]

Doesn't get much better.

[GLOCK18]

Would it be possiable to have it milled to accept six Trit vials between the anti roll and the tail end of the light . Anti roll - No lanyard hole - Extension Tube if you have any left.

[Glenn7]

I'll take an extension tube too thanks, PP sent.

I have an idea, if its dumb just say so - could you mill down the inside dynamiter of the head and insert a copper or Alu sleeve so heat from the drop in could be managed better.
I even wondered if a few holes could be drilled through the head and have some Alu rods inserted to touch the inside sleeve so as to draw/drag heat into the outside air - and if it was done right you couldn't even see it.

Hmmm I just cant help myself.....

[TnC_Products]

Ok. Everything has been updated. Only one extension tube is left available.

If someone wants to attempt what Glenn7 suggested you are more than welcome to do what you want with your light after you receive it. Since different people make drop-in modules I am sure the sizes aren't consistant. So some Rods that might touch one module might not touch another or the module might not go in at all. I could be wrong though. The thought is there.

[arewethereyetdad]

I'll take an extension tube.

[TnC_Products]

Ok. All extension tubes have been sold.

Chris

[Glenn7]

The rods weren't ment to touch the drop in only the copper/Alu sleeve, and that sleeves inside diameter would be the same as you were going to make it in the first place - as in you would shave the inside of the head down and insert the sleeve, keeping the original size.
But hey I know what I'm talking about, I'm mad carry on don't mind me

Ok. Everything has been updated. Only one extension tube is left available.

If someone wants to attempt what Glenn7 suggested you are more than welcome to do what you want with your light after you receive it. Since different people make drop-in modules I am sure the sizes aren't consistant. So some Rods that might touch one module might not touch another or the module might not go in at all. I could be wrong though. The thought is there.

[TnC_Products]

I see. Ok, I got it now.

[scalez]

I can't believe I was late for this. They look fabulous.
Please make more!!

[Chrisdm]

Please put me down for one, next run?

Sent from my DROIDX using Tapatalk

[TnC_Products]

I can't believe I was late for this. They look fabulous.
Please make more!!

scalez, You are on the list and might be able to get one this run. I won't know until all the lights are made.

Chrisdm, I have added you to the list!

[Glenn7]

looks like you have stumbled on to the right formula that people want Chris, good one
still thinking about the lanyard hole - will it be in the tail next to the button or in the anti roll - just wondering as if its in the anti roll it might unscrew the tail?

now I'm pushing it... can we have a Ti tail cap? ....... chris glenn