Titanium P60 Style 26650 Light! ** Discussion / Interest Thread **

[TnC_Products]

Hi Chris,
Don't get rid of the version 3 head.
I just received my lights and I got two version 1's and my order was for one of each.
Oh and Thank You, these lights are awesome, great work Chris.

Sorry about that. When I printed out the Packing slip it doesn't print out my notes I make on the order. I will ship out the V3 Head today.

[Morelite]

Sorry about that. When I printed out the Packing slip it doesn't print out my notes I make on the order. I will ship out the V3 Head today.

No Problem, I just need to know if I should send the bare head back or the whole head (meaning with the glass and ring)? It will go out in tomorrows mail as todays has already went.

[chipwillis]

Wow I got mine today and it is nice... Thanks a bunch for making these.

Along with a few other TNC killer lights from 2008

[easilyled]

I received mine today (V3) head.

This is a killer light. You've excelled yourself Chris. I like it even more than the 18650 P60 light you did, and that's saying something.

[Morelite]

Just for fun.
A D36 head would look great on the top one.
That little one sure would make a cute light if there was room for a battery.

[TnC_Products]

That little one looks like you would be able to fit a 2032 Coin cell . That would be a pretty cool little chubby light.

[TnC_Products]

Just for fun.
A D36 head would look great on the top one.
That little one sure would make a cute light if there was room for a battery.

I am gonna have to make an 18340 (CR123) size tube for your little one you got there. Heck, I will have to make two so I can have one also.

[Morelite]

A little 18340 tube sounds great, will it be the same diameter as the 26650 tube? I'm hoping so.

I also see we have a few interested in a TI D36 head. Just hoping there too.

[karlthev]

Make it three Chris!


Karl

[chipwillis]

I would maybe take a fatty 18350 with the larger head like I have on my 26650.

A little 18340 tube sounds great, will it be the same diameter as the 26650 tube? I'm hoping so.

I also see we have a few interested in a TI D36 head. Just hoping there too.

[TnC_Products]

The little 18340 (CR123) tube will be the same diameter as the light. So the only difference will be a shorter length.

chipwillis it will only be an 18340 battery tube. It will be for people with the Ti 26650 Light already.

I was thinking a couple more people were going to want it. So I made four of them. See, I need to tell my wife that she is wrong..... I do think about others.

Chris

A little 18340 tube sounds great, will it be the same diameter as the 26650 tube? I'm hoping so.

I also see we have a few interested in a TI D36 head. Just hoping there too.

[karlthev]

PM to you Chris.



Karl

[TnC_Products]

I will post a picture so you can see the difference in length from the 26650 to the 18340(CR123) tube.

Chris

[TnC_Products]

Ok. About the D36 Head. Just the material for the D36 head is around $100.00 ea. That is a very large head with a lot of machining so I know the cost will probably be fairly steep. I can try to get a ball park figure for anyone that is till interested.

Chris

A little 18340 tube sounds great, will it be the same diameter as the 26650 tube? I'm hoping so.

I also see we have a few interested in a TI D36 head. Just hoping there too.

[easilyled]

Ok. About the D36 Head. Just the material for the D36 head is around $100.00 ea. That is a very large head with a lot of machining so I know the cost will probably be fairly steep. I can try to get a ball park figure for anyone that is till interested.

Chris

I am certainly interested. Waiting to hear!

[TnC_Products]

Picture of the 18340 (CR123) Titanium tube.

In the picture from top to bottom:
HA-Natural 26650 Tube
Titanium 18340 Tube
Top of the 18340 Tube showing the wall thickness.

[chipwillis]

looks ahhhhhhsome.. Just need paypal info and amount and send one my way

[TnC_Products]

Let me see if I can finish machining the back end where the tail cap screws in. I will try to finish it today so they can ship today. I will post a link to the store to purchase it.

Chrirs

[easilyled]

Picture of the 18340 (CR123) Titanium tube.
Top of the 18340 Tube showing the wall thickness.

Are you sure that's strong and chunky enough?
Nice machining!

[karlthev]

One of the 18340 tubes for me Chris but can't PayPay you 'til after 8:00PM Eastern time when I get home---hold onto one for me! Interested in the "36" as well!

Karl

[Halibut]

Interested as well, Chris. Let me know if there's one left!

-Dan

[TnC_Products]

Karl, Not a problem. The product on my store will be for invite only. So you can only purchase one if you have the link I send. So your 18340 tube will be there when you order.

Halibut, I totally forgot you ordered one of the Titanium lights also. I guess I will have one for you as well. I will just have to make another one for me sometime later down the road. Oh well, that is how it usually goes.. No problem at all.

I will PM Everyone the Link when I finish machining.

Chris

[Morelite]

Ok. About the D36 Head. Just the material for the D36 head is around $100.00 ea. That is a very large head with a lot of machining so I know the cost will probably be fairly steep. I can try to get a ball park figure for anyone that is till interested.

Chris

I know I'm still in for one (D36 head that is).

for the 18340 tube.


Thanks Chris

[easilyled]

Chris, I'm curious as to the construction of the 26650 bodies.

They actually appear to be in 2 parts as there seems to be a join not far from the neck of the 26650 body which the head screws into. Therefore I was wondering whether they have some sort of built-in adaptor piece?

[Morelite]

The body is two pieces, a battery tube and a P60 adapter.

[easilyled]

The body is two pieces, a battery tube and a P60 adapter.

Thanks, I haven't tried to unscrew the adapter, but it was obvious from looking at it.

[chipwillis]

The Ti light that is left on your site is it the V1 or V3 head?

[Drywolf]

The Ti light that is left on your site is it the V1 or V3 head?

Ok. The titanium lights have been shipped!

I have an extra one that is still available. It can be either Version 1 or Version 3 as I have both heads available. It is ready to ship.

Chris

[Morelite]

The Ti light that is left on your site is it the V1 or V3 head?

It should be a V1, Chris sent me the V3 head to replace V1 in an order mix-up.

[Morelite]

Guess what showed up today?
A few little hints.





I think the V3 head looks the best on it but I need to keep the V3 head on the 26650 body to use with the higher powered quad drop-ins.
I can't wait to get a titanium D36 head for one of the 26650 bodies.

Thanks Again Chris for making these.