Cerakote Service *Run 3 Open!* Get your lights coated by a NIS certified applicator!

[arcane]

FINALLY had a minute to take some shots of the TI Blue!! I LOVE IT! Major upgrade from the dirty white that was on the PD. . . This blue is AWESOME. If/when there is another run, I'm in for some other pieces and parts!

Anyone else interested in another run of Ti Blue?

I'm totally down to do Ti Blue again, that is a great color especially when paired with the ss ring!

The Ti Blue looks awesome!
I'm thinking about getting my Malkoff MD3 host (tail, body, head) and maybe a Malkoff Hound Dog head in Ti Blue..

[bugsy714]

The Ti Blue looks awesome!
I'm thinking about getting my Malkoff MD3 host (tail, body, head) and maybe a Malkoff Hound Dog head in Ti Blue..

Do it do it do it!!!

haha, I want to do Ti Blue for the next batch...who else is in?

[bugsy714]

Fingers crossed for a full or partial return of parts this weekend....we are so close

[bugsy714]

Pardon if this has been asked, search isn't working for me ATM. Would a 6P Defender fall under "Standard Size"? It's the same size as a 6P, but the clicky tailcap comes apart in two peices (could probably be coated as one, I don't know...) and the head has a cren bezel (which could possibly be left together as well). I can take some pics if needed.

PM sent =)

[bugsy714]

Finally got around to putting back together some goodies I got from Bugsy:

Solarforce L2T Lego done in Graphite Black and Surefire 6P done in Ti Blue...awesome job!

Awesome! the L2T is my favorite non-surefire light, I am doing some in white and bronze in this batch!

[HIDblue]

Fingers crossed for a full or partial return of parts this weekend....we are so close

Nice! Anxiously awaiting one in Orange and one in Bronze...

[iNcHeS]

Fingers crossed for a full or partial return of parts this weekend....we are so close

^^ Like this very much

[Luciaro]

The Wee is awesome...

FINALLY had a minute to take some shots of the TI Blue!! I LOVE IT! Major upgrade from the dirty white that was on the PD. . . This blue is AWESOME. If/when there is another run, I'm in for some other pieces and parts!

I think the first and last are very real representations of the actual color. . . the middle was a money shot; a bit darker to demonstrate beauty of trits!

Thanks Bugsy!

[curiousone1]

I would be interested in an EX10 in Ti blue..........

[bugsy714]

Awesome!
Who else for Ti Blue???


ETA on other parts has been pushed back to next weekend...they are coming soon!

[iNcHeS]

Hey bugsy, just wondering if there has been anymore interest in Yellow (schoolbus or corvette)?

I've got another light getting delivered this week that I wouldn't mind getting done in corvette if you were planning a run?

Cheers

[grayhighh]

Ooooh, i love that lummi wee.

FINALLY had a minute to take some shots of the TI Blue!! I LOVE IT! Major upgrade from the dirty white that was on the PD. . . This blue is AWESOME. If/when there is another run, I'm in for some other pieces and parts!

I think the first and last are very real representations of the actual color. . . the middle was a money shot; a bit darker to demonstrate beauty of trits!

Thanks Bugsy!

[bugsy714]

Hey bugsy, just wondering if there has been anymore interest in Yellow (schoolbus or corvette)?

I've got another light getting delivered this week that I wouldn't mind getting done in corvette if you were planning a run?

Cheers

So far we have 2 for schoolbus yellow, I'm down for a few so we need about 5 more pieces to make a run...any takers?

[HIDblue]

ETA on other parts has been pushed back to next weekend...they are coming soon!

The anticipation is killing me...well, okay, maybe it's not 'killing' me but I sure am looking forward to them!

[Inkidu]

So far we have 2 for schoolbus yellow, I'm down for a few so we need about 5 more pieces to make a run...any takers?

Being from the greater Pittsburgh area, I was thinking this color might be nice for a Pittsburgh Steelers Black and "Gold" torch.
The schoolbus yellow does seem close to the "Gold" color of the uniforms. but until you see the color in person you just don't know for sure.
Also not so sure what black color has the sheen that corresponds with the sheen of the school bus yellow color (gloss, semi, flat)
I do know that the Pittsburgh Steelers do have a country wide appeal that might bring in enough orders to complete a run.
Thoughts Bugsy.

[Matt7337]

I've been planning on finishing a Nitecore D11 mod and was hoping to find this thread and run open! I'd ideally like it done in Midnight Blue, but the Ti blue is just as nice. So, I suppose if there's space left in the current run and Ti Blue is the only blue going, put me down for the head & tail of a D11. I might see about getting one of the D11 clips for it and having that done in black or burnt bronze as well. It's looking like I'll have to purchase that from a US supplier though, so it might not make it to me in time. What's the final date that parts have to be at the coater for the current run?

[tattoosteve99]

Are we there yet? Lol

[iNcHeS]

Well, once I get the light I'll be in for School Bus yellow - not sure on what category the light fits into price wise though, dimensions from the site are as follows:

Dimension( mm ): 121.5( length ) x 24(body) x 24(head)

It's a basic cylinder with a few grooves. Ill probably get the bezel ring done in another colour if that changes the price, just not sure what yet :/
If you could let me know an approximate price that would be awesome!

Thanks!

[bugsy714]

Being from the greater Pittsburgh area, I was thinking this color might be nice for a Pittsburgh Steelers Black and "Gold" torch.
The schoolbus yellow does seem close to the "Gold" color of the uniforms. but until you see the color in person you just don't know for sure.
Also not so sure what black color has the sheen that corresponds with the sheen of the school bus yellow color (gloss, semi, flat)
I do know that the Pittsburgh Steelers do have a country wide appeal that might bring in enough orders to complete a run.
Thoughts Bugsy.

Sounds great! I hadn't thought about doing sports themed color schemes...pretty cool idea!

[bugsy714]

I've been planning on finishing a Nitecore D11 mod and was hoping to find this thread and run open! I'd ideally like it done in Midnight Blue, but the Ti blue is just as nice. So, I suppose if there's space left in the current run and Ti Blue is the only blue going, put me down for the head & tail of a D11. I might see about getting one of the D11 clips for it and having that done in black or burnt bronze as well. It's looking like I'll have to purchase that from a US supplier though, so it might not make it to me in time. What's the final date that parts have to be at the coater for the current run?

We have some time but Ireland is going to be a good 2 week trip for the parts to arrive! If you want to order parts and have them shipped directly to me that works great and saves some $$$ on shipping =)

ETA on submitting Ti Blue and possibly schoolbus yellow is 2 weeks, eta on completion is 3-4 weeks from that; I can always slide parts into the batch up until it is sprayed (so the real deadline is a month or so)

[bugsy714]

Are we there yet? Lol

Don't make me come back there haha, channeling my father on that one =P

[bugsy714]

Well, once I get the light I'll be in for School Bus yellow - not sure on what category the light fits into price wise though, dimensions from the site are as follows:

Dimension( mm ): 121.5( length ) x 24(body) x 24(head)

It's a basic cylinder with a few grooves. Ill probably get the bezel ring done in another colour if that changes the price, just not sure what yet :/
If you could let me know an approximate price that would be awesome!

Thanks!

Sounds like the size of a 6p...so $45 for the host, $10 for the ring =)

[Matt7337]

We have some time but Ireland is going to be a good 2 week trip for the parts to arrive! If you want to order parts and have them shipped directly to me that works great and saves some $$$ on shipping =)

ETA on submitting Ti Blue and possibly schoolbus yellow is 2 weeks, eta on completion is 3-4 weeks from that; I can always slide parts into the batch up until it is sprayed (so the real deadline is a month or so)

If push comes to shove and we run out of time, I will order another D11/D11.2 and have it shipped to you, but I'd like to try and ship my own one to you in time. I probably will order a clip and have that shipped to you - if you could send me your address by PM I'll do that soon, thanks! I will send the light body by the fastest method I can. It'll probably cost a lot to do so, but I really want it coated in this run!

[Matt7337]

I received your PM with shipping info Bugsy, many thanks I bought a Dereelight DBS V3 off the MP last night and would like to have that coated as well - preferably in burnt bronze. There's the light itself (bezel, head, body & tailcap) and an additional aspheric head (bezel & main head) which I'd like all coated to match. How much would this be? I'd say it's just slightly bigger than a Surefire 6P, obviously with a much larger head.

[bugsy714]

I will take a look at it when it arrives; my guess would be $45-$50 for the main host and $25 for the second, larger head

[iNcHeS]

I am still extremely interested in this yellow run, however I've decided the host that I have won't do the build that I want to do justice, so I'm in search of another host :/ Hope to have something soon

[bugsy714]

Touched base with the coater today, he was in the process of spraying our parts! Eta is next weekend, I may be able to have goodies in the mail by monday

[bugsy714]

I am still extremely interested in this yellow run, however I've decided the host that I have won't do the build that I want to do justice, so I'm in search of another host :/ Hope to have something soon

No rush, we are a while out on that, still have to special order the materials

[badtziscool]

Touched base with the coater today, he was in the process of spraying our parts! Eta is next weekend, I may be able to have goodies in the mail by monday

Awesome news!! Can't wait to piece together my Pineapple aspheric!

[WarriorOfLight]

Touched base with the coater today, he was in the process of spraying our parts! Eta is next weekend, I may be able to have goodies in the mail by monday

Sounds like the bronze sparing is finisched soon