P60 modules - warm, neutral, cool white/XPG-S2- XML-U2 / P60 modules (part 9)

[JTik]

HI

Thanks order has shipped

Dave

That was fast! Thank you.

[eg1977]

Is red xpe drop-in available in single mode? If yes, how many amps?

[nailbender]

Is red xpe drop-in available in single mode? If yes, how many amps?

Hi

Yes it is available in XPE / platinum dragon , all are available in single level. I usually push them at 1 amp. They can be pushed harder but you do not get a true red if you push them too hard, they become red orange when pushed to extremes.

I also have red SST 90's but they are more floody but very bright.

Dave

[psychbeat]

Just to confirm - the 4C tint is a bit "creamier" than the 4A which has a tad more "rose" to it.
It's a subtle difference but I def prefer the 4C!!
VERY neutral! No GREEN!

Stoked to get outside with it!

I'd keep this exact tint around for a long time- its ideal IMHO
Thanks!

[nailbender]

Just to confirm - the 4C tint is a bit "creamier" than the 4A which has a tad more "rose" to it.
It's a subtle difference but I def prefer the 4C!!
VERY neutral! No GREEN!

Stoked to get outside with it!

I'd keep this exact tint around for a long time- its ideal IMHO
Thanks!

Hi

Yes I really liked the color as soon as I saw it, it is much like the 3C but deeper in tone.

Thanks for the input

Dave

[eg1977]

Order placed:

(2) Red XPE - single mode, 1 amp, smooth reflector, 3-6 volts

Paypal sent 9HR34909NB917952M

[RCantor]

How come no one tells me you have a 4C xml? I have to see what it's like but I have a hard time believing it'll be better than the 4A.

3 level Low / Med / High Regulated 2.8A, 2.8-6 volts, LOP, potted 4C XML for solarforce host. Did I leave anything out? I'm kind of rusty

[nailbender]

How come no one tells me you have a 4C xml? I have to see what it's like but I have a hard time believing it'll be better than the 4A.

3 level Low / Med / High Regulated 2.8A, 2.8-6 volts, LOP, potted 4C XML for solarforce host. Did I leave anything out? I'm kind of rusty

Hi

I know you will like the 4C, it is more creamy and less rosy than the 4A at least in my eyes. It is much like the 3C but with deeper slightly darker tones if that makes any sense.
No you left nothing out and it will ship in the next day.

thanks

Dave

[yifu]

I'll take a XP-G 85CRI 1 level at 1.4A please!

[yifu]

Actually, i would like to change it to 90 minimum CRI please, if not too late.

[nailbender]

Actually, i would like to change it to 90 minimum CRI please, if not too late.

HI

That is what it would have been since I don't carry the 85CRI at this time.

Dave

[nobbybonez]

hi


IR platinum dragon p60 dropin required. to be used in solarforce l2p host, using protected rechargeable 18650.
940nm,
even flood required at as close to 10m spread at 50m as possible please.
3 mode
potted

module $45
int ship $5
potting $5
total $55

paypal sent.


thanks

[yifu]

HI

That is what it would have been since I don't carry the 85CRI at this time.

Dave

That's great! Let me know when it has shipped!

[nailbender]

That's great! Let me know when it has shipped!

Hi

Check your email as it has shipped. The proper sized spring is already installed and has been tested in a stock SF 6P and the lamphead closes fine. I included a whole spring as a spare but the one you need is already on the module.

Thanks

Dave

[nailbender]

hi ALL

I am closing this sections and have started Part 10 to shorten up the posts. Please go HERE FOR PART 10

Thanks

Dave


THIS SECTION IS CLOSED

[DM51]

Continued in Part 10...

[romadant]

PM coming soon... as soon as I can get past the pesky 3 post minimum to PM you.

Looking to get a drop in for a Surefire M951 - all I know is that I need a fully potted one. I would like to run a single rechargeable battery and ditch the stacked CR123As... is this possible?