Foxfury Scout
Page 1 of 3 123 LastLast
Results 1 to 30 of 83

Thread: 2P 18650 P60 M*g 1D by Fivemega

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default 2P 18650 P60 M*g 1D by Fivemega

    (AVAILABLE)

    Please allow 7 days to ship


    Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
    All these information will be next to your CPF handle in this post.
    All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.




    Use a pair of needle nose pliers to install lamp module and lens.


    Installed P60 on left, installed quad on mid picture and installed WA1111 on right picture.

    Hi folks, here is another creation from Fivemega.
    I have made very limited quantity of these and there will not be more. So it's your choice to grab one or regret for ever.
    A completly modified M*g D body with custom made D26 (P60 style) head, completly semi gloss (almost matte) hard anodized.
    Body is shortened and dual bored with integrated battery holder to accept 2 18650 in parallel for total of 4.2 volt. No serial version available but for 8.4 volt application, possible to use 4 IMR 18350 (all cells are positive in/negative to tail side)
    Head is custom made from one piece solid aluminum to accept any P60 stlye lamp/LED module with diameter of about 45mm.
    There is no bezel to cover head. module is directly seated into cave metal which is outside finned for maxim heat dissipating. There is no threads (gap) to interrupt heat transfering.
    There is one small stainless steel ring to hold lamp module and one bigger stainless steel ring to hold UCL lens and of course high quality UCL lens from flashlightlens is included.
    There is one o'ring under lens, one o'ring on head and one o'ring on tail cap same as M*g
    You may want to check out nailbender's excellent
    XML and XML-2 too.
    I highly recommend to use 2 high quality protected 18650 with same age and same capacity.
    Since both batteries are connected in parallel, load on each cell is half of total load so less stress to each cell, longer battery life, less voltage drop, higher performance and longer run time per charge. Pair of protected 3400mAh cells will run the 3 Amp module for way more than two hours.
    Total length is about 7" and head diameter is 1.75"
    What you will receive is complete host including body, switch, battery holder, tail cap, head, 2 SS bezels, UCL lens and all required o'rings. No battery and No module included or offered.
    Price: $98
    Each extra UCL lens $6
    Shipping to States $7.00 for up to 3 units.
    Internationally $12 each
    No reservation please. You must pay
    FIRST then claim your spot by posting here. I will sign your name right after receiving payment unless you paying by MO.
    Please don't pay if you may change your mind. There will not be any refund.
    It is
    ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    It is ABSOLUTELY NECESSARY to pick next available and valid number, post detail of your order here and paypal note along with your CPF handle.
    I will never figure out what for is your payment and from whom without above information therefore I will reject payment.
    Example:
    Mr Dan26 for #49
    Paypal:
    fivemega@aol.com
    Please PM for postal money order payment.
    [COLOR=black]
    ----------------------
    #01 D26 M*g 1D $98 nailbender paid shipped 03110240000019937648
    #02 D26 M*g 1D $98 nailbender paid shipped 03110240000019937648
    #03 D26 M*g 1D $98 psychbeat paid shipped 03103490000199326329
    #04 D26 M*g 1D $98 RCantor paid shipped 23071770000008632039
    #05 D26 M*g 1D $98 RCantor paid shipped 23071770000008632039
    #06 D26 M*g 1D $98 PoliceScannerMan paid shipped 23071770000008631711
    #07 D26 M*g 1D $98 Sanderman paid shipped 23071770000008631704
    #08 D26 M*g 1D $98 bugsy714 paid shipped 03103490000199338544
    #09 D26 M*g 1D $98 Nite paid shipped 23082180000028851280
    #10 D26 M*g 1D $98 RCantor paid shipped 03112550000057987580
    #11 D26 M*g 1D $98 RCantor paid shipped 03112550000057987580
    #12 D26 M*g 1D $98 jak3All3n paid shipped LC485381087US
    #14 D26 M*g 1D $98 abanytime paid shipped 23082940000002467760
    #15 D26 M*g 1D $98 CMAG paid shipped 23082940000002467883
    #16 D26 M*g 1D $98 CMAG paid shipped 23082940000002467883
    #17 D26 M*g 1D $98 CMAG paid shipped 23082940000002467883
    #18 D26 M*g 1D $98 Freaker paid shipped 03112550000058015459
    #19 D26 M*g 1D $98 cubebike paid shipped LC452889693US
    #20 D26 M*g 1D $98 Xmldriver paid shipped LC740353742US
    #21 D26 M*g 1D $98 Silgt paid shipped LC740353756US
    #22 D26 M*g 1D $98 XFlash paid shipped 03113260000160975211
    #23 D26 M*g 1D $98 Rovert paid shipped LC740353813US
    #24 D26 M*g 1D $98 bradleyj37 paid shipped 03113260000161241018
    #25 D26 M*g 1D $98 S1LVA paid shipped 23082940000002470746
    #26 D26 M*g 1D $98 bbrins paid shipped 9505510518353176456364
    #27 D26 M*g 1D $98 flyback paid shipped 0114901159818849095114
    #28 D26 M*g 1D $98 mandrake paid shipped 9114901159818830949426
    #29 D26 M*g 1D $98 euroken paid shipped 9114901159818848963933
    #30 D26 M*g 1D $98 jmm244 paid shipped 9114901159815396497477

    #31 D26 M*g 1D $98 (AVAILABLE)
    #32 D26 M*g 1D $98 (AVAILABLE)
    #33 D26 M*g 1D $98 (AVAILABLE)
    #34 D26 M*g 1D $98 (AVAILABLE)
    #35 D26 M*g 1D $98 (AVAILABLE)

    -----------------------
    Please find link of my other products here and click on each link you are interested on.
    -----------------------
    (A V A I L A B L E)
    Last edited by fivemega; 08-04-2014 at 12:59 AM.

  2. #2
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    ***Question:
    Quote Originally Posted by think2x View Post
    Any 2S2P for those that want to run 8.4V? (P91, M91, OR triple)
    Did you read this?
    Quote Originally Posted by fivemega
    No serial version available but for 8.4 volt application, possible to use 4 IMR 18350 (all cells are positive in/negative to tail side)
    ---
    Quote Originally Posted by psychbeat View Post
    how many amps can the switch handle?
    These are towerless M*g D switch and many people use with high current incand bulbs such as Osram.
    Not to mention incands initial spike is switch killer but LEDs don't have such spike and switch friendly.

    ---
    Quote Originally Posted by psychbeat View Post
    why are they ~7 inch long
    These are only 1.385" longer than Cooly and it's because of front side switch.
    ---
    Quote Originally Posted by richpalm View Post
    I'd love to do the same thing in a C size.
    These are readily available at this moment. Why bother to make C size M*g which needs boring to fit 26xxx cells?
    ---
    Quote Originally Posted by shinpu View Post
    is there any modification done to the head end of the tube? would i be able to remove the p60 head and put on a Mag head?
    Yes, front of tube is shortened and rethreaded from inside (just like tail side). This was necessary to keep the overal length as short as possible.
    ---
    Quote Originally Posted by bugsy714 View Post
    Just to be clear- the cells run in parallel of the dropin only gets 4.2V? Can the 3100mah 18650's fit the adapter?
    Quote Originally Posted by fivemega
    Body is shortened and dual bored with integrated battery holder to accept 2 18650 in parallel for total of 4.2 volt. No serial version available but for 8.4 volt application, possible to use 4 IMR 18350

    Any cell similar size of protected AW 18650 will fit.
    ---
    Quote Originally Posted by RCantor View Post
    Will you be able to use it to switch modes on multi-mode lights? Will you have to click the switch all the way off & on to get the mode change? How well do these switches hold up under all that clicking?.
    M*g Switch is forward clicky and turns "ON" with slight pressure for momentary. Firm pressure will click it "ON". It works exactly like McClicky but mounted in mid side of body.
    ---
    Quote Originally Posted by RCantor View Post
    Do you have a 4AA to 32650 adapter? Or better yet a 2S 4P AA to 2*32650 adapter? Thanks.
    4 serial AA adapters are available here .
    ---
    Quote Originally Posted by bugsy714 View Post
    Can a 32650 also be substitued for the dual 18650? Not really ant reason to do so considering 2X 3100mah cells gives you 6200mah!!!!
    Nippled 32650/32700 will fit and work fine without tail side adapter but flat top 32650 cells will need some magnet for positive contact.
    ---
    Quote Originally Posted by dengdam View Post
    anyone know what size the drop in space of this and COOLY 26650 are? diameter and length? how long can the drop in be and how large of a heatsink can i put in there?
    P60, P61, P90, P91 and all compatible D26 lamp module of LED or incan.
    ---
    Quote Originally Posted by CarpentryHero View Post
    With the right dropin, can this run on a D cell battery?
    Yes.
    ---
    Quote Originally Posted by jak3All3n
    I was wondering if i can use one of your 4aa to 1d adaptor in it, like here http://www.candlepowerforums.com/vb/...12AA-to-3D-M*g
    will it fit/will it work? i'd like to compare this setup with 2p 18650s.
    2P 18650 host is designed for long run and can't take 4AA holder without boring.
    However, if bore out the barrel, 4AA will fit and work.

    Using 3400mAh 18650 cells you will get 6800 mAh @ 3.7 volt or approx. 25 Wh
    Using 2700mAh AA cells you will get 2700mAh @ 4.8 volt or approx. 13 Wh
    Last edited by fivemega; 01-10-2014 at 04:50 PM.

  3. #3

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Hi Buddy

    I will take #1 and #2

    thanks

    Dave

  4. #4
    Flashaholic* think2x's Avatar
    Join Date
    Jul 2009
    Location
    Pulaski, Va.
    Posts
    1,409

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by fivemega View Post
    ****Questions:
    Any 2S2P for those that want to run 8.4V? (P91, M91, OR triple)

  5. #5
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by think2x View Post
    Any 2S2P for those that want to run 8.4V? (P91, M91, OR triple)
    Did you read this?
    Quote Originally Posted by fivemega
    No serial version available but for 8.4 volt application, possible to use 4 IMR 18350 (all cells are positive in/negative to tail side)

  6. #6
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    how many amps can the switch handle?

    these are really cool BTW

  7. #7
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by psychbeat View Post
    how many amps can the switch handle?
    These are towerless M*g D switch and many people use with high current incand bulbs such as Osram.
    Not to mention incands initial spike is switch killer but LEDs don't have such spike and switch friendly.

  8. #8
    Flashaholic* think2x's Avatar
    Join Date
    Jul 2009
    Location
    Pulaski, Va.
    Posts
    1,409

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by fivemega View Post
    ***Question:

    Did you read this?---
    I guess I shouldn't skim over things too quickly.

  9. #9
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    OK Im going for it!

    PP sent for #3

    Aside from the extra length I think this will be superior to the 26650
    for my uses + Ive already got some 3100mah 18650s which will be pretty
    awesome with my VAN quad.

    one ? tho- why are they ~7 inch long (Im not familiar with Mags)

  10. #10
    Banned richpalm's Avatar
    Join Date
    Jun 2003
    Location
    Central Pa.
    Posts
    965

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    These are nice! I'd love to do the same thing in a C size. Any plans for that?

    Rich

  11. #11

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by psychbeat View Post
    [..]one ? tho- why are they ~7 inch long (Im not familiar with Mags)
    Mag switch in body tube takes up some room, I believe.
    Last edited by wrf; 11-20-2011 at 01:40 AM. Reason: spelling

  12. #12
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default

    Ahhhh the switch is in the front of the tube..
    I see now.
    Duh

    Thanks

  13. #13

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    is there any modification done to the head end of the tube? would i be able to remove the p60 head and put on a Mag head?

  14. #14
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by psychbeat View Post
    why are they ~7 inch long
    These are only 1.385" longer than Cooly and it's because of front side switch.
    ---
    Quote Originally Posted by richpalm View Post
    I'd love to do the same thing in a C size.
    These are readily available at this moment. Why bother to make C size M*g which needs boring to fit 26xxx cells?
    ---
    Quote Originally Posted by shinpu View Post
    is there any modification done to the head end of the tube? would i be able to remove the p60 head and put on a Mag head?
    Yes, front of tube is shortened and rethreaded from inside (just like tail side). This was necessary to keep the overal length as short as possible.

  15. #15
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default

    Thanks for explaining Varooj!

    Its staggering to think of 6200mah just chilling there in yer hand!

    For regulated hi amp modules this seems like THE solution.

  16. #16

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Just to be clear- the cells run in parallel of the dropin only gets 4.2V? Can the 3100mah 18650's fit the adapter?
    Surefire 18650 Bored Hosts & Cerakote!
    I am visually impaired please excuse my typos =P

  17. #17

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    I'm not at all familiar with the mag switch. Will you be able to use it to switch modes on multi-mode lights? Will you have to click the switch all the way off & on to get the mode change? How well do these switches hold up under all that clicking? Thanks. This is a great thing.

    BTW, I should have time tommorrow to pack your modules and my bad switches. It's the first time I've been home more than 3 days in a row since March.

    One more thing: Do you have a 4AA to 32650 adapter? Or better yet a 2S 4P AA to 2*32650 adapter? Thanks.
    Last edited by RCantor; 11-20-2011 at 01:45 AM.

  18. #18

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Is the switch a forward or reverse clicky?
    Surefire 18650 Bored Hosts & Cerakote!
    I am visually impaired please excuse my typos =P

  19. #19

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by RCantor View Post
    I'm not at all familiar with the mag switch. Will you be able to use it to switch modes on multi-mode lights? Will you have to click the switch all the way off & on to get the mode change? How well do these switches hold up under all that clicking?
    they are forward clicky so you would have to either half press a few times to select mode before fully pressing to on, or on and off a few times. the switch is fairly burly, i've owned several D cell mags over the years and the oldest is almost 15 years with all original parts.

  20. #20
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,512

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by bugsy714 View Post
    Just to be clear- the cells run in parallel of the dropin only gets 4.2V? Can the 3100mah 18650's fit the adapter?
    Quote Originally Posted by fivemega
    Body is shortened and dual bored with integrated battery holder to accept 2 18650 in parallel for total of 4.2 volt. No serial version available but for 8.4 volt application, possible to use 4 IMR 18350

    Any cell similar size of protected AW 18650 will fit.
    Quote Originally Posted by RCantor View Post
    Will you be able to use it to switch modes on multi-mode lights? Will you have to click the switch all the way off & on to get the mode change? How well do these switches hold up under all that clicking?.
    M*g Switch is forward clicky and turns "ON" with slight pressure for momentary. Firm pressure will click it "ON". It works exactly like McClicky but mounted in front of body.
    Quote Originally Posted by RCantor View Post
    Do you have a 4AA to 32650 adapter? Or better yet a 2S 4P AA to 2*32650 adapter? Thanks.
    4 serial AA adapters are available here .
    Last edited by fivemega; 11-20-2011 at 03:33 AM.

  21. #21

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    #4&5 are mine. Thanks for the explanation.

  22. #22

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    OK, I ordered a black 8AA to 2D adapter - would you send it with the 2 m@gs ? Thanks.
    Last edited by RCantor; 11-20-2011 at 01:43 PM.

  23. #23
    Banned richpalm's Avatar
    Join Date
    Jun 2003
    Location
    Central Pa.
    Posts
    965

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Quote Originally Posted by fivemega View Post

    These are readily available at this moment. Why bother to make C size M*g which needs boring to fit 26xxx cells?
    Money. Mag C is cheap and I like to be different!

  24. #24

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    Hard to believe there are any of these left. Every quad should have one of these as its home. Double the runtime of the standard 18650 hosts.

  25. #25

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    they serve the same purpose as the 26650, I actually think this is the smartest design for high draw uses because you can use any pair of matched 18650 to run a 6 amp dropin.
    Surefire 18650 Bored Hosts & Cerakote!
    I am visually impaired please excuse my typos =P

  26. #26
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default

    Yah and 18650s just keep getting better.

  27. #27
    *Flashaholic* PoliceScannerMan's Avatar
    Join Date
    Jul 2005
    Location
    Gainesville,FL
    Posts
    7,088

    Default Re: 2P 18650 P60 M*g 1D by Fivemega



    #39 COOLY $99+$7 shipping
    #6 D26 M*g 1D 2x18650 $98+$5

    Total $209

    Posting this in both sales threads to avoid confusion.

    Ok to ship all at once if you prefer.
    I may not be that bright, but my lights are!
    "I hate when I buy crap, so I try very hard not to sell it."
    -Gene Malkoff

  28. #28

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    #7 plus US shipping

  29. #29
    Flashaholic* psychbeat's Avatar
    Join Date
    Nov 2009
    Location
    SF norcal
    Posts
    1,649

    Default

    Just got mine!!
    It's not as big as I feared and looks pretty darn mean!
    AWESOME!!
    Should be plenty of heatsinking too.
    These are gonna be classics- wish I could afford 2more

  30. #30

    Default Re: 2P 18650 P60 M*g 1D by Fivemega

    #8 pp sent + us shipping

    Thanks V!
    Surefire 18650 Bored Hosts & Cerakote!
    I am visually impaired please excuse my typos =P

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •