Making a Aircraft Position strobe for the tail.
Plenty of DIY/Homemade taxi/position lights but no LED Strobes
Idea 1 A triangle 1inch aluminum with 3 leds for 360
Idea 2 A elliptical shape with 4
How would the emitters handle no covers /rain/dirt/ etc.
Recreational Aviation and does not require any to be fitted but as the plane is white it is hard to see.
Thanks everyone
Tony
Anti-collision strobe light system must project light 360° around the aircraft's vertical axis. One or more strobe lights can be used.An anti-collision strobe light system must project light + or - 30° above and below the horizontal plane of the aircraft. One or more strobe lights can be used. The + or - 75° projected light is required
. The anti-collision wing tip mounted lights must converge within 1200 feet directly in front and rear of the aircraft on center line. If the wing tip strobe light convergence is greater than 1200 ft. in back of the aircraft, a 3rd light is necessary.
Plenty of DIY/Homemade taxi/position lights but no LED Strobes
Idea 1 A triangle 1inch aluminum with 3 leds for 360
Idea 2 A elliptical shape with 4
How would the emitters handle no covers /rain/dirt/ etc.
Recreational Aviation and does not require any to be fitted but as the plane is white it is hard to see.
Thanks everyone
Tony
Anti-collision strobe light system must project light 360° around the aircraft's vertical axis. One or more strobe lights can be used.An anti-collision strobe light system must project light + or - 30° above and below the horizontal plane of the aircraft. One or more strobe lights can be used. The + or - 75° projected light is required
. The anti-collision wing tip mounted lights must converge within 1200 feet directly in front and rear of the aircraft on center line. If the wing tip strobe light convergence is greater than 1200 ft. in back of the aircraft, a 3rd light is necessary.
Last edited: