4 Sevens
Page 1 of 2 12 LastLast
Results 1 to 30 of 43

Thread: Thread: CLOSED-#017 Nitrile and Viton O-Rings for McGizmo Clicky Paks-Closed

  1. #1
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Thread: CLOSED-#017 Nitrile and Viton O-Rings for McGizmo Clicky Paks-Closed

    Hi guys,

    I have a supply of #017 Buna-N (nitrile) and Viton o-rings for use on McGizmo's Clicky paks. These are the sealing ring between the pak and the head, which sits just below the threads on the pak. If your rings are worn, or you want rings that will tolerate a wider variety of lubricants than the stock EPDM rings, these are excellent replacements. These will work for any of your 3v or 6v paks for Haikus, Mules, SunDrops, Makais etc. I had to order larger amounts than I needed and wanted to pass on the supply to you all at cost.

    I currently have 0 Buna rings.
    I currently have 0 Viton rings.


    I will try to keep this post up to date with available quantities. If there is a call for more of these, I would be willing to order more to keep the thread going, or maybe if there is other popular sizes, I would possibly expand the offering at some point. Please leave any comments or questions you have.

    There will be a $0.75 base price to cover shipping/packaging/PP fees and then please add $0.03 per unit for Buna and $0.11 per unit for Viton. Please post your order here and I will PM you my PP addy.

    PP only please; orders will only be shipped to USA addresses due to the low value of these items, and the fact that I intend to mail them directly from my house.

    Thanks everyone.


    Addendum:

    Here is a chart I found on the supplier's website showing the various strengths and weaknesses of different o-ring materials. I thought you might like to see that info in regards to these o-rings. NR is 'not recommended'.

    Last edited by Bullzeyebill; 07-14-2013 at 08:10 PM.

  2. #2

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I'll take 10 of each.

  3. #3
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    PM sent JMP. Thanks!

    As a side note, I tested these out today, and they fit great! I put two of the Viton rings on a Haiku and Mule and a nitrile ring on another Mule. I am trying to compare the two materials over time. But as to fit, they are the size Don uses and slide on perfectly.

  4. #4
    Flashaholic* RedLed's Avatar
    Join Date
    Oct 2006
    Location
    Beverly Hills, Palm Springs, Seattle
    Posts
    1,476

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I will take 5 of each, and PM sent.
    Check my Web Site: www.Redwayphoto.com

  5. #5
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Quote Originally Posted by RedLed View Post
    I will take 5 of each, and PM sent.
    PM replied to. Your rings should go out Monday as well.

  6. #6
    Flashaholic Dog Chaser's Avatar
    Join Date
    Sep 2006
    Location
    On the Eastern Shore of the Chesapeake Bay
    Posts
    301

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I'll take 10 of each. Thanks.
    "Please don't dominate the rap Jack, if you've got nothing new to say." - Jerry

  7. #7
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default

    Quote Originally Posted by Dog Chaser
    I'll take 10 of each. Thanks.
    Dog Chaser, your mailbox is full. Let me know when it's cleaned out and and I will resend my PM.

  8. #8
    Flashaholic Dog Chaser's Avatar
    Join Date
    Sep 2006
    Location
    On the Eastern Shore of the Chesapeake Bay
    Posts
    301

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    All clear. Sorry about that.
    "Please don't dominate the rap Jack, if you've got nothing new to say." - Jerry

  9. #9
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    JMP and RedLed, your orders have shipped.

    Dog Chaser, you have a PM.

  10. #10
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Dog Chaser, your pack will be shipped for sure Wed. I went by the post office today to get stamps, saw the line of people shipping presents, and had to pass as I would have been late for work. Tomorrow I have time to get there and ship for sure. Thanks.


    Still plenty of Buna and a few Viton rings left for those who need them.

  11. #11
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default

    Everyone's goodies are now in the capable hands of the USPS. If there is any problems please make sure to let me know right away. Thanks everyone.

  12. #12
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Bump, still plenty left.

  13. #13
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks


  14. #14
    Flashaholic* stoli67's Avatar
    Join Date
    Jul 2010
    Location
    Sydney Austalia
    Posts
    866

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Are there any left..... I will take 10 buna.... Any viton?
    Currently into SPYs....
    My Lights In Detail

  15. #15
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I believe I have 65 buna and 15 Viton left.

  16. #16
    *Flashaholic* easilyled's Avatar
    Join Date
    Jun 2004
    Location
    Middlesex, UK
    Posts
    5,629

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I'm waiting until you have some PTFE o-rings.
    Change is inevitable, except from a vending machine

  17. #17
    Flashaholic* stoli67's Avatar
    Join Date
    Jul 2010
    Location
    Sydney Austalia
    Posts
    866

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I will take 10 of each....

    Are those figures correct.... does not seem enough!

    0.75 + 0.3 + 1.1 = $2.15

    I am sure this is not correct ... can you PM me the total and I will PP today (BTW nbp I ordered the blue paracord ;-)
    Currently into SPYs....
    My Lights In Detail

  18. #18
    Flashaholic Muddquez's Avatar
    Join Date
    Jul 2008
    Location
    Bakersfield, CA
    Posts
    144

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I will take five of each.

    Thanks
    I'm a great believer in luck, and I find the harder I work the more I have of it.
    - Thomas Jefferson

  19. #19
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    2,419

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I will take 10 of each please. Thanks!!


  20. #20
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Quote Originally Posted by stoli67 View Post
    I will take 10 of each....

    Are those figures correct.... does not seem enough!

    0.75 + 0.3 + 1.1 = $2.15

    I am sure this is not correct ... can you PM me the total and I will PP today (BTW nbp I ordered the blue paracord ;-)
    PM sent. Congrats on the cool cord, you'll love it.


    Quote Originally Posted by Muddquez View Post
    I will take five of each.

    Thanks
    PM sent.

    Quote Originally Posted by nfetterly View Post
    I will take 10 of each please. Thanks!!
    After the previous two orders, I am out of Viton, plenty of buna left. Please let me know how you would like to proceed. Thanks.


    nbp

  21. #21
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default

    Stoli, your rings will go out Thursday.

    And just a reminder guys, the price listed above includes only shipping to the US. If you are elsewhere and want these, we will have to work out actual shipping cost and you will pay accordingly as it is higher.

    Stoli, don't worry about it on your order, I didn't catch it so my mistake is your bonus.

  22. #22
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    2,419

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Quote Originally Posted by nbp View Post
    PM sent. Congrats on the cool cord, you'll love it.




    PM sent.



    After the previous two orders, I am out of Viton, plenty of buna left. Please let me know how you would like to proceed. Thanks.


    nbp
    Let's go with 20 of the buna


  23. #23
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default

    Stoli, Muddquez, nfetterly: all your orders are in the mail.

  24. #24
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default

    Did you guys recieve your rings? I assume silence is good but I thought I'd ask.

    Some nitrile rings left if anyone is still interested.

    Also if there is interest in more Viton or other rings, I'd be happy to hear from you all as I would be willing to get more in stock to keep this rolling. Or also if there are other customs that people would like to have o-rings for, feel free to mention it and perhaps I could get some in other needed sizes. Just some ideas if there is enough interest to warrant it.

    Thanks all.

  25. #25
    Flashaholic* stoli67's Avatar
    Join Date
    Jul 2010
    Location
    Sydney Austalia
    Posts
    866

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I have not as yet....

    I did buy that blue paracord though ;-)
    Currently into SPYs....
    My Lights In Detail

  26. #26
    Flashaholic Muddquez's Avatar
    Join Date
    Jul 2008
    Location
    Bakersfield, CA
    Posts
    144

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    I received mine.
    Thanks Mucho!
    I'm a great believer in luck, and I find the harder I work the more I have of it.
    - Thomas Jefferson

  27. #27
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Muddquez, thank you for the update. Stoli, thank you as well, please keep me updated. I haven't a clue how long First Class mail takes to get down under.

  28. #28
    Flashaholic* stoli67's Avatar
    Join Date
    Jul 2010
    Location
    Sydney Austalia
    Posts
    866

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    mine arrived safe and sound.... cheers


    Which ones are better...... I will have to try one sort in one Haiku and one in the other ;-)
    Currently into SPYs....
    My Lights In Detail

  29. #29
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,584

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Sweet, thanks for the update bro.

    As to which are 'better', you can look at the chart I added to the first post showing the various strengths of the different materials and maybe that will help you decide. I think for most applications they are probably equivalent. I did the same though, putting the Viton on my Haiku and the nitrile on my two Mules, for comparison sake. So far they are both holding up very well and have given me no problems. I hope that others who have purchased from me are happy with them as well.

  30. #30
    Flashaholic* BenChiew's Avatar
    Join Date
    Nov 2011
    Location
    Malaysia/Ship to Portland, Oregon
    Posts
    3,095

    Default Re: #017 Nitrile and Viton O-Rings for McGizmo Clicky Paks

    Are these still available?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •