*Feeler Thread* HA-III EDC's

**cmacclel** · 12-17-2011, 09:04 PM

I have been contemplating of having a batch of my EDC series lights HAIII coated. Who would be interested? Cost would be around $20 additional.

Thanks Mac

My Personal XM-L EDC that has been carried everyday for the last 6 months (It was an SST-50 EDC before)

**cmacclel** · 12-17-2011, 09:05 PM

*Reserved*

**calflash** · 12-17-2011, 10:20 PM

What kind of colors would be available? I personally am tired of the traditional colors. I would however, consider an anodized light if it had a more exotic color like a molten orange or a deep red etc. I am not a fan of purple but the brilliant purple one for sale a while ago is along the lines I am thinking about.

Another subject is cost. Any ideas?

**egrep** · 12-18-2011, 01:51 AM

I bought that Violet EDC. I treasure it. I'd go for another for sure. triple this time. Molten orange? Deep red? Sound great! When can we get an idea about available colors?

But I think hat my violet is HAII to get such a color?

Originally Posted by calflash

What kind of colors would be available? I personally am tired of the traditional colors. I would however, consider an anodized light if it had a more exotic color like a molten orange or a deep red etc. I am not a fan of purple but the brilliant purple one for sale a while ago is along the lines I am thinking about.

Another subject is cost. Any ideas?

**coloradogps** · 12-18-2011, 06:58 AM

I would be in.

**cmacclel** · 12-18-2011, 07:08 AM

Originally Posted by calflash

What kind of colors would be available? I personally am tired of the traditional colors. I would however, consider an anodized light if it had a more exotic color like a molten orange or a deep red etc. I am not a fan of purple but the brilliant purple one for sale a while ago is along the lines I am thinking about.

Another subject is cost. Any ideas?

HA-III is either Natural or black and is one of the tuffest aluminum coatings available.

Mac

**CMAG** · 12-18-2011, 07:33 AM

HA-III Natural EDC neutral tint I'm in

**Barbarian** · 12-18-2011, 08:14 AM

I'm interested.

**nfetterly** · 12-18-2011, 08:24 AM

I would be very very interested - prefer HAIII Natural (particularly when it's a little uneven in appearance)

BUT - if you were going to get some parts HAIII coated I would be WAY more interested in a XML 18650 (style 2 - but open to style 1) Deep head.

I know there are too many options in this line to open up in general to HAIII coatings as I presume you will be sending these out, but if you're going to be sending out a batch, it would tip me into getting one. Ti is just a little too pricy in the larger lights (I've also committed myself to having fewer lights....)

**eala** · 12-18-2011, 11:13 AM

Would you offer the same service for the Tri's too? If so, I may bite. I like the finish on your personal light.

eala

**cmacclel** · 12-18-2011, 12:58 PM

Originally Posted by eala

Would you offer the same service for the Tri's too? If so, I may bite. I like the finish on your personal light.

eala

Yes both the XM-L EDC and Tri-EDC.

Thanks Mac

**CMAG** · 12-18-2011, 04:44 PM

Originally Posted by cmacclel

Yes both the XM-L EDC and Tri-EDC.

Thanks Mac

mac, can you cut a aluminum 26650 coated with the newer style Ti type pattern, to mach the Ti 26650 I ordered?
If so, I would be in for that and the EDC in natural

**grayhighh** · 12-24-2011, 05:14 PM

Interested !! Im in

**Vernon** · 12-25-2011, 12:38 PM

I'd be in!

**Policecar** · 01-07-2012, 09:09 PM

I would absolutely want a light in HAIII natural or black. Bare Al doesn't hold up so well.

**iflyjts** · 01-08-2012, 07:41 AM

I am in for a XM-L 26650 shallow head (neutral tint) in HAIII natural...

**whizdumb** · 01-09-2012, 04:40 AM

I think I'd finally bite the bullet and jump in on one of your XM-L EDCs if I could get it with a Black HAIII coating. Since I'd use it everyday and carry it wherever I went I think anodizing would be a better option for me then bare or cerakoted. Please keep us informed on this.

Thanks,
Whizdumb

**moeman** · 01-17-2012, 06:39 PM

I think this would be a very cool option!

**bmcgators98** · 01-18-2012, 05:27 AM

I would be interested in an EDC with HA option.

Thanks

**whizdumb** · 02-18-2012, 12:22 PM

Hate to resurrect the thread but I'm still interested to here about an anodizing option. Been holding out on an order until I know. Thanks in advance.

**jager22** · 02-18-2012, 12:59 PM

me too

**cmacclel** · 02-18-2012, 06:35 PM

There is not nearly enough interest at this time. I would need at least 50 lights for a batch of anodizing to make it worth it.

Mac

**moeman** · 02-18-2012, 07:14 PM

I am surprised there isn't more interest.

**seahunt** · 02-19-2012, 08:19 AM

Could we get older EDC's and/or Tri's done too??
I have several I could strip and send shell only.
Regards, Chuck

**cmacclel** · 02-19-2012, 08:36 AM

Originally Posted by seahunt

Could we get older EDC's and/or Tri's done too??
I have several I could strip and send shell only.
Regards, Chuck

Sorry that would not be an option.

Mac

**Jetpowered** · 02-21-2012, 12:54 PM

I'd be in for a Tri-EDC cool 2.8 ano.

**Orange Sunnyboy** · 02-23-2012, 03:33 AM

I'm definitely interested.

**JAYKAY75** · 03-11-2012, 06:59 PM

might be interested too if it's still an option sometime.

**gainground** · 03-18-2012, 07:40 PM

Been lurking here for a bit and I'd definitely be interested in a HA-III natural XM-L EDC. Or would you consider doing a batch HA-II in some of the more exotic colors?

**thaugen** · 03-24-2012, 03:49 AM

I am interested!

Thread: Feeler Thread HA-III EDC's

Thread Tools

Display