Vinhnguyen54 Run 5 Cree XML P60 Drop In 1000 Lumen, McClicky Switch

[vinhnguyen54]

OK Vinh, I'll take your advice and get the OP; so I'll take:

"Cool White T6 not the Warm XML" (-$15)
3,040mA
No mode memory
High, Medium, Moonlight (turns on in High, no matter which mode it was last turned off in!)
Textured Reflector or Orange Peel Reflector = Gorgeous beam
Thermal Injection by default
$45- $15= $30

PayPal to follow, thanks

I just want to clarify that you have to be in a mode at ON for longer than 1 second in order for it to revert back to High.
Example: Turn on light, immediately flip through modes and end up at Medium then turn off at medium right away. Next turn on will be moonlight.
Example 2: Turn on High for over 1 second then turn off. Turn back on you are at high.
Example 3: Turn on High flip to medium or moonlight for longer than 1 second then turn off. Turn back on you are at High

Basically you have to be in any mode for longer than 1 second in order to revert back to high at next turn on. If you are in a mode for less than 1 second then it will advance to the next mode at the next turn on.

"High, Medium, Moonlight (turns on in High, no matter which mode it was last turned off in!)

[naked2]

That's fine; I'm concerned with it coming on in high after I haven't used it for a time. I would never leave it in medium or moonlight for less than a second anyways.
Can you please send some free aluminum adhesive with the module? (when you finally get the OPs)

[vinhnguyen54]

I have no clue when i will get the OP. Usually I would have gotten them by now as I have placed the ordered for over 2 weeks. But may be the Lunar New Year affects the delay. Illumination Supply haven't gotten them either. If Illumination Supply gets them before I do I will order a few from them to fulfill immediate orders as they ship from the USA.

That's fine; I'm concerned with it coming on in high after I haven't used it for a time. I would never leave it in medium or moonlight for less than a second anyways.
Can you please send some free aluminum adhesive with the module? (when you finally get the OPs)

[naked2]

No problem; I'll be patiently waiting!

[vinhnguyen54]

Warm emitters sold out. But will be in a week.

[vinhnguyen54]

950Lumen Headlamp ;-)
http://www.candlepowerforums.com/vb/showthread.php?332776-vinhnguyen54-Spark-Headlamp-950-Lumen-at-3.42A-with-XML-U2-)&p=3872131#post3872131

[xml]

on the 3040ma driver with NO memory and moon mode!!!

[vinhnguyen54]

on the 3040ma driver with NO memory and moon mode!!!

Some people hate the moon mode but I love it! I also hate disco modes but this drivers sequence makes me want to keep them all on my personal lights :-)

[psychbeat]

Hi/moon 2 mode would be pretty awesome too.

[vinhnguyen54]

OP reflectors are in :-)

[shilent]

Has anyone done any tailcap current measurement with their 4200ma drop ins? I'm wondering if these would be bad for Solarforce tailcaps.

Sorry for duplicate posts.

[shilent]

Delete please.

[shilent]

delete please

[Diablo_331]

Has anyone done any tailcap current measurement with their 4200ma drop ins? I'm wondering if these would be bad for Solarforce tailcaps.

Sorry for duplicate posts.

I've used these dropins on the stock L2x clicky, L2t forward clicky and the s7. They all handle the current fine. YMMV.

[vinhnguyen54]

I have McClicky(s) for sale too for anyone who wants to upgrade their lights.

I have 6 Neutral T5 5000K LEDs in stock if anyone is interested in this tint.

Cool White U2 and Warm XML are still coming in the mail

[naked2]

How much for the McClickys with shipping?

[BarryH]

I would be interested adding one or two McClickys to the shipment when you finish building my Neutral T5 5000K drop in.

[vinhnguyen54]

How much for the McClickys with shipping?

McClickys are $7/each shipped! :-)

[yifu]

Second time buying! I'll take a 2.7-4.5v XML U2 drop in with 3.74A, mode 6 no memory (High, med, 2hz) with smooth reflector and international shipping! Please check PM for shipping address as i changed houses. Total is 52USD, Paypal gift ID is 30A292881Y930880B!

[vinhnguyen54]

Second time buying! I'll take a 2.7-4.5v XML U2 drop in with 3.74A, mode 6 no memory (High, med, 2hz) with smooth reflector and international shipping! Please check PM for shipping address as i changed houses. Total is 52USD, Paypal gift ID is 30A292881Y930880B!

Thanks!

[vinhnguyen54]

I kinda just built/mod a D36 XML prototype. I do not have a D36 host to test fitment. Does anyone have a D36 host and want to test out this drop in? If yes give me your address and I will send the drop in to you for testing. Please let me know. Thanks!

[ykb]

Hi Vinhnguyen54,
May I take two McClickys, please?
Thanks,
ykb

[naked2]

I kinda just built/mod a D36 XML prototype. I do not have a D36 host to test fitment. Does anyone have a D36 host and want to test out this drop in? If yes give me your address and I will send the drop in to you for testing. Please let me know. Thanks!

Vinh, I have a LumensFactory D36 turbohead that will fit any of my 6P hosts; I would love to test your prototype! What are its specs? You have my address from my order I shipped on Monday. I will also send paypal for one McClicky.

Edit: included my address in PP note just in case.

[vinhnguyen54]

Cool,

I just put together everything but haven't finalize the driver part. I will finish it today and send it to you to test. It will be driven at 4.2A on High so make sure you have a decent switch. :-)

Vinh, I have a LumensFactory D36 turbohead that will fit any of my 6P hosts; I would love to test your prototype! What are its specs? You have my address from my order I shipped on Monday. I will also send paypal for one McClicky.

Edit: included my address in PP note just in case.

[nMotion96]

I have a Solarforce L2 coming and i'm going to be using 18650 cells.

This is what i'm currently looking at
-multi-mode current & low voltage option
-neutral 5000k
-3040mA
-last mode memory
-moonlight, medium, high
-textured reflector

Would this run fine in the solarforce. Should i go with 3040mA + 350mA*3 = 4090mA? Would it be a noticeable difference in brightness?

[ykb]

Hi Vinhnguyen54,
May I take two McClickys, please?
Thanks,
ykb

Hi vinhnguyen54,
Thanks for adding two McClickys to my order.
I'd like to order two more please, if there's some remaining
Cheers,
ykb

[vinhnguyen54]

Hi vinhnguyen54,
Thanks for adding two McClickys to my order.
I'd like to order two more please, if there's some remaining
Cheers,
ykb

Sure I will drop in 4.

[vinhnguyen54]

The setup you have below is fine with a Solarforce L2. SF switches are typically rated up to 3A although they seem to survive 4.2A fine so far. If you want to ensure 5A of current you can buy a McClicky from me too for an additional $4.

3040mA = 880 Lumen +/- 10%
4090mA = 990 Lumen +/- 10%

According to this chart here:Click Here
Please note the LED tested in the chart is a T6 not a U2 bin.

I have a Solarforce L2 coming and i'm going to be using 18650 cells.

This is what i'm currently looking at
-multi-mode current & low voltage option
-neutral 5000k
-3040mA
-last mode memory
-moonlight, medium, high
-textured reflector

Would this run fine in the solarforce. Should i go with 3040mA + 350mA*3 = 4090mA? Would it be a noticeable difference in brightness?

[jamie.91]

How much for mcClicky switch posted to UK?

[ykb]

Sure I will drop in 4.

Hi vinhnguyen54,
Payment sent for 4 x McClicky switches.
Thanks again,
ykb