Thanks guys! I'll put out my order there.
Thanks guys! I'll put out my order there.
What do you mean they blew up the death star.......... Wait....What the hell is an Aluminium Falcon?
Considering I grew up thinking an orange Photon micro light was amazingly cool, and before that finding the Minimag to just be the ultimate (the solitare always kinda s_cked), I know what you mean.
The SC600 is cutting edge. Most efficient emitter with the most lumens in one spot (sst90, hush), driven by a circuit as efficient as anything out there (barring some custom light that might have a small edge), heatsinked *as well as anything (that isn't bigger). *That it is 800lm max and the runtimes are set by the format, but I wouldn't call multicell multiLED lights more "cutting edge". Not better tech, just more of the same level of tech. *The 3100 batteries are about the most advanced we have at the moment, too. The UI is tied amongst the best in the business. Some may need tail clickies, but those are not advanced tech.*
The coolest part is that this time it's (backorders aside) easily commercially available and not a limited multi-$100 custom or limited edition.
If you're blown away I'd say it's because it really is that amazing. It does mean you can navigate the house in the dark and not have to bother looking for the light switch. Just tailstand the light and... the room is lit. Or, outside, the yard, the road, the woods are... lit. *The whole thing in front of you not just a bit.
I had a Yezl XM-L when the emitter first came out so I knew it could be bright, but by and large the flat regulation and brightness control in a tiny but still basically sufficient for heat sinking package is just amazing.
I do wish I could EDC it instead of a 1xAAA Fenix, but, hey, it's the 2012 tech "minimag" not the photon or solitaire.*
So the SC600 as an EDC is ok, not great because it's size it's just a little too big to carry with jeans but I find that if I clip it to the outside of my belt works great (I know it could get scratched) on the other hand I was on a film set today and the director was quite surprised about how much punch the little light had, thinking about getting a SC600w as a back up.
Sent from my iPhone using Tapatalk
My SC600 just arrived. Personally I like the cool tint better than the neutral tint of my SC600w. And, compared to my HDS rotary 200 the SC600 leans more to the neutral side of the tint spectrum, so it is not a pure cool white tint.
After using my SC600w for a little while now, I can say that this is the coolest flashlight I have ever owned! I just can't help picking it up, fondling it and playing around with it. Everything about the UI, look and feel of the light is nothing short of amazing. However it is not all perfect.
After using the light in indoor and outdoor settings under various lighting sources (and pure darkness) I have come to the conclusion that the tint is actually much greener than I would prefer (yes, it is a 600w neutral version). For whatever reason it took several days for my eyes to truly pick up the green hues in the tint, now when I look at the light, it looks extremely green (although it really isn't that bad, but my brain exaggerates it for whatever reason).
In an effort to combat the green I decided to use some filters to clean it up a bit (not my ideal solution, but it does work). At first I tried the eighth minus green filter which is a light magenta flavor (lee filters), and this seemed to be perfect. But after using that for a day or so, my eyes adjusted and the green tint reappeared with a vengeance as if I wasn't even using a filter (the brains ability to compensate is a strange thing).
Now I started using the quarter minus green and it seems to be holding back the green enough so where I can only detect it on a minuet and tolerable level (only the lowest of lows tends to have green now). Granted the light is now a bit pink on the higher modes, but it actually looks pretty cool, reminds me of using sunglasses with pinkish/rose colored lenses, which tends to make things really pop out. Also using this much magenta seems to have had a very positive effect on the CRI of the light, colors really pop now (especially yellow and reds) and things look cleaner and have better contrast.
I am going to do some more tests in an outdoor setting tomorrow, as unfiltered the light is far to yellow for my tastes when using on green plants and grass. Hopefully my new magenta infused light will bring a more natural color to an outdoor setting without things appearing too yellow or green.
But greenish tint or not, this light is worth every penny, I only wish I could buy several more in every available tint! (could you imagine a high CRI version!!)
Fenix L2D Q5, Nitecore D10, Eagletac P100c2, Zebralight H501, iTP A3 EOS Single Output
Is it normal for the beam to have a slightly warm center (hint of green), with a slightly purple spill beam? It's not really that bad. Certainly not enough to bother me, but is that normal considering the shallow reflector?
"Success usually comes to those who are too busy to be looking for it."
This is my signature. They're many like it but this one is mine..
This is my signature. They're many like it but this one is mine..
Its amazing how this thread has become so inactive since everybody started receiving their lights. I guess that is what happens when hype dies off, as we really don't have much more to talk about. Interesting thing as I was browsing ZL's website light night, they actually had the SC600w in stock for a short period of time! So I guess the backorders have finally caught up to the point where they have some extra in stock after fulfilling the preorders. Didn't last long though, so the demand is still there.
Sadly despite my love for this light, I have gotten to the point of being 100% unsatisfied with my SC600w tint. It started off being a nice tint with only a slight hint of green, now after playing with some filters I now notice how very green the tint really is, and it bothers me very much. I no longer am able to use it unfiltered without noticed the green undertones.
I think I am done with XM-L lights until they can make them better, as the XM-L's have the absolute worst tint variation between hotspot and spill I have ever seen in a flashlight. My SC600w has a magenta tinted spill, leading into a green corona, then slowly blending into a very yellow hotspot. This is not a pretty tint change which looks quite ugly, and because of all the yellow, makes the light seem really green.
I have however been experimenting with filters and other things to try and smooth out the spill to hotspot variation, I have come up with a few interesting findings that I will share if I can perfect them. Basically I am trying to devise a way to change the individual tints in the beam profile without impacting the entire beam (like a single filter does).
One fun thing I have found out is that directly controlling the tint of the corona (and only the corona) is very possible, however the spill and inner most hotspot seem to share the same area of output from the lens, so that is going to be more difficult to tackle. But just being able to change the coronas tint has made a pretty big difference in the beam quality coming from this light, as it is possible to make the spill and hotspot transition more fluid and not so abrupt.
I have much more experimenting to do and will keep updated if I can find anything of good and practical use.
I painted my walls green, now I can just go out and enjoy a nice flashlight without worry.
I'd love to join the discussion but I need to receive my replacement first. It was a Christmas gift that was sent back (stepdown issue) and asked for a return or replacement in the middle of December. Communication was not very good declaring if there would be a refund or replacement. I should have had my light a few days ago so I will probably contact them tomorrow. Maybe it was shipped from China and it is stuck in customs or they are busy with all the orders.
Last edited by TyJo; 01-17-2012 at 04:38 PM.
Thanks to this thread, I am now completely confused on whether to get the sc600 or sc600w.
First post - hi everyone!
So, after lurking/researching for awhile I realized it was ridiculously inefficient to just keep hoping the answers to my questions would come up...
I really like the idea of this light (I have and edc an SC51w), but am trying to get a more concrete idea about the SC600w's throw and tint. I like the SC51w's tint (though I donít like that it does have some green), but I do wish it had more throw.
I go on nightly walks and am looking at the SC600w to use mainly in that role. While I prefer the dark, and don't use any light 98% of the time, I have occasionally wished I had much more reach than the SC51w can provide.
Anyone with both lights, in regard to tint and throw: how do they compare? The less bright XP-G equipped SC51w vs. the (hugely) brighter XM-L in the SC600w.
Am I going to be blown away if I go ahead and upgrade to the SC600w?
I prefers flashlight with Cool while headlight in floody high CRI
Currently have H51Fc & H31Fw, love the UI while patiently waiting for H602w.
Btw, I might be picking up one SC600 soon, it stated "Built-in over-discharging protection with 2.7V cutoff" & "One 18650 size up to 67mm long", so my guess is go with unprotected 18650 instead of AW's protected am I right ? Would it take Panasonic 3100mAh 18650 ?
I also ordered a SC600w from hkequipment. This will be my first neutral light so am eagerly awaiting it. Ordered it at 3pm and they shipped it at 8pm
For batteries I ordered both the $43.50/pair (YIKES ) Redilast 3100's and some $8.41/pair Ultrafire "flame" 4250's! I also picked up a super cheap ($2.84) single cell charger from the same place with the Ultrafire's, I guess I'll save the LOL's for after I test it
Add me to the list of 'I'm now not sure what I want'.
I have gone from knowing that I want to order a SC600w next month, to now not knowing if the SC600 might be the better choice. I know, I know I should buy both, but these aren't exactly cheap lights and my money isn't disposable.
The tint on my H51w is generally great, it's warmer than what I would call neutral though. At lower brightness settings however (if I am being brutally honest and I'm shining it on a white surface + looking out for it) it does have a very slight touch of green. This is mostly due to tint shifting as it only really becomes apparent on the lower brightness settings.
I also own a H51 which sits there gathering almost dust. If I accidentally pick up the H51 I will put it down in favour of the H51w. So maybe that answers my question, the 600w is for me. But these reports of a green tint are worrying.
To people that are complaining of a green tint: is this noticeable on turbo/high? If it is only noticeable on the lower settings then to me it is kinda forgivable.
Last edited by Trancersteve; 01-18-2012 at 03:31 AM.
I have the SC600w. I am surprised at how floody it is. It’s a great light but I like my Fenix PD31 better. I think I would have been happier without the w tint. Now I want a thrower for those distant possible cave passages that I can’t get to with ease. I ordered the Redilast 3100 because many other CPF members said they would fit.
I have the SC600, SC600W and H51W. Output on the SC600W on medium is fairly close to the H51W on high but also has a lot more "green" overall. The SC600 is brighter on medium than the H51W on high with a whiter hotspot and greener corona. The H51W is a creamy white throughout.
On high obviously both the SC600 and SC600W blows away the H51W in output/throw.