Foursevens Preon P0

[Hoosier Light]

I keep checking CPF for news of the new light. Assume that whenever 4Sevens puts it out in Las Vegas one of you guys will be there and will fill us in on all the specs immediately.

[shelm]

hey people, it is not hard to guess that a titanium version will follow. The current name is "Preon P0-SS" instead of "Preson P0". What does that mean? It means that some other material version will be available "Preon P0-Ti" maybe??
4Sevens lights and Titanium. Often seen before. Even on the Preon series.

i am gonna get the Titanium version if you people like the stainless

i guess that weight matters more than size or am i wrong. If the light is under 10grams (iTP A3 is 9grams), then it cant be beaten. Klarus stainless is 18grams (11grams for MiX5).

[jag-engr]

The current name is "Preon P0-SS" instead of "Preson P0". What does that mean? It means that some other material version will be available "Preon P0-Ti" maybe??

With the Preon ReVO, there was the Preon ReVO and the Preon ReVO SS. So the alternative may not be titanium, but plain aluminum. I suspect that a titanium light may be too far outside of the price point for this light.
Of course, if the light sells well enough, I'm sure anything is possible. Personally, I tend to prefer aluminum lights for weight, but, in this size, I'm not sure that it matters.

[jorn]

If it's as small as i think it it, then i wouldent like a alu version.
The tube on my (ss) DQG II are leaf thin, imo way to thin for a alu construction. If the P0 comes close in size, it might have really thin walls. Time will tell.
Another waiting game has begun

[roadkill1109]

Cool! and a new logo to boot!

[Woods Walker]

All I see is a box and a "teaser" so why would I be in? I would need more info and maybe some CPF reviews. Just sayin.....

[CarpentryHero]

I believe the entire 4sevens line-up uses either the standard or tactical UI. I can't think of a 47's light off the top of my head that uses a different one. My expectation is that this will have the same UI as the Preon Revo.

It's already been mentioned that this uses a power LED so I'm curious to see if they've finally dropped the reflector and made a mule-style head. That would certainly shave length off and make the light smaller. It would also differentiate this offering from their existing 1xAAA Preon.

I'd be up for a mule style preon to cut down length

[moshow9]

All I see is a box and a "teaser" so why would I be in? I would need more info and maybe some CPF reviews. Just sayin.....

Well it's current regulated, SS, looks to have 2 modes and will be under $25. While I would like to know the emitter and runtime, my interest is piqued and I will be happy to give one a shot.

[Woods Walker]

Well it's current regulated, SS, looks to have 2 modes and will be under $25. While I would like to know the emitter and runtime, my interest is piqued and I will be happy to give one a shot.

I will be happier to read the reviews and then decide if this gear item is for me.

edit.

I do like the price point and SS for a very small pocket light.

[shelm]

the new website is located at
http://www.foursevens.com/product-detail.html

[ico]

The website request for a username and password

[Scubie67]

Does SS stand for Stainless Steel?

[smokelaw1]

Hit cancel twice and it will take you to the site. However, that does not seem to get you to a fully operational site.

[MCN]

Any word from the show about a delivery date?

[Beacon of Light]

Do we know any details on this light yet? For those that have been at the SHOT show and actually held one or looked at the packaging, could they release some info or is it under sort of a gag order from 4Sevens until they decide to release details? Just anxious to see what this looks like on paper.

[The Shadow]

Hit cancel twice and it will take you to the site. However, that does not seem to get you to a fully operational site.

Yeah, it looks like they're still building the new site. I couldn't find the Preon P0-SS on there either.

I must admit, this new light has my interest. I gave up on waiting for the E01 Killer they were supposed to debut at last year's show, but this light might serve that purpose. There's a thread on this light over at the Marketplace, but that site is down again. Let's hope the specs are released soon.

[jag-engr]

Check out SwissBianco's pictures from the 4sevens Shot Show press release (link). In one of the pictures, it seems that David is holding up the light next to the battery - they are almost the same size!

Judging by the pictures in which the light is turned on, it seems the light may have only two levels!

[shelm]

Check out SwissBianco's pictures from the 4sevens Shot Show press release.

tiny'ed the url to

http://tinyurl.com/72w8mhs

[calipsoii]

Check out SwissBianco's pictures from the 4sevens Shot Show press release.

Link pls

Edit: thanks! Seeing it compared to the AAA battery, I stand by my reflector-less guess.

[jag-engr]

Link pls

Sorry about that.

Seeing it compared to the AAA battery, I stand by my reflector-less guess.

I think you're right that it won't have a reflector, but I think that it will have an optic - like the DQG Tiny Light and Fenix E05.

[jag-engr]

If it's as small as i think it it, then i wouldent like a alu version.
The tube on my (ss) DQG II are leaf thin, imo way to thin for a alu construction.

I got one of the first runs of DQG Tiny Lights, and mine was aluminum. I was very thin, but it held up fine. Of course, the natural ano on the aluminum DQG lights is amazing. A typical ano, especially a black ano, would not hold up as well.

[Hoosier Light]

Do we know any details on this light yet? For those that have been at the SHOT show and actually held one or looked at the packaging, could they release some info or is it under sort of a gag order from 4Sevens until they decide to release details? Just anxious to see what this looks like on paper.

Yes, please, you who have seen it let us know.

[Onthelightside]

Nutnfancy was there yesterday. Keep an eye on his page for a booth review.

[shadeone]

swissbianco has closeups on his facebook page now including the back of the box... high = 25 lumens, low = .25 lumens
XPE

[OCD]

Here is a working 4Sevens Link. One posted previously worked if you deleted everything after the .com.

[jorgen]

That's very close to the output I was hoping for from the Thrunite TI. I'm in.

[RedForest UK]

That GITD in the lense looks great, if they can guarantee centering the LED that well then I'll have to get one. The wide angle of the TIR looks like it'll give a really wide floody beam too.

[jtrucktools34]

Pre-Order is OPEN!!!

It's on the old 4sevens site at the bottom of the Preon Page!

Happy Shopping!

Jtruck

[stickx]

I was really hoping for something special. But per the 4sevens site it is a 2 mode twisty with:
Low: 0.25 OTF lumnes (120 hours)
High: 25 OTF lumnes (1.5 hours)

I was expecting more in range of 80 lumens on high. And it has a magnet in the base which is fine unless you carry it near cards with magnetic strips on them like I do - the magnet screws with the magnetic strip. I like the DQG II much better, especially with the GITD tail.

[MCN]

Just ordered one. What can I say -- I couldn't resist.