Acebeam
Page 1 of 4 1234 LastLast
Results 1 to 30 of 99

Thread: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

  1. #1

    Evilgrin07 AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Okay, I just wanted to stir up a frenzy. I hope These clips are already cut and tumbled, I just need to machine some jigs to get all of them properly bent. These should go on sale some time this week. Don't forget to check back!

    These clips WILL NOT fit the older titanium Eiger.

    These clips are "semi-compatible" with the "new" style QTC plunger. The new plunger is shorter and the added thickness of the clip will prevent the plunger from depressing fully and delivering 100% power. Here is a link where you can see and purchase the different plungers (I have no commercial affiliation).

    Jason

    Ti clip for HDS Clicky: MSRP $25.00 (click to purchase)



    Ti Clip for Peak Eiger: MSRP $20.00 (click to purchase)



    Last edited by archer6817j; 07-26-2012 at 07:37 AM.

  2. #2
    Flashaholic* S1LVA's Avatar
    Join Date
    Apr 2011
    Location
    Rhode Island
    Posts
    734

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Well done. Count me in!

    S1LVA
    I used to be afraid of the dark. Now, the dark is afraid of me.


  3. #3
    Flashaholic* AnAppleSnail's Avatar
    Join Date
    Aug 2009
    Location
    South Hill, VA
    Posts
    3,979

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    A question me and a few dozen rotary owners or soon-to-be owners want to know: Will this delicious clip work with the HDS Rotary? Thank you,
    My biggest light-hog is my camera.

  4. #4

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    I notice a lot of space at the top of the Eiger clip. Will it fit on an El Cap or Logan?

  5. #5

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Nice Mr. Archer6817j! I just (hope you don't mind) posted a link to your thread in the HDS #16 on going thread!

    However, now you had to go an post this thread!

    Because (since I didn't see a responce in your clip thread in regards to making a clip that would fit an HDS) I recently purchased the Deco Clip from HDS. It's nice an all, but since the bend at the end is not curved up enough, I have to lift the clip when pocketing the 170T. After a few nights of that, I took it off!

    If I didn't buy that one (that's presently sitting with the other stock HDS clip in a zip lock bag) I could've bought two of these instead of just one! ....... Sheeez!!!!!!


    Last edited by AZPops; 02-06-2012 at 11:22 AM.

  6. #6
    Flashaholic* CarpentryHero's Avatar
    Join Date
    Jul 2010
    Location
    Edmonton
    Posts
    2,829

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    that's a good looking hds clip, I'll want one for sure
    I'm glad I found CPF, I was beginning to think I was strange
    I'm a Canadian and a proud Flashaholic
    Thanks CPF, thanks Think2x

  7. #7
    Flashaholic someguy4747's Avatar
    Join Date
    Jun 2011
    Location
    New Mexico
    Posts
    118

    Default

    Quote Originally Posted by AnAppleSnail View Post
    A question me and a few dozen rotary owners or soon-to-be owners want to know: Will this delicious clip work with the HDS Rotary? Thank you,
    +1
    I sometimes use lights to make my photographs.

  8. #8

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by AnAppleSnail View Post
    A question me and a few dozen rotary owners or soon-to-be owners want to know: Will this delicious clip work with the HDS Rotary? Thank you,
    I also have an HDS rotary and unfortunately this clip will not fit the rotary since there is no flange and no way to unscrew the tailcap. Sorry!

  9. #9

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by AZPops View Post
    Nice Mr. Archer6817j! I just (hope you don't mind) posted a link to your thread in the HDS #16 on going thread!

    However, now you had to go an post this thread!

    Because (since I didn't see a responce in your clip thread in regards to making a clip that would fit an HDS) I recently purchased the Deco Clip from HDS.
    What the heck is a decorative pocket clip?

  10. #10

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by calipsoii View Post
    I notice a lot of space at the top of the Eiger clip. Will it fit on an El Cap or Logan?
    No idea on that one. I only have an Eiger. If the el cap and logan use the same threaded keychain insert then there is a chance that it would fit. If anyone in the Bay Area wants to bring me lights to check I'll give them a free clip if it fits

  11. #11
    Flashaholic* AnAppleSnail's Avatar
    Join Date
    Aug 2009
    Location
    South Hill, VA
    Posts
    3,979

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by archer6817j View Post
    I also have an HDS rotary and unfortunately this clip will not fit the rotary since there is no flange and no way to unscrew the tailcap. Sorry!
    Okay, thanks for the quick reply. If I do get a clicky, I'll remember this clip.

    By the way, would that Peak clip work on my Vesuvius? I presently keep it on my keychain, but I'd get a quick-release carabiner to get more joy from it if it had a clip to help keep it from wandering off. The Vesuvius has a threaded hole in the back to swap the momentary switch for the keychain carry end, which I believe is similar to the Eiger's. Can anyone confirm this similarity? If so, I'm likely buying a clip from you.
    My biggest light-hog is my camera.

  12. #12
    gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    4,433

    Default

    I would buy a few if I can get Logan or el cap size.

  13. #13
    Flashaholic
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    160

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    How many mm is the opening of HDS clip? Curious if it would fit Novatac lights.

  14. #14
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,088

    Default

    Will you re-post here, when these are available?

    I would be interested in the Peak clip, especially if compatible with Logan/El Cap....
    IF 2 = 1 THEN 1 = 0

  15. #15

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by archer6817j View Post
    What the heck is a decorative pocket clip?

    Jason,

    Stock Clip that comes with the Clicky (but you can buy it as an accessory as well):




    Henry's newly listed (in his "Accessories for the EDC Clicky" page) optional "Black Decorative Pocket Clip" (similar design (or it could be the same) as moddoo's pocket clip):





    Notice how low the bend is on the lip? When I used it, I had to lift the clip with my thumb and index finger before clipping it to the front jean pocket.
    Last edited by AZPops; 02-06-2012 at 05:45 PM.

  16. #16
    Flashaholic*
    Join Date
    Apr 2008
    Location
    Cleveland,Oh
    Posts
    1,988

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Could you add a hole in the upper part of the Eiger clip for a split ring attachment?
    Great spirits have always encountered violent opposition from mediocre minds.
    -- Albert Einstein

  17. #17
    Flashaholic* stoli67's Avatar
    Join Date
    Jul 2010
    Location
    Sydney Austalia
    Posts
    866

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    They look great..... been waiting for the Moddoolar ones but who knows when they will arrive.....
    Currently into SPYs....
    My Lights In Detail

  18. #18
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,514

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by archer6817j View Post
    I also have an HDS rotary and unfortunately this clip will not fit the rotary since there is no flange and no way to unscrew the tailcap. Sorry!
    You probably could put it under the bezel. I did that with a Moddoo clip on my original Twisty.

    Quote Originally Posted by archer6817j View Post
    What the heck is a decorative pocket clip?
    Moddoo's clip. I don't see why people would have a problem using this clip. They are a bit stiff, but unless you are trying to clip it on really floppy fabric, you shouldn't have too much of an issue.


    Not to derail the thread, sorry Jason. Anyways, your clips look very nice, I would interested in one for my Clicky that is without Moddoo clip. This one is nicer looking than the stock clip, and more Ti is always better.

  19. #19

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Looks good I will buy a couple for Peaks. May I suggest you post in the Peak forum when they are for sale.
    Last edited by jorgen; 02-06-2012 at 07:58 PM.

  20. #20
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,088

    Default

    Any chance of anodizing, or some detailing ?
    IF 2 = 1 THEN 1 = 0

  21. #21

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by eg1977 View Post
    How many mm is the opening of HDS clip? Curious if it would fit Novatac lights.
    If the Novatac is a Surefire clone then my standard clips should fit. I don't remember the sizing off hand, but maybe someone with a Novatac can tell us if they are clones...size wise at least

  22. #22

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by jabe1 View Post
    Could you add a hole in the upper part of the Eiger clip for a split ring attachment?
    If these are popular enough I'd consider it, but it's too late for this batch. I got myself into a small hole on the LF2XT clips I did by offering two styles...I have a lot (of both) left. Maybe next time

  23. #23

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by archimedes View Post
    Any chance of anodizing, or some detailing ?
    Flame coloring will be a $5 option like on the rest of my clips

  24. #24
    Flashaholic
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    160

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Novatac lights look similar to HDS. I need the opening to measure at least 24mm.

  25. #25

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by eg1977 View Post
    Novatac lights look similar to HDS. I need the opening to measure at least 24mm.
    I added dimensions to the 1st post

  26. #26
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,148

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Looks better than either of Henry's offerings, nicely done.

  27. #27

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by archer6817j View Post
    I also have an HDS rotary and unfortunately this clip will not fit the rotary since there is no flange and no way to unscrew the tailcap. Sorry!
    Jason, I PMed you, but since you said you have a Rotary as well, can you unscrew the bezel and see if your clip will work there, at least for bezel up carry? It'd be better than nothing for the Rotary.

    See if it would work here:

  28. #28
    Flashaholic* moeman's Avatar
    Join Date
    Jan 2003
    Location
    St. Louis, Missouri
    Posts
    786

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Crap! I am in for one of the HDS clips and at least one of the Peak Eiger cips, maybe two!
    "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin

  29. #29

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Starting an order list?
    I need a hds clip bad!

  30. #30

    Default Re: TEASER: HDS and Peak Eiger Ti Pocket Clips (available soon)

    Quote Originally Posted by Mtbmurf View Post
    Starting an order list?
    I need a hds clip bad!
    No list, I'll post here when they become available for direct purchase on my website. Should be ready before the week is out

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •