Foxfury Scout
Page 3 of 4 FirstFirst 1234 LastLast
Results 61 to 90 of 99

Thread: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

  1. #61
    Flashaholic* scout24's Avatar
    Join Date
    Dec 2008
    Location
    NY, Penn's Woods
    Posts
    3,095

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Take a look at the pictures in the first post of this thread, specifically the Eiger clip. It attaches under the threaded momentary plunger, or keychain attachment. The hole, however, is a bit bigger than the size that would be needed for the 1/4-20 sized bolt that would facilitate attachment to a Titan or Tasklight. A smaller hole in the clip would allow secure attachment to a Titan, allowing my favorite SF to be clipped to my pocket, where it belongs. Perhaps if enough interest is there,, some clips in the next run could be made with the smaller hole... Never hurts to ask and see if there's interest!

  2. #62

    Default

    Quote Originally Posted by scout24 View Post
    Take a look at the pictures in the first post of this thread, specifically the Eiger clip. It attaches under the threaded momentary plunger, or keychain attachment. The hole, however, is a bit bigger than the size that would be needed for the 1/4-20 sized bolt that would facilitate attachment to a Titan or Tasklight. A smaller hole in the clip would allow secure attachment to a Titan, allowing my favorite SF to be clipped to my pocket, where it belongs. Perhaps if enough interest is there,, some clips in the next run could be made with the smaller hole... Never hurts to ask and see if there's interest!
    Ahh...gotcha now. That would be cool to have a pocket clip for the Titan. I'd buy one for each of mine....and I still think you need to swap me one of your high CRIs for one of my stockers.

  3. #63
    *Flashaholic* nbp's Avatar
    Join Date
    Dec 2007
    Location
    Wisconsin
    Posts
    5,566

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by chris975d View Post
    Ahh...gotcha now. That would be cool to have a pocket clip for the Titan. I'd buy one for each of mine....and I still think you need to swap me one of your high CRIs for one of my stockers.
    Can always send it to DaFab or one of the other guys for some treatment.

  4. #64

    Default

    Quote Originally Posted by nbp View Post
    Can always send it to DaFab or one of the other guys for some treatment.
    Can DaFab open the original Titan? I know he can do the aluminum T1A, but I already have that modded to a high CRI Seoul by Milky. I need the original titanium Titan modded, and the only one I know that can do that for sure is JHanko. But he's not around anymore, and Scout has the market cornered on the JHanko modded Ti Titans.

  5. #65

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Two of the clips I ordered for my Peak lights arrived today. I have fitted the clip to the Eiger and the other to the Logan. Perfect. Thank you for providing the clips. My third clip should arrive next week and then I will start saving to order another Logan - CW XP-G this time I think.

  6. #66
    Flashaholic*
    Join Date
    Mar 2009
    Location
    USA
    Posts
    506

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    My Titanium HDS clip arrived this week and it fits my HDS perfectly. This clip is well made and the perfect complement to my HDS 140 Clicky! Well done and thanks for making these clips!

  7. #67

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Edit: NM found link

  8. #68
    Flashaholic diesel79's Avatar
    Join Date
    Nov 2011
    Location
    Minnesota
    Posts
    248

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Those HDS clips look sweet. Gonna need one soon.

    Edit: Got a clip. Awesome!
    Last edited by diesel79; 03-25-2012 at 08:52 AM.

  9. #69

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Got my Eiger clip installed! The twisty head works fine, but now my momentary plunger will not activate my light.
    Anybody have an idea what to do to make the plunger work??? thanks

  10. #70

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    There are two versions of the momentary switch. The old one with longer plunger and the new one which is shorter. You need the old switch.

  11. #71

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Thanks for the response.
    I must have the new switch and getting an old one is probably not going to happen.
    If I unscrew the brass plunger a bit the o-ring gets exposed.
    Maybe a possible fix is to grind the body down the thickness of the clip. Is there a better solution ?

  12. #72
    Flashaholic* archer6817j's Avatar
    Join Date
    Aug 2010
    Location
    Mountain View, CA
    Posts
    725

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by tigman_tim View Post
    Thanks for the response.
    I must have the new switch and getting an old one is probably not going to happen.
    If I unscrew the brass plunger a bit the o-ring gets exposed.
    Maybe a possible fix is to grind the body down the thickness of the clip. Is there a better solution ?
    Hey tigman, thanks for bringing this up. I was not aware there was an issue with "old" and "new" plungers. I bought my eiger a few months ago and it seems to work fine. Do you have any way to take precise measurements on the length of the plunger? The brass part just screws into the thumb button. If I knew the overall length I might just be able to make a longer version of the plunger. Personally, I find I don't use the plunger any more. I just find it too difficult to keep in a constant output state. I'd swap in the lanyard ring if I could only remember what I did with it

    It might be worth getting in touch with Peak to see if they have any spare parts. It's just a little screw in brass do-dad so they may have a bucket of old plungers sitting around.

    Cheers,

    Jason

  13. #73
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,174

    Default

    Quote Originally Posted by Harry999 View Post
    There are two versions of the momentary switch. The old one with longer plunger and the new one which is shorter. You need the old switch.
    Quote Originally Posted by tigman_tim View Post
    ....
    I must have the new switch and getting an old one is probably not going to happen....
    Quote Originally Posted by archer6817j View Post
    ....
    It might be worth getting in touch with Peak to see if they have any spare parts. It's just a little screw in brass do-dad so they may have a bucket of old plungers sitting around.

    Cheers,

    Jason
    I think Bob at RMSK still has both versions available ....
    IF 2 = 1 THEN 1 = 0

  14. #74

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    You could just drop a piece of brass, steel or aluminum, thick enough to make contact, into the body in front of the momentary and it will work.
    Last edited by jorgen; 04-20-2012 at 11:24 AM.

  15. #75
    Flashaholic* archer6817j's Avatar
    Join Date
    Aug 2010
    Location
    Mountain View, CA
    Posts
    725

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Does anyone have both that could measure them and let us know what the difference in length is? A lucky fix would be if you could just get a #4 brass machine screw and stick it into the end of the plunger

  16. #76

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    jorgen--> thanks!!!
    I am using your idea from above for a temp fix, a tiny piece of Al wire seems to work for now. It's actually better than original?

    archer6817j-- The length of my plunger is 0.145. I noticed there are threads where the plunger passes thru to the QTC.

  17. #77

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Hey archer6817j (jason),
    I just realized you made the clip. It's realy cool, I had been using a nasty pen clip that was scraping my very kick-ass Peak.

  18. #78

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Another simple solution is to roll up a very small ball of aluminium foil. It makes the momentary switch magnitudes better. You might need to replace the aluminium foil ball occasionally but it is cheap.

  19. #79
    Flashaholic* Light11's Avatar
    Join Date
    Nov 2009
    Location
    The Great Northwest
    Posts
    1,169

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Do you have any with lanyard holes(Eiger clip)?
    Last edited by Light11; 05-12-2012 at 01:52 PM.

  20. #80

    Default

    pocket clip compatible for Peak EL Capitan / Logan Short Pocket Style ?

  21. #81
    Flashaholic* moeman's Avatar
    Join Date
    Jan 2003
    Location
    St. Louis, Missouri
    Posts
    786

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by uncle wong View Post
    pocket clip compatible for Peak EL Capitan / Logan Short Pocket Style ?
    No. It needs the screw in key chain or momentary tail.
    "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin

  22. #82
    Flashaholic* archer6817j's Avatar
    Join Date
    Aug 2010
    Location
    Mountain View, CA
    Posts
    725

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    A while back I saw a photo that compares the length of all the tailcap options (Peak lights) including the length difference between the "new" and "old" momentary switches...does anyone know where to find that?

    Thanks!

  23. #83
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,174

    Default

    Quote Originally Posted by archer6817j View Post
    A while back I saw a photo that compares the length of all the tailcap options (Peak lights) including the length difference between the "new" and "old" momentary switches...does anyone know where to find that?

    Thanks!
    It's on the Oveready website .... I'll PM you the link(s) -
    IF 2 = 1 THEN 1 = 0

  24. #84
    Flashaholic* archer6817j's Avatar
    Join Date
    Aug 2010
    Location
    Mountain View, CA
    Posts
    725

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Thanks!

    Quote Originally Posted by archimedes View Post
    It's on the Oveready website .... I'll PM you the link(s) -

  25. #85

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Has anyone used this clip on an Eiger Ultra x with the key chain tail? Is the power output range effected? I do not prefer the momentary switch, so I plan to buy the Ultra X without the switch. I really want a pocket clip though.

  26. #86
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,174

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    It looks like this has been asked and answered (indirectly, at least), but can anyone confirm whether or not the HDS version is slightly too narrow ( by < 1mm ) to work on a NovaTac ??

    Would it be possible to widen the opening enough to fit, and still work ?

    Haven't been able to find a Moddoo or wvaltakis2 for my NovaTac, and was hoping this might work ...
    IF 2 = 1 THEN 1 = 0

  27. #87
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,174

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by archimedes View Post
    It looks like this has been asked and answered (indirectly, at least), but can anyone confirm whether or not the HDS version is slightly too narrow ( by < 1mm ) to work on a NovaTac ??

    Would it be possible to widen the opening enough to fit, and still work ?
    ....
    Bump ... helloooo ... anyone ?
    IF 2 = 1 THEN 1 = 0

  28. #88
    Flashaholic* think2x's Avatar
    Join Date
    Jul 2009
    Location
    Pulaski, Va.
    Posts
    1,431

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by archimedes View Post
    It looks like this has been asked and answered (indirectly, at least), but can anyone confirm whether or not the HDS version is slightly too narrow ( by < 1mm ) to work on a NovaTac ??

    Would it be possible to widen the opening enough to fit, and still work ?

    Haven't been able to find a Moddoo or wvaltakis2 for my NovaTac, and was hoping this might work ...
    Yes, it can be done. I did it to one of mine using a dremel with a sanding drum on it.

  29. #89
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,174

    Default Re: AVAILABLE NOW: HDS and Peak Eiger Ti Pocket Clips

    Quote Originally Posted by think2x View Post
    Yes, it can be done. I did it to one of mine using a dremel with a sanding drum on it.
    Thanks very much for that info

    EDIT - I was able to successfully mod this clip, too.
    Last edited by archimedes; 05-25-2013 at 06:11 PM.
    IF 2 = 1 THEN 1 = 0

  30. #90
    Flashaholic creyc's Avatar
    Join Date
    Aug 2009
    Location
    Tampa, Florida
    Posts
    362

    Default

    Are these clips for the Eiger still available?

    I'd very much like one!

    [edit] found the link! Durr me.
    Last edited by creyc; 07-24-2013 at 03:33 PM.

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •