Malkoff
Results 1 to 10 of 10

Thread: Where can I get a 9P bored to

  1. #1

    Default Where can I get a 9P bored to

    Run on 2 IMR 18500's to make a super bright incan monster?
    Fenix LD01 R4, E05 R4, PD31, TK20, TK35, E11, Jetbeam BC25, RRT-0, Klarus NT20, iTP A3 R5, A3 Ti S2, 4Sevens Preon 1, Quark X 123^2, Sunwayman V10R Ti, Surefire G2X Tactical, ThruNite TN31, Mag-Lite XL50, Mag 2D XP-E

  2. #2
    Flashaholic*
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    885

    Default Re: Where can I get a 9P bored to

    Well I could post some sarcastic reply about 384 posts and you can't use the seach feature, but I wont.

    This should help you out:

    http://www.candlepowerforums.com/vb/...boring-service
    List of lights removed to allow the search engine to work

  3. #3

    Default Re: Where can I get a 9P bored to

    Well I was also wondering will the length be fine? As far as I know 3 CR123's=2 18500's but thats only in lights made for them I have never delt with mods before. Also whats my options for bulbs? and would I need a head with more heat sinking?
    Fenix LD01 R4, E05 R4, PD31, TK20, TK35, E11, Jetbeam BC25, RRT-0, Klarus NT20, iTP A3 R5, A3 Ti S2, 4Sevens Preon 1, Quark X 123^2, Sunwayman V10R Ti, Surefire G2X Tactical, ThruNite TN31, Mag-Lite XL50, Mag 2D XP-E

  4. #4
    Flashaholic*
    Join Date
    Nov 2005
    Location
    New Zealand
    Posts
    885

    Default Re: Where can I get a 9P bored to

    I use two 17500s in my my 9P, so I would expect that they will be ok, but I've never used IMR 18500s so I can't be 100% sure there isn't any slight variation in the length.

    As for bulb options, I'd suggest looking at the lumens factory D26 lamps.

    You could use the IMR-9, you'd only get about 20 minutes I think, but it would be very bright.

    Or you could get the EO-9 or HO-9.
    List of lights removed to allow the search engine to work

  5. #5
    Flashaholic* yifu's Avatar
    Join Date
    Oct 2011
    Location
    Australia
    Posts
    713

    Default Re: Where can I get a 9P bored to

    If you want new 18650 bore 9Ps look here http://www.cpfmarketplace.com/mp/sho...BLK-amp-C3-BLK
    If you want to send your 9P in for boring look here
    http://www.candlepowerforums.com/vb/...-18650-battery
    or here
    http://www.candlepowerforums.com/vb/...boring-service
    There is one more run by Overready, all should run at around 30 dollars or so.

  6. #6
    Flashaholic* yifu's Avatar
    Join Date
    Oct 2011
    Location
    Australia
    Posts
    713

    Default Re: Where can I get a 9P bored to

    And hardcore hotwires would know that the E09 or the H09 are not very bright, the brightest option would be to get a D26 socket/reflector from FiveMega here http://www.candlepowerforums.com/vb/...-Ready-to-ship
    and either a 1185 or a 1794 bulb from the cpfmarketplace. Both are around 1000 lumens and still have the same runtimes as the H09, because they are halogens, not xenons and therefore more efficient.

  7. #7
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,556

    Default Re: Where can I get a 9P bored to

    Quote Originally Posted by ScaryFatKidGT View Post
    Where can I get a 9P bored to Run on 2 IMR 18500's to make a super bright incan monster?
    Here

  8. #8

    Default Re: Where can I get a 9P bored to

    So lumens factory or 1794? Man lumens factory has a ton of lower output bulbs which I will get one for longer run times but what should I get for my Super high-output monster?
    Last edited by ScaryFatKidGT; 02-20-2012 at 06:21 PM.
    Fenix LD01 R4, E05 R4, PD31, TK20, TK35, E11, Jetbeam BC25, RRT-0, Klarus NT20, iTP A3 R5, A3 Ti S2, 4Sevens Preon 1, Quark X 123^2, Sunwayman V10R Ti, Surefire G2X Tactical, ThruNite TN31, Mag-Lite XL50, Mag 2D XP-E

  9. #9

    Default Re: Where can I get a 9P bored to

    Quote Originally Posted by yifu View Post
    And hardcore hotwires would know that the E09 or the H09 are not very bright, the brightest option would be to get a D26 socket/reflector from FiveMega here http://www.candlepowerforums.com/vb/...-Ready-to-ship
    and either a 1185 or a 1794 bulb from the cpfmarketplace. Both are around 1000 lumens and still have the same runtimes as the H09, because they are halogens, not xenons and therefore more efficient.
    Will the beam still have a good profile making my own drop in like that? Are all Lumensfactory bulbs xenon?
    Fenix LD01 R4, E05 R4, PD31, TK20, TK35, E11, Jetbeam BC25, RRT-0, Klarus NT20, iTP A3 R5, A3 Ti S2, 4Sevens Preon 1, Quark X 123^2, Sunwayman V10R Ti, Surefire G2X Tactical, ThruNite TN31, Mag-Lite XL50, Mag 2D XP-E

  10. #10

    Default Re: Where can I get a 9P bored to

    BUMP

    I'm getting the Overedy cryos bessel, help me pic a bulb(s)
    Fenix LD01 R4, E05 R4, PD31, TK20, TK35, E11, Jetbeam BC25, RRT-0, Klarus NT20, iTP A3 R5, A3 Ti S2, 4Sevens Preon 1, Quark X 123^2, Sunwayman V10R Ti, Surefire G2X Tactical, ThruNite TN31, Mag-Lite XL50, Mag 2D XP-E

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •