Elite Flashlights - The Best LED Flashlights, Chargers and Batteries
Page 1 of 7 1234567 LastLast
Results 1 to 30 of 181

Thread: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread NEW PILL AND REFLECTOR AVAILABLE

  1. #1

    Default xxx

    Please read the entire post 1 before you order!

    THE DROP INS IN THIS SALE THREAD ARE VERY HOT! I AM NOT RESPONSIBLE FOR ANY POSSIBLE INJURIES, FIRE HAZARDS OR ANY POSSIBLE MISHAPS. DO NOT ALLOW ANYONE TO OPERATE THESE DROP INs WITHOUT COMPLETE UNDERSTANDING OF THE HEAT RISK AND DANGER INVOLVED. YOU THE BUYER/USER ARE FULLY RESPONSIBLE FOR THE USE OF THE DROP IN SOLD IN THIS THREAD. Please read and follow the warnings in this entire post before purchase. Thank You!

    HELLO HELLO HELLO


    Below are Run 1, 2, 3, 4, 5, sale threads. You may refer to these thread as reference.

    XML-U2 Run 1:
    http://www.cpfmarketplace.com/mp/sho...U2-P60-Drop-In

    XML-U2 Run 2:
    http://www.cpfmarketplace.com/mp/showthread.php?6288-9.19.11-Run-2-Modded-XML-U2-1000-Lumen-P60-Drop-in

    XML-U2 Run 3:
    http://www.cpfmarketplace.com/mp/showthread.php?256849-10.3.11-Run-3-Modded-XML-U2-1000-Lumen-P60-Drop-in-DECLARE-WINNER-TONIGHT-12pm

    Market Moved to Custom/Here XML-U2 Run 4:
    http://www.cpfmarketplace.com/mp/s: howthread.php?257414-!!!Moved-to-CPF-
    Custom!!!-Run-4-Modded-XML-U2-1000-Lumen-P60-Drop-in-FREE-GIVE-AWAYS

    XML-U2 Run4:
    http://www.candlepowerforums.com/vb/showthread.php?325104-New-Year-SPECIALS!-Custom-P60-XML-1000-Lumen-Drop-in-Warm-Neutral-CoolWhite

    XML Run 5:
    http://www.candlepowerforums.com/vb/showthread.php?329934-Vinhnguyen54-Run-5-Cree-XML-P60-Drop-In-1000-Lumen-McClicky-Switch

    Tips & Background
    - How to clean a P60 reflector:
    http://www.candlepowerforums.com/vb/...-P60-Reflector

    - How to wrap a P60 Drop in:
    http://www.candlepowerforums.com/vb/...-A-P60-Drop-In

    - XML-T6 Current VS Lumen Charts?
    Click Here

    - How to Prep a MCclicky switch for a Solar Force Host:
    http://www.candlepowerforums.com/vb/showthread.php?334398-vinhnguyen54-Modding-McClicky-a-Switch-for-Solar-Force-Hosts&p=3891784#post3891784

    General Guidelines that applies to all of my P60/D26 XML Drop in


    - Please wrap the drop in tightly with aluminum foil before inserting it into your host. PM me if you are unsure how to do this.
    - Free Shipping World Wide
    - Please refer to the link above for references
    - About 1000 LED Lumen at 4.2A
    - When you order please let me know if you want OP or Smooth reflector.
    - For direct drive drop in: 3-4.2V Only. Please Use IMR123, IMR14500, and regular 18650. No 26650 or cells that are bigger than 18650 size.
    - Thermal Injection by default
    - Please include your CPF name and Shipping address
    - I take money order too
    - Orange Peel reflectors has best beam with sacrifice of some throw. The orange peel effect is actually on the light side.
    - Smooth reflectors are great for THROWS but beam profile not as perfect as OP. The reflectors I use allow the LED to go in deeper into the reflectors so the lights focus better


    McClicky Switch - These switch are good for 5A of current
    $7 with drop in order. If purchase separately must buy at least 3. All the switch I sell will be prep for Solar Force host as discussed above.



    5 Driving Options are available with each in a different color below

    3 Mode Regulated High Volatge: 3-8.4V
    High-Medium-Low - 100%->60%->10%
    Amp Draw: Approximately 3A (Will update when correct numbers are recorded)

    $40

    1 Mode Direct Drive Low voltage, cheap, max brightness: 4.2V Max
    Solder Filled is an option for direct drive drop in only and it cost $5 extra. Thermal Injection by default for all drop in sold in this thread is solder filled is not bought. Solder Filled greatly help with heat sinking.

    $30


    Multi-Mode High Current & Low Voltage option
    : 2.7-4.5V max
    I have acquired a new regulated driver and it can he program in the following options. When ordering please an option from each of the “Section” below. Also include your name, address, and build order details in your PayPal description. Thanks!

    Section 1) LED Choice


    1. T6 WARM 4000K,
    2. NEURAL 5000K,
    3. U2 COOL WHITE 6500K


    Section 2) Current/Amp Choice



    • I can set the circuit driver from 380mA -5,840mA
    • 380ma-3,040mA = Free
    • To set from 3,040mA up to 5,840mA please add $1 per 350ma increment
    • Example: 3,040mA + 350mA*3= 4,090mA => + $3 to price
    • XML produce 1000 LED lumen at around 4,200ma


    Section 3) Program Options
    A: Last mode memory
    B: No mode memory

    1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    3) High, Medium
    4) High, 10hz Strobe
    5) Medium, High, 2hz Blink
    6) High, Medium, 2Hz Blink
    7) Moonlight, Medium, High
    8) High, Medium, Moonlight


    • Moonlight 3mA-5mA so its very dim
    • Medium = 35% power so it’s good for normal use
    • High = 100% the current power you choose
    • The driver Operates from 2.5-4.5V
    • Under 2.8V the output will automatically reduce to 35% and blink once a minute
    • 1x Li-ion or 3xNiHM only. 2*CR123 or 2*Li-ion = Poof= Dead Drive/LED


    Section 4) Reflector Choice

    AA) Smooth= Best throw, Slight donut hole effect, Most OTF Lumen
    BB) Textured Reflector or Orange Peel Reflector = Gorgeous beam, no to minimum donut hole, Less OTF lumen, Less throw,

    Price: $40 base price for up to 3,040mA


    1 Mode High Voltage & Low Current :
    3-18V

    - Regulated Single Mode pull 1.5-2.2A Not the brightest options has a big voltage range. Same brightness with 1 li-ion, 2 li-ion 3 li-ion, or 4 li-ion.
    Price: $45 with a "Reflector Choice" from section 4 above and free basic thermal injection.

    Multi-Mode High Current and Medium Voltage: 2.8-6V
    - 2800mA - 5600mA
    - Low-Medium-High with memory
    - Low-High with memory
    - Low-Medium-High-SOS-Strobe with memory
    - Low-High-Strobe with memory

    • I can set the circuit driver from 350mA -5,600mA
    • 350ma-2800mA = Free
    • To set from 2800mA up to 5,600mA please add $1 per 350ma increment
    • Example: 2800mA + 350mA*4= 4,200mA => + $4 to price
    • XML produce 1000 LED lumen at around 4,200ma

    - Choice of Smooth or OP reflector
    $40 based price for 2800mah

    1 Mode High Current and Medium Voltage: 2.8-6V
    350mah-5600mah
    $40 based price for 2800mah


    I will take Paypal, Checks or Money Order. Thanks!

    Paypal Email: seattlecraigslist.com@gmail.com

    Need XPG, XRE, XPE, SST-50 SST-90? PM Me!

    Have a light you want modded/upgraded? PM Me!


    Want modding Tip & Tricks? PM Me!

    ---------------------------------------------------
    3.26.2012 Update


    I just got a new type of smooth reflector for XML LEDs and this one is now my current best. Here is why:

    - Larger brass pill for better immediate heat sinking
    - Shallow reflector for a MUCH WIDER spill beam
    - Same great throw as before but with a larger hot spot. It's the diameter of a reflector that primarily determines the hot spot intensity for a LED set up. Thus, same diameter reflector but less deep = equivalent throw and wider spill beam. Now you got a flood and throw both in one drop in!
    - Excellent beam profile. Beautiful intense hot spot with a wide spill beam and no artifacts. (I love this new reflector!)
    - Mirror smooth aluminum finish is flawless
    - Reflector is thicker and the pill has more threads so heat transfer is definitely better than before





    In my opinion, this reflector and pill set up is Superior in terms of performance and beam quality compared to all Smooth XML reflectors I have ever tested and sold.

    -----------------------------------------------------------------------------------------------------------------

    Last edited by vinhnguyen54; 06-15-2012 at 12:47 AM.

  2. #2
    Flashaholic* Henk_Lu's Avatar
    Join Date
    Oct 2007
    Location
    Golden Cage
    Posts
    2,008

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Hey Vinhnguyen54,

    I need two dropins I guess and according to your recommendations I wanna have :

    1 x cool white XML-U2 :
    - multi mode medium voltage
    - 4,2A
    - Low-Medium-High with memory
    - SMO Reflector
    = 44$

    1 x warm white XML-T6
    - multi mode medium voltage
    - 3,15 A
    - Low-Medium-High with memory
    - OP Reflector
    =41$

    Total : 85$ + international shipping 5$ = 90$

    Paypal sent!
    My way : From Maglite and drop-ins over Fenix & Co to the real things - Customs and Titaniums!

  3. #3
    Unenlightened
    Join Date
    Mar 2006
    Location
    Phila, Pa
    Posts
    12

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Hi Wayne,
    Same for me.... and thanks for your help. I had trouble deciding so I am also going with 2...

    Cool White U2 6500K
    multi-mode high current & low voltage option
    4,200mA
    no mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    smooth reflector
    McClicky
    =$50

    and

    Neutral 5000k
    3,040mA
    no mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    OP reflector
    =$40

    Paypal sent. Thanks Again!

  4. #4

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by oilp8ntr View Post
    Hi Wayne,
    Same for me.... and thanks for your help. I had trouble deciding so I am also going with 2...

    Cool White U2 6500K
    multi-mode high current & low voltage option
    4,200mA
    no mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    smooth reflector
    McClicky
    =$50

    and

    Neutral 5000k
    3,040mA
    no mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    OP reflector
    =$40

    Paypal sent. Thanks Again!
    Thanks! :-)

  5. #5

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Wayne, I would like the single mode drop in I asked about in my PM and a McClicky switch. I sent paypal for $47.00, if that was not the correct amount please let me know.
    A poll says that half of all Americans think the government is an immediate threat to their rights and freedoms. The rest were able to qualify for some sort of government assistance.

  6. #6

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    At the end of Run 5 you stated:
    Quote Originally Posted by vinhnguyen54 View Post
    ALL ITEMSFROM THIS RUN SHIPPED! I am going to start RUN 6 with some updates. Thanks all!
    Does this include mine?

    I had ordered a (1)XML-U2, 4.2 Amp, 1-mode, solder filled, 2.8-6Volt, BB reflector, P60 Drop In.
    PayPalPayment Sent Unique TransactionID # 9MB48025SB412354S on 2-16-2012.

  7. #7

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    What you gotten this package? 420857189500100024332043000286


    Quote Originally Posted by WDP View Post
    At the end of Run 5 you stated:


    Does this include mine?

    I had ordered a (1)XML-U2, 4.2 Amp, 1-mode, solder filled, 2.8-6Volt, BB reflector, P60 Drop In.
    PayPalPayment Sent Unique TransactionID # 9MB48025SB412354S on 2-16-2012.

  8. #8

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    I found your order. It's not ship yet because I am still waiting to build you two two XRE to go along with that U2. My new XRE batch hasnt arrive yet. Would you like me to ship just the U2 first?

    Quote Originally Posted by WDP View Post
    At the end of Run 5 you stated:


    Does this include mine?

    I had ordered a (1)XML-U2, 4.2 Amp, 1-mode, solder filled, 2.8-6Volt, BB reflector, P60 Drop In.
    PayPalPayment Sent Unique TransactionID # 9MB48025SB412354S on 2-16-2012.

  9. #9

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by vinhnguyen54 View Post
    What you gotten this package? 420857189500100024332043000286
    I did recieve that package. It was a 5-mode, not the 1-mode I requested.
    It was returned to you on 2-17-2012.
    USPS Confirmation # 03112550000263867133

  10. #10

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    If you think the XR-E parts will arrive soon, then I'll wait so you can send all the LEDs together to save on postage. If it will be a while, then please send what is ready now.

  11. #11

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Just in case anyone is interested. http://www.cpfmarketplace.com/mp/sho...l-Color-Lights

  12. #12

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Throw Beast for anyoen interested:
    http://www.candlepowerforums.com/vb/...p-SR91-De-Dome

  13. #13

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Hi,
    Lets try a 5 mode XML U2 4.2 Amp . I want a smooth reflector and potted if possible. Will be using 1 3100mah 18650. Thanks! $49 sent with paypal.

  14. #14

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by big4x4 View Post
    Hi,
    Lets try a 5 mode XML U2 4.2 Amp . I want a smooth reflector and potted if possible. Will be using 1 3100mah 18650. Thanks! $49 sent with paypal.
    Finished! Will ship on Monday. :-)

  15. #15

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by big4x4 View Post
    Hi,
    Lets try a 5 mode XML U2 4.2 Amp . I want a smooth reflector and potted if possible. Will be using 1 3100mah 18650. Thanks! $49 sent with paypal.
    Did you send me $5 extra for any reason?

  16. #16
    Enlightened
    Join Date
    Apr 2005
    Location
    CA
    Posts
    86

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    I will take it with the following specs:

    The brightest option, NEUTRAL 5000K XML ( XML produce 1000 LED lumen at around 4,200ma)
    Last mode memory
    Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    BB) Textured Reflector or Orange Peel Reflector

    Plus three (3) McClikys. PayPal has been sent. CPF name: Turboman7

    Thank you.

    I'll be using ONE of the following: 18650, 17500, or 17670.

  17. #17

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    I am assuming you want this: 1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon

    Mode Memory might make it hard to get to a constant brightness mode if you are in one of the blink. I strongly suggest no mode memory so that you would reset to moonlight as long as you are in any more for longer than 1 second.


    Quote Originally Posted by Turboman7 View Post
    I will take it with the following specs:

    The brightest option, NEUTRAL 5000K XML ( XML produce 1000 LED lumen at around 4,200ma)
    Last mode memory
    Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    BB) Textured Reflector or Orange Peel Reflector

    Plus three (3) McClikys. PayPal has been sent. CPF name: Turboman7

    Thank you.

    I'll be using ONE of the following: 18650, 17500, or 17670.

  18. #18
    Enlightened
    Join Date
    Apr 2005
    Location
    CA
    Posts
    86

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by vinhnguyen54 View Post
    I am assuming you want this: 1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon

    Mode Memory might make it hard to get to a constant brightness mode if you are in one of the blink. I strongly suggest no mode memory so that you would reset to moonlight as long as you are in any more for longer than 1 second.
    Since you recommend NO MEMORY, I'll go with number # 2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon.

    Why is the High, Medium, Moonlight repeated TWICE in the process? I first thought that it might have been a typo.

    Thx,

    Turbo

  19. #19

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    The constant brightness modes are repeated twice so that the blinkys wont easily interrupted normal use. Eagetac, 4sevens and some others does this too.

  20. #20

  21. #21

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread


    paypal sent for the below:
    multi-mode high current med voltage (2.8-6V), :: low-high, 2.8amp, OP reflector.

    Neutral (5000k) color.

    + mcclicky switch

    Thanks
    Russ

  22. #22

    Wink2 Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Got mine today! awesome as always, thanks again!!!
    Surefire 18650 Bored Hosts & Cerakote!
    I am visually impaired please excuse my typos =P

  23. #23
    Flashaholic* Phaserburn's Avatar
    Join Date
    Mar 2003
    Location
    Connecticut, USA
    Posts
    4,539

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    PM sent with questions.
    The Phaser: A nice EDC with great throw; heat and runtime can be issues.

    Best Diffusion Film!

  24. #24
    Flashaholic* Phaserburn's Avatar
    Join Date
    Mar 2003
    Location
    Connecticut, USA
    Posts
    4,539

    Default

    PayPal sent for one 3-18V driver, neutral 5000K XM-L, 2.2A, OP reflector.
    The Phaser: A nice EDC with great throw; heat and runtime can be issues.

    Best Diffusion Film!

  25. #25
    Flashaholic* Mattaus's Avatar
    Join Date
    Mar 2011
    Location
    Brisbane, Australia
    Posts
    1,681

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Hi Vinhnguyen54,

    Can I please confirm the price (including shipping to Australia) for the following:

    Multi-mode High Current, Low Voltage
    Neutral XM-L 5000K
    4,090mA (+$3)
    No mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    OP Reflector

    I'm assuming it's $43 + $5 shipping. Is this correct?

    Thanks!

    - Matt
    Last edited by Mattaus; 03-09-2012 at 11:28 PM.

  26. #26

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Correct :-)

    Quote Originally Posted by Mattaus View Post
    Hi Vinhnguyen54,

    Can I please confirm the price (including shipping to Australia) for the following:

    Multi-mode High Current, Low Voltage
    Neutral XM-L 5000K
    4,090mA (+$3)
    No mode memory
    Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    OP Reflector

    I'm assuming it's $43 + $5 shipping. Is this correct?

    Thanks!

    - Matt

  27. #27
    Flashaholic* Mattaus's Avatar
    Join Date
    Mar 2011
    Location
    Brisbane, Australia
    Posts
    1,681

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread



    Thanks!!!

  28. #28
    Flashaholic* Mattaus's Avatar
    Join Date
    Mar 2011
    Location
    Brisbane, Australia
    Posts
    1,681

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Wayne,

    Is it too late to change one aspect of my order above? I want the mode sequence to be High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon. Can it be changed to this or is it too late?

    Nothing else needs to change so the price should remain the same. Please let me know if this is possible.

    Thanks,

    - Matt

  29. #29

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    OK. I will re-adjust your drop in . :-)

    Quote Originally Posted by Mattaus View Post
    Wayne,

    Is it too late to change one aspect of my order above? I want the mode sequence to be High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon. Can it be changed to this or is it too late?

    Nothing else needs to change so the price should remain the same. Please let me know if this is possible.

    Thanks,

    - Matt

  30. #30
    Flashaholic* Mattaus's Avatar
    Join Date
    Mar 2011
    Location
    Brisbane, Australia
    Posts
    1,681

    Default Re: vinhnguyen54 D26/P60 XML Drop In Run 6 Sale Thread

    Quote Originally Posted by vinhnguyen54 View Post
    OK. I will re-adjust your drop in . :-)
    Thank you so much!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •