Titanium D36 Head for the 26650 Host! INTEREST!!

[TnC_Products]

I should be finishing up the heads today or Monday. I am trying for today before I leave work. If I do I will take it home to take some pictures for you. I should be able to ship out on Monday.

Chris

[TnC_Products]

As you can tell I didn't finish head before leaving on Friday. I just finished the heads this morning. I will take and post pictures tonight.

Chris

[TnC_Products]

Here are a couple pictures of your D36 Head.



Here it is with a smooth bezel ring.


Here it is next to mine with a Titanium Micro-Lux in between.


Here is one with 8 trit slots.

[KuanR]

I wish I had money right now

Would it be possible to make an adapter to fit this to a 18350 body without the need for another body?

[TnC_Products]

Hello KuanR,

I have been thinking about that as well from earlier conversations. I am not sure how it would look but it seems like I could make an adapter to go from the 18350 body to the larger 26650 D36 Head.

Chris

[OneBigDay]

The heads look great. The bezel ring decision is going to be a tough one The crenellations add a nice design and functional touch, but the smooth ring would be even better for carry. I'll stare at a few lights today and see if the decision works it's way into my brain.

That Micro-Lux is really sweet too but the timing is not right for me. I figure if you go a whole week without all 5 being accounted for I might take another look, but so far resisting. Looks great anyway and some folks should be really happy with those.

[easilyled]

Chris, have you tried your head with a Nailbender drop-in?
I'm interested to know whether the foam-rings and O-rings that are necessary to fit the drop-in in the M3 head are also necessary for your Ti head?
If the Nailbender drop-in fitted without any of the other stuff needing to be positioned on top of the reflector, that would be sweeter from my point of view.

[TnC_Products]

I recommend the Nailbender drop-in for these D36 Heads. No foam or anything is needed. I tried to design it to work similar to a P60 (D26) Drop-in.

Chris

[easilyled]

I recommend the Nailbender drop-in for these D36 Heads. No foam or anything is needed. I tried to design it to work similar to a P60 (D26) Drop-in.
Chris

The fact that it doesn't need any foam/o-rings is a huge bonus.
If you have any more heads available, I would be seriously interested.
Would the head fit straight on the D26 26650 light's body?
Would you be able to install tritiums?

[TnC_Products]

This head will fit directly on the 26650 battery tube. The D26 head and adapter would be removed from your 26650 host.

I don't have any stock on trits. If I did I am sure I could install them for you.

Chris

[OneBigDay]

PM sent with answers on head and bezel options. Thanks!

[OneBigDay]

for balance.

[OneBigDay]

Received the finished head end of last week. This thing is awesome. Thanks for the great work done very quickly!

[KuanR]

Can you post some pictures of it, I'm really interested to see what it looks like once attached to a host

[OneBigDay]

Here you go KuanR, just for you! TnC P60 v1 shorty (18350) | TnC 1x26650 Ti w D36 Head | TnC 1x26650 Aluminum w D36 Head
All with Nailbender dropin modules.

[KuanR]

Oooo very nice, thanks for the pics! How does it look if you put the D36 head on the shorty? That's the set up I want to get

[TnC_Products]

I will take a picture of mine tonight when I get home. That is the exact setup I made for myself.. Of course I have not put it completely together yet, but I have the Ti 26350 host with the D36 slotted head and crenulated bezel. I will post a picture of it tonight when I get home.

Chris

[KuanR]

Thanks Chris, looking forward to it!

[TnC_Products]

These few pictures don't give the light justice as I didn't have my tri-pod and I don't have the steady hand that I used to.

[chipwillis]

Now thats cool, wish I had one.

[TnC_Products]

I might be willing to part with mine right now as I have not done anything with it yet. That might change at any time though....