Unique Titanium
Page 2 of 6 FirstFirst 123456 LastLast
Results 31 to 60 of 175

Thread: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

  1. #31
    Flashaholic* karlthev's Avatar
    Join Date
    Nov 2004
    Location
    Pennsylvania
    Posts
    4,736

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    I was fortunate in scoring one of these. They are a great example of how good Chris's work is!



    Karl

  2. #32
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Hey y'all,

    Let me get this straight... This project required a 10 unit signup to get started and only got 3 ?!

    How can that be?

    I would SO be in for one of these + a 18350 if possible (like that killer Chip posted on page one)
    So 2 for me please.

    C'mon people, get on it!
    This is Ti flashporn impersonated, for Pete's sake !
    覧覧覧覧覧覧
    Tashi Bharucha Design

  3. #33
    Flashaholic dbleznak's Avatar
    Join Date
    Jun 2011
    Location
    Philly
    Posts
    477

    Default

    Bump!!!!!!!!

  4. #34
    Flashaholic exquzmwa's Avatar
    Join Date
    Jul 2011
    Location
    Colorado, USA
    Posts
    379

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    I'm in for one if this goes forward.

  5. #35
    Flashaholic* Henk_Lu's Avatar
    Join Date
    Oct 2007
    Location
    Golden Cage
    Posts
    2,008

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    That's what I've been looking for, a titanium P60 host!

    I'm in, but unfortunately not now, it'll take me 2 months to get the necessary budget. As there only have been 3 preorders in over half a year, there's a chance it'll take some time, until you reach the necessary 10 units. I don't understand why there's not interest, perhaps nobody found it yet, like me, a friend just pointed me to your subforum.

    Actually, I see the list is not updated and there are alreday more than 3 interests. Chris should definetely have a look at this thread again...
    My way : From Maglite and drop-ins over Fenix & Co to the real things - Customs and Titaniums!

  6. #36
    Flashaholic dbleznak's Avatar
    Join Date
    Jun 2011
    Location
    Philly
    Posts
    477

    Default

    I'm in for 1

  7. #37
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    This seems like it might go forward. I am not sure if the first four people on the list are still iterested.

    Please state if you want the lanyard hole or not in the anti-roll tail.


  8. #38
    Flashaholic* chipwillis's Avatar
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    1,545

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    I would like one, be cool with v-3 head?

  9. #39
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    The V3 head does not flow as nice as the V1 head on this light but that is my opinion. The V3 head would be an additional $50.00 as it is lager diameter with more work. If people don't know what the V3 head looks like I can post a pic.

  10. #40
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Let's see the V3!

    I would be in for the lanyard hole but no hole would be fine too.
    I'm easy .
    覧覧覧覧覧覧
    Tashi Bharucha Design

  11. #41
    Flashaholic* chipwillis's Avatar
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    1,545

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Quote Originally Posted by TnC_Products View Post
    The V3 head does not flow as nice as the V1 head on this light but that is my opinion. The V3 head would be an additional $50.00 as it is lager diameter with more work. If people don't know what the V3 head looks like I can post a pic.

    You are probably right, I would take one as in the picture.

  12. #42
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Here is a picture of the V3 Head!
    Attached Images Attached Images

  13. #43
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Ooooh, that looks mean and clean!

    I'd be in for one if it's made available.
    Would probably need to see it on the 18650 body before I go for it though.

    You rock Chris! So glad this is moving along .
    覧覧覧覧覧覧
    Tashi Bharucha Design

  14. #44
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    I will take a picture of the V3 head on an 18650 body on Monday. I don't have my own light anymore so I will have to borrow one. I am always willing to sell mine when someone misses the sales thread. I figure if I really needed my own I could make another.

  15. #45
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Same goes for knifemakers buddy...
    We make knives for ourselves and eventually end up getting them out to the people.
    My personal record for holding on to one of my knives is 2 weeks!
    覧覧覧覧覧覧
    Tashi Bharucha Design

  16. #46
    Flashaholic* Morelite's Avatar
    Join Date
    Nov 2005
    Location
    Central PA
    Posts
    2,238

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Here Midnight Run, I can help with that combo.

  17. #47
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Slammin'!

    I own two with the regular head already so this is definitely the way to go for me this time around.
    Thanks Morelite!
    覧覧覧覧覧覧
    Tashi Bharucha Design

  18. #48
    Flashaholic dbleznak's Avatar
    Join Date
    Jun 2011
    Location
    Philly
    Posts
    477

    Default

    I'm in for 1 with lanyard hole and max trit slots !!!

  19. #49
    Flashaholic benben_stone's Avatar
    Join Date
    Jun 2009
    Location
    Gondwana
    Posts
    202

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Please accept my pre-order for a titanium P60 style all C-series light housing with anti-roll & titanium V3 head (as detailed in post #39) for $448
    As the pre-order link on your website does not allow any amendment to the head design, let me know how I may pay a deposit toward this light


  20. #50
    Flashaholic OtisCampbell's Avatar
    Join Date
    Aug 2009
    Location
    Boston
    Posts
    305

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    I picked up a blem leftover from the previous run so unfortunately I won't be able to fill out the 10th light.. I'm sure someone will be along soon enough, though...


    BTW: They're worth every penny.. and more!
    Last edited by OtisCampbell; 02-13-2012 at 04:15 PM.

  21. #51
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Ok. If you can pre-order your light you can use the link in the first post. I updated the site to show the optional V3 Head.

    If you can only put down half the payment them please send Paypal payment to: sales (@) ogazent.com
    Please include Your Name, CPF Handle, your Shipping Address, and also what the payment is for.

    I also added a couple more pictures on the first post as well. I will post them here also. This light will go forward...

    V3 Head with Straight Tail


    V1 Head with Straight Tail
    Last edited by TnC_Products; 02-13-2012 at 07:51 PM.

  22. #52
    Flashaholic benben_stone's Avatar
    Join Date
    Jun 2009
    Location
    Gondwana
    Posts
    202

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Well, I'm definitely in now!


    Transaction: 3HBXXXXXXXXXX931G

  23. #53
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    benben, Payment received. Thank you. Now if I can just get a few more payments by the end of the week I will order the material.

    Those that have not paid yet if you can please let me know what Head and Tail version you would like so I can start on them ASAP

    Head options: (V1), (V3)
    Tail Options: (Anti-Roll), (Anti-Roll with Lanyard Hole), (Straight)

  24. #54
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Hey Chris,
    I placed my order for two of these bad boys with V3 heads and anti roll tails!

    I'd still like one one of them to be a shorty please.

    BTW is that for RCR 123 or 18350 cells?
    Just out of curiosity .
    Last edited by Midnight Run; 02-14-2012 at 03:10 AM. Reason: Order placed.
    覧覧覧覧覧覧
    Tashi Bharucha Design

  25. #55
    Flashaholic dbleznak's Avatar
    Join Date
    Jun 2011
    Location
    Philly
    Posts
    477

    Default

    Hey Chris - are you going to do trit slots?

  26. #56
    Flashaholic* chipwillis's Avatar
    Join Date
    Nov 2007
    Location
    Minnesota
    Posts
    1,545

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    ID 04142534FL016840E.

    I went with anti roll, hole, v-1 head.

  27. #57
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Hello Midnight Run - I received your order and have noted the two different versions. One 18650 and one 18350/CR123. It is bored for 18mm Cell.

    I received the other two orders as well. Thank You. I will order the material today.
    Last edited by TnC_Products; 02-14-2012 at 07:41 AM.

  28. #58
    Flashaholic Midnight Run's Avatar
    Join Date
    Dec 2011
    Location
    Paris, France.
    Posts
    218

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Bitchin'!

    Hey Chris,

    Would you make me one with a tail cap like this one?



    In other words, non-anti-roll-anti-roll .

    Let me know.

    Tashi.
    覧覧覧覧覧覧
    Tashi Bharucha Design

  29. #59
    Flashaholic dbleznak's Avatar
    Join Date
    Jun 2011
    Location
    Philly
    Posts
    477

    Popcorn Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Chris, can you make sure that Fetie switches will fit? So it begins ...., now I've got to start saving up for a new VanIsle quad. WHO WANTS TRIT SLOTS?? I DO, I DO I be waiting with baited breath (I think that's the right expression) Thanks, Dan Transaction ID: 7HN5887176951315F

  30. #60
    Flashaholic*
    Join Date
    Mar 2003
    Location
    Southern California
    Posts
    935

    Default Re: Titanium P60 Style all C-Series Light Housing! ** 2nd Batch Interest **

    Midnight Run, I can make one of your tail caps like the one in the picture. Not a problem.

    dbleznak, I wasn't going to do trit slots in these lights. I could probably do trit slots in the V1 head and the tail caps. The trit slots would be $10.00 / slot for a 1.5mm x 5mm vial. Also, The FETtie switch should work but I don't have one anymore to test with.

Page 2 of 6 FirstFirst 123456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •