FS: Bezel removal tools for M3 and M6

[RPM]

Got your pymt. Thanks.
I'll ship them Thursday..

R-

Hi, sent you payment via PP for one M3 & M6 removal tool, let me know when you have shipped the tools.

Thanks,

Larry

[kland1234]

PP incoming for:

1) M3/KL2 Tool. Same as the original run seen here
$12 shipped US
Thanks

[taylor]

Hi, I will take the following items:
M3/KL2 Tool. $15 Int

M6/KT4 Tool. $30 Int

TOTAL: $45
Paypal sent. Thx

[RPM]

Shipped Monday...

PP incoming for:

1) M3/KL2 Tool. Same as the original run seen here
$12 shipped US
Thanks

[RPM]

Thanks... this will ship out Wednesday.

Hi, I will take the following items:
M3/KL2 Tool. $15 Int

M6/KT4 Tool. $30 Int

TOTAL: $45
Paypal sent. Thx

[LuxLuthor]

One M6/KT4 please.

$27 sent

[RPM]

One M6/KT4 please.

$27 sent

FYI, Shipped today

Down to 4 pc. Remaining on the M6 tools.

[LuxLuthor]

What great work! What is the material used? Feels like aluminum, but the black coating is awesome.

[RPM]

What great work! What is the material used? Feels like aluminum, but the black coating is awesome.

The aluminum is 6061-T6 (Normal stuff used on 90% of the products we make) Finish is just black Typ II anodize (not hard anodize)
I anodized these just so they wouldn't mark the stock bezels...

[akflash]

PP sent for one (1):
1) M3/KL2 Tool. Same as the original run seen here
$12 shipped US
Unique Transaction ID # 7V772749L8696200P

Thanks!

[RPM]

Packed up for the mail on Monday...

PP sent for one (1):
1) M3/KL2 Tool. Same as the original run seen here
$12 shipped US
Unique Transaction ID # 7V772749L8696200P

Thanks!

[Steve in SoCal]

I will take one M3 bezel tool and one M6 tool.

PayPal sent for $39

[RPM]

Thanks... will mail on Monday.

I will take one M3 bezel tool and one M6 tool.

PayPal sent for $39

[akflash]

RPM, thanks for making this great tool! Got my M3 bezel tool last week and had all three of my Z46's apart in no time after boiling for just a few minutes. Your tool fit them perfectly and left no marks at all on the bezels - or the tool! Now I'm all ready for some NB drop-ins.

[warubozu]

Can some explain to me what's this boiling process I've read being mentioned in many bezel/lens removal threads and is it a necessary process to get the job done? Thanks

[RPM]

Can some explain to me what's this boiling process I've read being mentioned in many bezel/lens removal threads and is it a necessary process to get the job done? Thanks

The head is placed in a zip lock type bag and placed in boiling water to heat it up. Maybe someone can chime in here that has done it.... I have always used a heat gun to heat up the head. Basically it helps break the thread locking compound used in stock heads. Without heat they can be a bear to remove.

[akflash]

That's all I did, placed the head in a zip lock freezer bag and boiled it for a few minutes. I removed it from the bag (head was totally dry) and placed it in my padded vice. The head was a little too hot to handle without gloves, but not hot enough to melt the padding on the vice jaws. The bezel twisted off easily, but felt like there was peanut butter in the threads. After it was all apart, I cleaned off the black thread blocker crud that was all balled up. I put it back together without any thread locker because I want to be able to open it again later. Once I settle on a drop in, I'll probably put thread locker on the two that are weapon light heads. I didn't actually try to remove the bezel before heating, and after doing the third head, I realized I should have tried it without heating just to see. But there was thread locker in all three of the heads I have.
Hope that helps!

[larryk]

PP sent for 1- M6/KT4 Tool.
Thanks, Larry.

[RPM]

PP sent for 1- M6/KT4 Tool.
Thanks, Larry.

Pymt received, this will ship on Tuesday.

Only 2 pc remain for the M6/KT4 size tools....

[larryk]

Thanks RPM, worked perfectly. Tried w/o heat first, no go. Once heated worked fine.

[thekwyjibo]

for 1 M3 tool and 2 M6 tools.

Thanks
Russ,

[RPM]

for 1 M3 tool and 2 M6 tools.

Thanks
Russ,

Thanks... I'll get this shipped tomorrow.

That will do it for the M6 tools... this run is all sold. Plenty of M3 tools in stock.

[alex96]

for 1 M3 bezel removal tool. Thanks.

[LE6920]

PP sent for 1 M3 tool, thx.

[RPM]

PP sent for 1 M3 tool, thx.

FYI... This shipped yesterday.

R-

[Reignman]

Hi,
I'd like one M3 tool please.
PP sent.

thanks

[RPM]

Hi,
I'd like one M3 tool please.
PP sent.

thanks

Got your payment, will ship Saturday... Thanks.

R-

[Reignman]

Got it today. Thanks for the fast turn around.

[Von-Overkill]

Do you still have any M3 removal tools left?

[RPM]

Yes... plenty of stock.

Do you still have any M3 removal tools left?