Need flashlight w/ substantial runtime for work

shawnf

Newly Enlightened
Joined
Mar 24, 2012
Messages
7
I dropped my light in deep water Friday--need a new one. It was a SureFire 100 lumen with 2 123s.
Most desired features are longevity for work--would like it to last 4 hours or more if possible--and a clip so it doesn't fall in again.
Thanks for the help.

Here is my checklist:

1) How would you prefer to purchase the light?

____I would like to purchase the light from a brick and mortar store. I am located in ______________.
____I will be mail-ordering or buying online, so this doesn't matter.


2) Budget: An easy question, but you may change your mind after answering the rest! :)

____Less than $25.
____Less than $50.
____Less than $100.
____Less than $150.
____Less than $300.
____I have no limit.
____I'm flexible, tell me what you gotJ.
____Other, please specify ________


3) Format:

____I want a flashlight.
____I want a headlamp.
____I want a lantern.
____I want a dive light.
____I want a portable spotlight.


4) Flashlight-specific format/size:

____Keychain size.
____Every day carry small (2-4 inches).
____Every day carry medium (4-7 inches).

____Holster carry.
____Big enough to need its own travel caseJ.
____I don't care.
____I don't know.
____N/A


5) Emitter/Light source:

____LED (known for efficiency, longevity, and compactness)
____Incandescent (known for superior color rendition)
____HID (known for max output, but often at the expense of size)
____I don't know.


6) Manufacturer:

____I want to buy a light from a traditional mass producing manufacturer that is ready to go out of the box.
____I would consider getting a light that is pieced together (for example a "host" or flashlight body from one manufacturer, and a "drop-in" emitter from another source). Under the right circumstances, this path can provide more options to the consumer to meet specific needs, and can often be easily upgradeable as technology improves.


7) What battery type do you want to use?

____I intend to use alkaline batteries (AAA, AA, C, D) (disclaimer, while it does not preclude all choices, these are not recommended for many of today's most powerful lights)
____I intend to use rechargeable nickel chemistry (NiCad, NiMH, NiZn)
____I intend to use lithium primary batteries (CR123, CR2, Energizer Advanced/Ultimate Lithium AA/AAA)
____I intend to use rechargeable lithium (li-ion) chemistry. Feel free to specify a size if you know which size you want (14500, RCR123/16340, 17500, 17670, 18650, etc.)
____I want a light with an integrated rechargeable battery. (Note: these choices may be very limited unless you are looking at spotlights)


8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is impossible).

____I want to navigate a dark room or read a map (0-10 lumens).
____I want to walk around an unlit rural area (50-150 lumens).
____I want to illuminate my entire backyard or a campsite (150-300 lumens).
____I want to illuminate an entire field, the neighbor's front yard several houses down, impress my friends and neighbors, etc. (300-700 lumens).
____I want ridiculous amounts of lumens (800+ lumens).


9) Throw vs. Flood: At what distance will you be most likely to use this light? Select all that apply.

____Less than 1 yard/meter (reading, other close work)
____Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
____5-20 yards/meters (check out a noise in the backyard)
____30-50 yards/meters (I have a big backyard)

____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)
____150+ yards (I want maximum throw possible)


10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum output).

____Up to 30 minutes (I want the brightest [and potentially smallest] light for brief periods)
____30-60 minutes (I have plenty of batteries just ready to be changed)
____90-120 minutes (Runtime is moderately important, but still not critical)
____3 hours + (I critically need this light to run on max for extended periods in between battery changes/charges).


11) Durability/Usage: Generally the old phrase "you get what you pay for" is very accurate for flashlights.

____Not Important (A "night-stand" light).
____Slightly Important (Walks around the neighborhood).
____Very Important (Camping, Backpacking, Car Glove-box).
____Critical (Police, Fire, Search & Rescue, Caving, Survival).

____I don't care.
____I don't know.


12) Switch Type and location (choose all that apply):

____I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
____I want a momentary switch (Predominantly for use with signaling and short bursts of momentary light only).
____I want a twisty switch (Tighten the head/tailcap to activate, and the light will stay on until the head/tailcap is loosened).
____I want a body mounted switch (near the head, like on a Maglite).
____I want a tail mounted switch (found on the majority of today's high end lights).
____I don't care.
____I don't know.
____Other, please specify____________________.


13) User Interface (UI) and mode selection. Select all that apply.

____A simple on-off with only one output level is fine for me.
____I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
____I want multiple light levels. (Some lights have 5-16 light levels.)
____I want a programmable light.
____I want a selector ring.
____I want a strobe mode. (Blinks to show location.)
____I want SOS mode.
____I want a beacon mode.
____I don't care.
____I don't know.


14)Material/Finish/Coating

____Plastic/composite body (this may limit your choices significantly).
____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today's flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).
____I don't care.
____I don't know.
____Other, please specify____________.


15) Special Needs/extras: Is there anything else you want or need that hasn't been mentioned? Select any below.

____Red filter (for preserving night vision).
____Other filter colors (Amber, Green, Blue, _________).
____Dedicated R/G/B secondary LEDs.
____"Hybrid" light (bright incandescent combined with long running LEDs)
____Pocket/belt clip
____Holster
____Wrist/Neck Lanyard
____Crenulated bezel
____Non-sparking Intrinsically Safe (IS) for use in explosive environments
 

Kestrel

Flashaholic
Joined
Oct 31, 2007
Messages
7,355
Location
Willamette Valley, OR
Hello shawnf, welcome to CPF. :wave:
I have moved your post into a separate thread in this subforum, hopefully folks will be able to come by before long with some helpful advice.

Best regards,
 
Last edited:

CarpentryHero

Flashlight Enthusiast
Joined
Jul 4, 2010
Messages
3,096
Location
Edmonton
Eagletac T20c2 XML if floody is ok, and Xpe if you want throw. Good clip and well priced, runtime will vary based on output.
Jetbeam, Streamlight, Fenix and Pelican make some 4aa lights that might be worth a look to get the runtime you want. Perhaps with a holster would do nicely ;)

:welcome:
 

rgoal30

Newly Enlightened
Joined
Jun 5, 2010
Messages
5
For something like this you may want to get a surefire e2l AA... It's a little more than you want to spend but it should last your whole workday if its on high the entire time. Plus it has a low mode for when you don't need the full 80 Lumens
 

Outdoorsman5

Flashlight Enthusiast
Joined
Mar 10, 2011
Messages
1,310
Location
North GA Mountains
Since you owned a Surefire you should look at the new 500 lumen dual output Surefire Fury. I saw it over at batteryjunction.com for close to $100.

Another brand to consider would be the Quark X 123x2 Tactical. Slim & easy to carry around. Nice tactical tail clicky switch. Excellent output for such a small light. The tactical UI (user interface) is nice, and would prolly suit you best. There are 5 output modes & 3 blinky modes to choose from, and you pick two of em to program into this light. So head tight is one setting and head loose is the other setting. Mine is programmed like this - head tight is max & head loose is low. Basically it's a high & low type light, but you can easily program it however you want.
 
Top