PEAK
Results 1 to 17 of 17

Thread: recc a modder for new brass Pamir head with aspheric lens

Hybrid View

  1. #1

    Default recc a modder for new brass Pamir head with aspheric lens

    Any members here willing to vouch for someone who can do this? The Pamir is a 2xaa light. its the larger of the 2 below. I would love it if I could use 2 3V primary batteries for more power but have no idea if its possible. The head of the Pamir is 1"OD


  2. #2
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,176

    Default

    I think that 6v will smoke the electronics in a Pamir ...

    Since the driver is potted in place, it would be rather difficult (not to say impossible) to modify.
    IF 2 = 1 THEN 1 = 0

  3. #3

    Default Re: recc a modder for new brass Pamir head with aspheric lens

    no I mean I want a whole new head with whatever kind of optic can handle that much juice. If the if the 6 volts thing is impossible then I still would want a totally new head with the aspheric, thanks

  4. #4
    Flashaholic*
    Join Date
    Apr 2008
    Location
    Cleveland,Oh
    Posts
    2,024

    Default Re: recc a modder for new brass Pamir head with aspheric lens

    Basically you want a custom head threaded for the Pamir body?

    You should post in the main custom builders and modders forum, and maybe try PMing Mac or Precisionworks.
    Great spirits have always encountered violent opposition from mediocre minds.
    -- Albert Einstein

  5. #5

    Default Re: recc a modder for new brass Pamir head with aspheric lens

    I like the size and balance of this light and also wanted a higher output but without spending big money. My solution was to run the light on a single 14500 with a dummy cell. It's noticibly brighter but maybe not bright enough for you.

  6. #6
    Flashaholic*
    Join Date
    Jan 2006
    Location
    Arnieland
    Posts
    2,309

    Default Re: recc a modder for new brass Pamir head with aspheric lens

    Is the light at the bottom of the pic an older brass Logan? Very nice looking.

    If you want a direct replacement for the Pamir, a NP300 XP-G with the AA battery extender will work. It's very bright and throwy for a reflector smaller than a D26. The NP600 with XM-L has the highest output.
    Last edited by dudemar; 06-26-2012 at 03:58 PM.
    Funniest CPF thread ever. I promise it'll make your day.

  7. #7

    Default Re: recc a modder for new brass Pamir head with aspheric lens

    Quote Originally Posted by jorgen View Post
    I like the size and balance of this light and also wanted a higher output but without spending big money. My solution was to run the light on a single 14500 with a dummy cell. It's noticibly brighter but maybe not bright enough for you.

    I'd love to try that. Ill research 14500's...don't know anything about them yet. Where did you get the dummy cell?

    BTW the smaller light is an El Capitan I partially de-knurled/and polished. Here it is again with another and some copper plates I made which make a double barrel unit of the two. One is the wide w/ gitd diffuser and the other narrow. Heavy but a really strong set.




  8. #8
    gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    4,610

    Default

    Does the Logan thread into a pyranese body?

  9. #9
    Flashaholic* archimedes's Avatar
    Join Date
    Mar 2011
    Location
    CONUS, arteriosus
    Posts
    3,176

    Default

    Quote Originally Posted by gunga View Post
    Does the Logan thread into a pyranese body?
    I don't think so .... Everest, K2, Pyrenees, and Ural are 18mm lights, but Logan-compatible series are 17mm (Rainier, McKinley, Pamir, etc.).
    IF 2 = 1 THEN 1 = 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •