Unique Titanium
Page 1 of 9 12345678 ... LastLast
Results 1 to 30 of 242

Thread: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE THREAD

  1. #1

    Default vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE THREAD

    This is a pre-order sale thread only. Assembly and shipment wont occur for another 2 weeks. I already have 5 Pre-order so I thought I put up this thread for those interested too. I will use three of the following drivers below with modes programability according to your preference. I will push HIGH to its max potential for which ever it may be. Due to the nature of warm tint LED I will most likely only be using OP reflector since those tend to produce relatively pleasant beams.

    Driver 1
    Mode Options:
    3.5-4.5V Max
    A: Last mode memory
    B: No mode memory

    1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon
    3) High, Medium
    4) High, 10hz Strobe
    5) Medium, High, 2hz Blink
    6) High, Medium, 2Hz Blink
    7) Moonlight, Medium, High
    8) High, Medium, Moonlight


    • Moonlight 3mA-5mA so its very dim
    • Medium = 35% power so it’s good for normal use
    • High = 100% the current power you choose
    • Under 2.8V the output will automatically reduce to 35% and blink once a minute
    • 1x Li-ion or 3xNiHM only. 2*CR123 or 2*Li-ion = Poof= Dead Drive/LED
    • Without memory the light will turn on to the first mode in the sequence if you were at ON any mode for longer than 1 second.


    Driver 2:
    Mode Options:
    3-6V Max
    - Low-Medium-High with memory
    - Low-High with memory
    - Low-Medium-High-SOS-Strobe with memory
    - Low-High-Strobe with memory
    3-6V max = 1*18650 or 2*CR123A , 2*Li-ion = Poof= Dead Drive/LED

    Driver 3:
    3-6V Single Mode


    Price: $37 Shipped World Wide

    Paypal: seattlecraigslist.com@gmail.com
    Last edited by vinhnguyen54; 05-09-2012 at 11:32 AM.

  2. #2
    Flashaholic* yifu's Avatar
    Join Date
    Oct 2011
    Location
    Australia
    Posts
    713

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Very nice indeed, how many LEDs did you order? I would be in for one!

  3. #3
    Flashaholic* CarpentryHero's Avatar
    Join Date
    Jul 2010
    Location
    Edmonton
    Posts
    2,829

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Id be up for 1 dropin with driver one A)last mode memory 7) moonlight med high




    Edit: PAYPAL Sent $37
    I'm glad I found CPF, I was beginning to think I was strange
    I'm a Canadian and a proud Flashaholic
    Thanks CPF, thanks Think2x

  4. #4
    *Flashaholic* easilyled's Avatar
    Join Date
    Jun 2004
    Location
    Middlesex, UK
    Posts
    5,456

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Quote Originally Posted by CarpentryHero View Post
    Id be up for 1 dropin with driver one A)last mode memory 7) moonlight med high
    This seems to be the best way to go in my opinion too.

    What would the high level be driven at and how many OTF lumens would it produce?
    Change is inevitable, except from a vending machine

  5. #5

    Default

    Vinh,

    Craig now has basic beam shots on the new Nichia 219 compared to a 3000k led. The Nichia is definitely much brighter and a beautiful neutral. I am looking forward to getting this led into a number of my lights as you already know.

    Regards

    Harry

    Sent from my smart phone using Tapatalk

  6. #6

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Transaction ID: 36298936FE533014H

    Hi Vinh (Wayne?),
    I'd take one Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60
    A)last mode memory, 7) moonlight med high, OP, High=as far as you can push it before the tint goes bad.

    Thanks, Mark
    CPF: Thatspec

  7. #7

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Quote Originally Posted by yifu View Post
    Very nice indeed, how many LEDs did you order? I would be in for one!
    Definitely got one for yah! Go ahead and place your order! :-)

  8. #8

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Quote Originally Posted by CarpentryHero View Post
    Id be up for 1 dropin with driver one A)last mode memory 7) moonlight med high
    Paypal received!

  9. #9

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    I am always excited to test out new LEDs! The XML was a revolution to me!

    Quote Originally Posted by Harry999 View Post
    Vinh,

    Craig now has basic beam shots on the new Nichia 219 compared to a 3000k led. The Nichia is definitely much brighter and a beautiful neutral. I am looking forward to getting this led into a number of my lights as you already know.

    Regards

    Harry

    Sent from my smart phone using Tapatalk

  10. #10

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Quote Originally Posted by Thatspec View Post
    Transaction ID: 36298936FE533014H

    Hi Vinh (Wayne?),
    I'd take one Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60
    A)last mode memory, 7) moonlight med high, OP, High=as far as you can push it before the tint goes bad.

    Thanks, Mark
    CPF: Thatspec
    Got it! Thanks!

  11. #11
    Flashaholic* CarpentryHero's Avatar
    Join Date
    Jul 2010
    Location
    Edmonton
    Posts
    2,829

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    You beat me to it, Paypal sent Vinh
    I'm glad I found CPF, I was beginning to think I was strange
    I'm a Canadian and a proud Flashaholic
    Thanks CPF, thanks Think2x

  12. #12
    Flashaholic
    Join Date
    Aug 2007
    Location
    New Jersey
    Posts
    235

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Paypal sent for driver 2, low- high with memory.

    Thanks

  13. #13

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Quote Originally Posted by Not So Bright View Post
    Paypal sent for driver 2, low- high with memory.

    Thanks
    Thanks!

  14. #14

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    PayPal sent for the following.

    Driver 1
    Mode Options:
    3.5-4.5V Max
    A: Last mode memory
    7) Moonlight, Medium, High

    Thanks Wayne!
    This is my signature. They're many like it but this one is mine..

  15. #15

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Thanks!

  16. #16

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    payment sent for one nichia drop in. driver 2 3-6v. lo,med,hi w/memory.
    thanks!

  17. #17

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    I ordered 16 Nichia LEDs. 11 has already been spoken for. Now I am really eager to see what this LED is all about!

  18. #18
    Flashaholic* Henk_Lu's Avatar
    Join Date
    Oct 2007
    Location
    Golden Cage
    Posts
    2,008

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    I need a high CRI module for a titanium host, this one sounds to be the one!

    Driver 1
    A: Last mode memory
    7) Moonlight, Medium, High

    Paypal sent!
    My way : From Maglite and drop-ins over Fenix & Co to the real things - Customs and Titaniums!

  19. #19

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    3-6V Single mode Driver Option added!

  20. #20

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Modding/Repair help for those interested:

    http://www.candlepowerforums.com/vb/...75#post3926575

  21. #21

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Paypal incoming for:


    Driver 1
    Mode Options:
    3.5-4.5V Max
    No Memory
    7) Moonlight, Medium, High
    Last edited by jrk; 04-18-2012 at 10:13 AM.

  22. #22

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Vinh,

    Paypal sent (Unique Transaction ID # ************2402S) for Driver 1, no memory, #7. If you are running low on emitters and need one for my drop-in, let me know. I ordered 30 bare emitters from Arek.

  23. #23
    Flashaholic
    Join Date
    Nov 2011
    Location
    Atlanta, GA
    Posts
    193

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Hi Vinh, Paypal sent for:

    Driver 1 - 3.5-4.5V
    A: Last mode memory
    7) Moonlight, Medium, High

    Thanks,
    Barry

  24. #24
    nfetterly's Avatar
    Join Date
    Oct 2008
    Location
    Cincinnati area, but lots of travel
    Posts
    2,358

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Driver 2:
    Mode Options:
    3-6V Max
    - Low-Medium-High with memory

    Would like high push as high as "reasonable" (presuming you can adjust it on driver 2) for extended use.

    pp sent
    Last edited by nfetterly; 04-18-2012 at 01:41 PM. Reason: pp sent


  25. #25

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Got all orders recorded!

  26. #26
    Flashaholic*
    Join Date
    Mar 2011
    Location
    SF Bay Area, CA
    Posts
    661

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Wayne,
    Sounds great.

    Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER
    Driver 2:
    Mode Options: 3-6V Max
    - Low-Medium-High with memory

    For use in an L2P with 2xCR123.

    PP just sent.
    Thanks!

    Regards,
    Tom

  27. #27

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Got it!

  28. #28
    Flashaholic
    Join Date
    Aug 2008
    Location
    Australia
    Posts
    388

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Is it possible to lower the medium mode of driver 1? Personally I like the moonlight but prefer a lower medium (maybe 15-20%) to go with the really low low.

    Cheers,
    Nova

  29. #29

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    It is possible but I don't have the computer equipment and skills to do it...Driver two do have great mode spacing though.

  30. #30
    Flashaholic* ma_sha1's Avatar
    Join Date
    Jan 2009
    Location
    CT, USA
    Posts
    3,040

    Default Re: vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE TH

    Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER

    Driver 2:
    Mode Options: 3-6V Max
    - Low-Medium-High with memory

    PP sent
    Last edited by ma_sha1; 04-19-2012 at 03:51 AM.
    My Mods.. http://www.candlepowerforums.com/vb/...5&postcount=78
    Hobby only, I don't do custom mods as a service, thanks for understanding.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •