vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE THREAD

[vinhnguyen54]

Changed!

If I can I'd like to change that to 1-A-1

Driver 1
Mode Options: 3.5-4.5V Max
A: Last mode memory
1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon

Sorry I didn't ask those questions first.
Thanks!

[THE_dAY]

Hi Vinh,

What is the high level set at?
I was wondering if you've tested these at 1000mA and feel the lumen increase is worth it to go up to 1500mA?
I had a sample of a similar LED tested (NVSL 119) and it was not worth it to go up to 1500mA because of the little lumen increase and heat.

Just curious to see how these NVSL 219s compare.

Thanks

[vinhnguyen54]

I have not done any testing. I will do current testing with my light meter and beamshots once the LED arrive. :-)

Hi Vinh,

What is the high level set at?
I was wondering if you've tested these at 1000mA and feel the lumen increase is worth it to go up to 1500mA?
I had a sample of a similar LED tested (NVSL 119) and it was not worth it to go up to 1500mA because of the little lumen increase and heat.

Just curious to see how these NVSL 219s compare.

Thanks

[ykb]

Re: Driver 2
If High is 100% power, what are the Medium and Low modes?
Also, will it achieve full power with 4.2V, or only with 6V?
Thanks

[vinhnguyen54]

Re: Driver 2
If High is 100% power, what are the Medium and Low modes?
Also, will it achieve full power with 4.2V, or only with 6V?
Thanks

Yes it will achieve full power with 4.2V. 18650 Is highly recommended. I think Medium is 30% and Low is 5%. I will check on that.

[vinhnguyen54]

List of names with order paid. If you paid and your names is not on here please let me know. Thanks all!

1. Ryan
   
2. Gregory
3. Tim
4. Ma
5. ---------
6. Dan
7. Tom
8. Barry
9. Neale
10. Chris
11. Thierry
12. Yolanda
13. Colby
14. Horst
15. Carlos
16. Brian
17. Mark
18. Kendall
19. ------
    

[grayhighh]

Miss look the list, sorry. Ignore this post.

[ToyTank]

Yeah good to go could you pull my name down though

[vinhnguyen54]

Yeah good to go could you pull my name down though

Done

[vinhnguyen54]

Yeah good to go could you pull my name down though

Done. I also deleted all last names.

[ToyTank]

Done. I also deleted all last names.

Thanks I got warrants

J/K

I don't mind first name or CPF handle


Wayne have you thought about making any pure flood mods with these? The diffuser film is still a nice touch though.

[vinhnguyen54]

Actually I have! I thorugh about shaving the reflector down but then the reflector would push aginst the glass which might break it! hmmm I don't have any machines so I cant do much...

Thanks I got warrants

J/K

I don't mind first name or CPF handle


Wayne have you thought about making any pure flood mods with these? The diffuser film is still a nice touch though.

[ykb]

Still deciding on the spec, thanks

[vinhnguyen54]

Still deciding on the spec, thanks

:-)

[somnambulated]

Hi Vinh, would you part the Nichia 119 LEDs separately for the same price as a drop-in? I'm thinking of installing one in my Sunwayman V10r Ti+. Also, barring the new spacer ring Will says is needed to install in his custom forum thread, do you have any idea if these would require anything other than desoldering the original SWM LED and soldering the Nichia to the driver?


Via iPhone & Tapatalk

[vinhnguyen54]

You can buy them for 7.50 from illuminationsupply

:-)

Hi Vinh, would you part the Nichia 119 LEDs separately for the same price as a drop-in? I'm thinking of installing one in my Sunwayman V10r Ti+. Also, barring the new spacer ring Will says is needed to install in his custom forum thread, do you have any idea if these would require anything other than desoldering the original SWM LED and soldering the Nichia to the driver?


Via iPhone & Tapatalk

[somnambulated]

Awesome, thank you

[nbjly]

Paypal inbound for 2

Driver 1-B, option 1

[vinhnguyen54]

Paypal inbound for 2

Driver 1-B, option 1

Thanks!

[vinhnguyen54]

1. Ryan
   
2. Gregory
3. Tim
4. Ma
5. ---------
6. Dan
7. Tom
8. Barry
9. Neale
10. Chris
11. Thierry
12. Yolanda
13. Colby
14. Horst
15. Carlos
16. Brian
17. Mark
18. Kendall
19. ------
20. John
21. Richard

Updated!

[vinhnguyen54]

Still deciding on the spec, thanks

Decided on the modes yet? :-)

[ykb]

Decided on the modes yet? :-)

Driver 2 with Low-Medium-High with memory, please.
Thanks

[rkboid]

Paypal sent

Driver 1
A
7

Can anybody recommend a host? this is my first drop-in.

[vinhnguyen54]

Look what's in the mail today!




I will begin testing them today to see how they perform at different currents.

[F250XLT]

[F250XLT]

Can anybody recommend a host? this is my first drop-in.

Hard to go wrong with a Surefire 6P or C2, I have a C2. Solarforce looks to have some less expensive alternatives, but the possibilities are endless.

[vinhnguyen54]

Hard to go wrong with a Surefire 6P or C2, I have a C2. Solarforce looks to have some less expensive alternatives, but the possibilities are endless.

Solarforce L2T If you don't want to spend big bucks. Surefires cost a lot to get bored too...

[vinhnguyen54]

1st Beam Shot: Perfect focus hot spot with a flawless spill. A truly beautiful beam. Tint wise this is my new favorite neutral tint. I am not even saying this because I am selling these drop ins. The tint is just rreeaall pleasing to the eyes. The photos below reflect 90% accurately what I saw in real life. I will perform efficent current testings tonight and report back. I have to go to work now. More updates tonight.

[scout24]

Nice!

[F250XLT]

Looks very promising indeed.