vinhnguyen54 Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin P60/D26 PRE-ORDER SALE THREAD

[ToyTank]

5% should give well over 24hrs on a 18650 Good enough for me.

Besides you can never have enough drop-ins so CPF motto-Get Both!

[JoVo]

Hello,

I would like to order the following drop in with a Nichia NVSL219AT-H1 4500K, 92 CRI, B10 Bin.

Driver 1
Mode Options: 3.5-4.5V Max
B: No mode memory
8) High, Medium, Moonlight

Max current set to 1.2a please.

Thank you very much!
Jonas

[vinhnguyen54]

Thanks!

[af112566]

got mine today and it works great,,love the tint. thank you!!

[curlew]

Hi --- I'm new here, and I'd like to get one of these Nichia drop-ins if you still have the parts. Details:

1) It sounds like Driver #2, 3-6 V, Lo/Med/Hi is what you still have on hand, and thats fine for me.
2) I'd prefer a driver with memory, but it's not essential.
3) I'd like the drive current to be backed off a bit from your nominal 1.52 A, say somewhere around 1.0--1.2 A.

Thanks!

[Diablo_331]

I received my dropin today Wayne. Huge props on this one! This is my new favorite tint and beam. Wonderful work.

[vinhnguyen54]

Got plenty of parts :-)

Hi --- I'm new here, and I'd like to get one of these Nichia drop-ins if you still have the parts. Details:

1) It sounds like Driver #2, 3-6 V, Lo/Med/Hi is what you still have on hand, and thats fine for me.
2) I'd prefer a driver with memory, but it's not essential.
3) I'd like the drive current to be backed off a bit from your nominal 1.52 A, say somewhere around 1.0--1.2 A.

Thanks!

[run4jc]

OK - I'm impressed. Mine came today - a 3-6V low/med/high with memory. Beautiful beam, beautiful tint. I measure 10/70/200 lumen in my sphere. This in an old Surefire 6P with a single AW RCR 123 and a dummy 123 cell. Nice job, thank you!!

[af112566]

run4jc,,what amperage is your module?

[Thatspec]

I thought it seemed pretty bright (mines at 1.5A, one 18650). Can't tell any difference between it and the xpg in my V10r, just can't stand to look at the v10r's tint any longer (so now it's getting modded to a 219). Very nice drop in Wayne, couldn't be happier!

[run4jc]

run4jc,,what amperage is your module?

Stock - 1.52...

UPDATE - so good I was compelled to order a couple of low priced Solarforce hosts - an L2 and whatever the 18650 version is. Between Vinhn and Na***en**r's modules, you can build an AWESOME flashlight for around $50. Ain't it a great time to be a flashaholic!!

[af112566]

yes,,i have a few solarforce hosts and love em!!!my nichia is in a l2t and its very nice..

[tjswarbrick]

Got it!

I got the drop-in today.
Used it tonight in my L2P. I appreciate the spring.
It is just fabulous - a tighter hotspot than my neutral XM-L, nice smooth transition, looks just as bright, with a slightly warmer tint and such vivid color rendering.
I couldn't be happier.

Thank you.

Regards,
Tom

[Harry999]

Or if you want Vinh will actually build the flashlight for you and fine tune it to the purpose you want to use it for!

Stock - 1.52...

UPDATE - so good I was compelled to order a couple of low priced Solarforce hosts - an L2 and whatever the 18650 version is. Between Vinhn and Na***en**r's modules, you can build an AWESOME flashlight for around $50. Ain't it a great time to be a flashaholic!!

Sent from my GT-I5800 using Tapatalk 2

[vinhnguyen54]

That's right :-) Sometime with a price that is cheaper than you were to put together yourself too ;-)

Or if you want Vinh will actually build the flashlight for you and fine tune it to the purpose you want to use it for!







Sent from my GT-I5800 using Tapatalk 2

[run4jc]

That's right :-) Sometime with a price that is cheaper than you were to put together yourself too ;-)

We'll be chatting soon!

[ToyTank]

Got my drop-in today. Looks well done.

High @1.5A is noticably brighter than M61 219. Reflector gave a even flood with very slight rings and surprisingly good throw. Very pleased I may get another when moon mode drivers are back in stock.

Does driver 2 3-6V does it have low voltage cut-off?

Thanks!

[vinhnguyen54]

I am not sure if there is low voltage cut off but the light should blink once every so often at 2.7V to let us know to change battery.

Got my drop-in today. Looks well done.

High @1.5A is noticably brighter than M61 219. Reflector gave a even flood with very slight rings and surprisingly good throw. Very pleased I may get another when moon mode drivers are back in stock.

Does driver 2 3-6V does it have low voltage cut-off?

Thanks!

[ToyTank]

Double post 2 hours later WTH?

Thanks Vinh!

[arcane]

Driver2: 3-6V Max
Mode: Low-Medium-High with memory
Current: 1.52A on High

[mikeyx]

I'd like one.

Driver 1
3.5-4.5V Max
No mode memory
Low, Medium, High
1.52 A

PayPal incoming.

Thanks,
Mike

[F250XLT]

Hello Everyone!

I just ran out of the 2.5-4.5V Driver with Moonlight-Medium-High. I only have 2.8-6V Low-Medium-High Drivers left. The following names could get this driver unless you would like to wait. For oversea shipment. Please let me know.

1) Ryan
2) Tom
3) Levi
4) Ma
5) Tim
6) Michael
7) Tammiie
8) Brian
9) Carlos
10) Neale
11) Dan

If your name is not on the list your order has been shipped as requested.

Any update as to when the parts will come to get these completed?

[vinhnguyen54]

All orders Shipped tonight! :-)

I also got more parts for more orders!

[F250XLT]

All orders Shipped tonight! :-)

I also got more parts for more orders!

Awesome, I'm looking forward to receiving it.

[run4jc]

Guys and Gals, I gotta tell ya...this is a fantastic light engine. I put mine in a lowly, stock Solarforce L2M with no extension - short form factor with an 18350 cell. It's awesome. It reads just over 200 lumen on high in my sphere (10/70/200), and has a perfect (for me) tint, or lack thereof. I'm loving this Nichia 219 in every light that I own that uses it!

The deep reflector gives this thing great throw, yet it isn't too 'harsh' to use inside. Yep, this is a tremendous value and a superbly useable light!

[vinhnguyen54]

:-) Now Nichia needs to make the same tint but a larger die XML competitor or better yet someone make a SST-90 competitor already. I am swapping out all of my CREE XPG with these Nichia too. :-)

[af112566]

ill take one nichia 219 4500k module,,
driver 1 3.5-4.5v
moon.med,hi w/memeory
1.4amp
op reflector.
payment sent !!.
thanks..

[climberkid]

I'll order one if you have the 1st driver with memory and mode 7. Run at 1.75A maybe?

If you can fill this order let me know.


Alex

[vinhnguyen54]

I have plenty of that drivers now. I can ship as soon as tomorrow. :-)

I'll order one if you have the 1st driver with memory and mode 7. Run at 1.75A maybe?

If you can fill this order let me know.


Alex

[PoliceScannerMan]

Hi Vin, after a pm from one of my forum buddies about your 219, I'm here for one. Your drop ins are great!



Policescannerman Nichia 219
Driver 1 with no memory mode 7
Moon/med/high